1. Introduction
The XinYi Sini Audio XY-301W is a versatile Mono 30W Bluetooth Digital Audio Amplifier Board designed for high-fidelity sound reproduction. It features Bluetooth 5.2 for stable wireless connectivity, multiple input options including AUX and USB drive, and supports TWS (True Wireless Stereo) technology for dual-board stereo sound. This manual provides detailed instructions for setting up, operating, and maintaining your amplifier board.

2. Product Features
- Bluetooth 5.2 Connectivity: Ensures stable wireless connection and smoother audio transmission.
- Multiple Input Options: Supports Bluetooth, AUX, and USB drive to cater to diverse audio scenarios.
- TWS True Wireless Stereo Technology: Allows dual-board pairing for immersive stereo sound effects.
- High-Efficiency Digital Amplifier: Delivers up to 30W of output power with powerful, clear sound quality.
- High-Fidelity Sound: Supports lossless decoding of WAV/FLAC/APE/MP3 formats for an enhanced audio experience.
- Enhanced Design: Features multi-interface configuration, an enhanced IC chipset, and a rear-mounted heat sink for higher cooling efficiency.



3. Specifications
| Parameter | Value |
|---|---|
| Product Model | XY-301W |
| Power Supply | DC 9-24V/3A or higher |
| Bluetooth Version | 5.2 |
| Audio Channels | MONO/TWS |
| Audio Input | Bluetooth 5.2 / AUX / U disk |
| Bluetooth Audio Decoding | AAC/SBC |
| USB Lossless Decoding | WAV/FLAC/APE/MP3 |
| Output Power (4Ω) | 20W @ 12VDC, 30W @ 16VDC |
| Output Power (8Ω) | 10W @ 12VDC, 30W @ 24VDC |
| Dimensions (Integrated Panel Version) | 56mm x 52mm x 23mm (2.20in x 2.04in x 0.90in) |
| Knob Size | 17mm |


4. Package Contents
The product is shipped unassembled and requires self-assembly. The package typically includes:
- 1x XY-301W Power Amplifier Board
- 1x Power Adapter (specific type may vary)
- 1x Screwdriver (for assembly)
- (Optional, depending on version) Audio cable for external potentiometer version

5. Setup Instructions
5.1. Assembly
The XY-301W amplifier board is shipped unassembled. Please follow the visual guides provided in the package contents image (Figure 7) for your specific version (Integrated Potentiometer, External Potentiometer, or Integrated Panel) to assemble the board. A screwdriver is included for convenience.
5.2. Power Connection
Connect a DC 9-24V power supply with a minimum of 3A to the DC input jack on the amplifier board. Ensure the correct polarity.
5.3. Speaker Connection
Connect your speaker(s) to the SPEAKER output terminals on the board. For mono operation, connect one speaker. For TWS stereo operation, you will need two amplifier boards and two speakers.
5.4. Audio Input Connection
The board supports multiple audio input methods:
- Bluetooth: For wireless audio streaming.
- AUX IN: Connect an external audio source (e.g., smartphone, MP3 player) using a 3.5mm audio cable.
- USB Drive: Insert a USB flash drive containing WAV/FLAC/APE/MP3 audio files into the USB Audio port.
6. Operating Instructions
6.1. Bluetooth Connection
- Power on the amplifier board. The blue indicator light will flash rapidly, indicating it's ready for pairing.
- On your mobile phone or audio device, enable Bluetooth and search for available devices.
- Select "XinYi" from the list of devices to connect. Once connected, the blue indicator light may change its flashing pattern or become solid (depending on the specific board version).
- You can now play music from your device through the amplifier.

6.2. TWS (True Wireless Stereo) Pairing
To achieve stereo sound, you need two XY-301W amplifier boards. Follow these steps for TWS pairing:
- Power On: Power on both amplifier boards. The blue indicator lights on both boards will flash rapidly. Important: Do not pair with your mobile phone's Bluetooth, connect AUX, or insert a USB drive at this stage.
- Initiate Pairing: On one of the amplifier boards, press the volume knob four (4) consecutive times. The TWS red indicator light on this board will start flashing rapidly. The other board's blue indicator light will continue to flash rapidly.
- Confirm Pairing: Wait until the TWS red indicator light on the first board changes from rapid flashing to a solid ON state (this board is now the Master unit). Simultaneously, the blue indicator light on the second board will turn off, and its red indicator light will begin flashing slowly (this board is now the Slave unit). This confirms successful TWS pairing. If the red indicator light on the Slave unit turns off, pairing has failed; repeat step 2.
- Connect to Device: After successful TWS pairing, enable Bluetooth on your phone or audio device, search for "XinYi", and connect. Your phone will now play music in stereo through both paired amplifier boards. Alternatively, you can insert an AUX cable or USB drive into the Master unit to play music.
Canceling TWS Pairing: During TWS connection, press the volume knob on either amplifier board four (4) times consecutively to exit TWS pairing mode.
Note: When using the TWS function, always establish the TWS connection between the two amplifier boards first, and then pair your phone's Bluetooth. The TWS function operates in memory mode and will automatically reconnect to the paired board upon the next power-on.

6.3. Sinilink App Control
The Sinilink App allows you to change the Bluetooth name and set a pairing password for your amplifier board. After making changes in the app, remember to click the "Set" button to apply them.

7. User Tips
- Ensure your power supply meets the DC 9-24V/3A or higher requirement for optimal performance and to prevent damage.
- When using TWS, ensure both boards are powered on and in pairing mode before attempting to connect your phone.
- For best sound quality, use high-quality speakers and audio cables.
- Keep the amplifier board in a well-ventilated area to prevent overheating, especially during prolonged use at high volumes.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Incorrect wiring, no power, incorrect input selected, low volume. | Check all connections (power, speakers, audio input). Ensure the power supply is adequate. Increase volume on both the amplifier and the source device. |
| Bluetooth not connecting | Amplifier not in pairing mode, device too far, interference. | Ensure the blue indicator light is flashing rapidly. Move your device closer to the amplifier. Restart both devices. |
| TWS pairing fails | Incorrect pairing sequence, interference. | Follow the TWS pairing instructions carefully (Section 6.2). Ensure no other Bluetooth devices are connected during TWS pairing. |
| Distorted sound | Volume too high, poor audio source, speaker impedance mismatch. | Reduce volume. Try a different audio source. Ensure speakers are 4Ω or 8Ω as specified. |
| Board overheating | Inadequate ventilation, excessive load. | Ensure proper airflow around the board. Reduce volume or speaker load. |
9. Maintenance
- Cleaning: Use a dry, soft cloth to clean the amplifier board. Do not use liquids or abrasive cleaners.
- Storage: Store the board in a cool, dry place away from direct sunlight, moisture, and extreme temperatures.
- Handling: Handle the board with care to avoid damaging electronic components. Avoid static discharge.
10. Warranty and Support
For any issues or questions regarding your XY-301W amplifier board, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.