1. Introduction
The FDIK Panda-U7 Diesel Parking Heater is an all-in-one portable air heating solution designed for various applications, including camping, warehouses, trucks, and boats. This manual provides essential information for the safe and efficient operation of your heater.

Figure 1: FDIK Panda-U7 Diesel Parking Heater
2. Safety Information
- Exhaust Gas Warning: Exhaust gas contains poisonous components. The exhaust port MUST be mounted outdoors to ensure proper ventilation and prevent carbon monoxide poisoning.
- Ensure adequate ventilation when operating the heater, especially in enclosed spaces.
- Keep flammable materials at a safe distance from the heater and its exhaust system.
- Regularly inspect fuel lines and electrical connections for damage or leaks.
- Do not operate the heater if any part is damaged or malfunctioning.
- Ensure the heater is placed on a stable, non-flammable surface.
- The heater is equipped with overheating protection. Do not tamper with safety features.

Figure 2: Safety Protection Features and Power Options
3. Package Contents
The FDIK Panda-U7 Diesel Parking Heater package typically includes the following items:
- FDIK Panda-U7 Heater Unit
- LCD Controller (x1)
- Remote Controller (x1)
- 12V Power Cord (x1)
- Adapter for Indoor Heating (x1)
- Silencer (x1)
- Tubing (x1)
- Hot Air Duct (x1)
- Buckle (x4)
- Wind Head (x1)

Figure 3: Included Accessories and Dimensions
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FDIK |
| Model Name | Panda-U7 |
| Power Output | 8KW |
| Voltage Options | 12V, 24V, 220V (model dependent) |
| Item Type | Heating & Fans |
| Special Features | Air heating, Low Noise Pump, Universal Voltage, Overheating Protection, Temperature Mode, Bluetooth, Time Setting, Power Protection |
| Fuel Type | Diesel |
| Switch Type | LCD Switch |
| Item Weight | 10kg (approx. package weight) |
| Item Diameter | 7.5cm (likely exhaust pipe) |
| Material | Steel + Aluminum (ADC12 integrated chassis), PA6+G30 eco-friendly side baffle |
| Noise Level | < 55 decibels |
| Certifications | CE |
| Package Dimensions | Length: 45cm, Width: 45cm, Height: 25cm |

Figure 4: Internal Components and Materials
5. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your FDIK Panda-U7 heater. Refer to the diagrams for visual guidance.
5.1 Exhaust System Installation
- The exhaust port must always be mounted outdoors to safely vent poisonous exhaust gases.
- Mount the silencer horizontally according to the diagram, ensuring the small drainage hole faces downwards.
5.2 Air Intake and Hot Air Duct
- Connect the air intake pipe to the designated port on the heater.
- Attach the hot air duct to the heater's air outlet using the provided buckles. Direct the hot air duct to the area requiring heat.
5.3 Fuel Connection
- Connect the fuel line from the heater to a suitable diesel fuel source. Ensure all connections are secure and leak-free.
5.4 Electrical Connection
- For 12V/24V models, connect the provided 12V power cord to a compatible power source (e.g., vehicle battery).
- For indoor use or 220V models, use the provided adapter for indoor heating to connect to a standard power outlet.
- Ensure the power source matches the heater's voltage requirements.

Figure 5: Installation Example with Exhaust System
6. Operating Instructions
The FDIK Panda-U7 heater features an LCD controller and a remote controller for convenient operation.
6.1 Power On/Off
- Press the power button on the LCD controller or remote to turn the heater on or off.
6.2 Temperature Setting
- Use the up/down arrows on the controller to adjust the desired temperature. The LCD display will show the current and set temperatures.
6.3 Timer Function
- Access the time setting menu via the LCD controller to program specific operating times for the heater.
6.4 Fan Speed Adjustment
- Adjust the fan speed as needed for optimal heat distribution and comfort.
6.5 Monitoring
- The LCD display provides real-time information on temperature, time, battery status, and fan speed.

Figure 6: LCD Controller Features and Fuel Efficiency Graph
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your heater.
- Cleaning: Periodically clean the exterior of the heater. Ensure air intake and exhaust vents are free from obstructions.
- Fuel System: Check the fuel filter and fuel lines for any blockages or leaks. Replace the fuel filter as needed.
- Exhaust System: Inspect the exhaust pipe and silencer for any damage or blockages. Ensure the silencer's drainage hole is clear.
- Electrical Connections: Verify that all electrical connections are secure and free from corrosion.

Figure 7: Low Noise Operation and Design
8. Troubleshooting
If you encounter issues with your FDIK Panda-U7 heater, refer to the following troubleshooting guide:
| Fault Code | Cause | Workaround |
|---|---|---|
| E-2 | Supply voltage range error | Check battery/generator (Normal range: 24V (18-32V), 12V (9-16V)). Check fuse. |
| E-3 | Glow plug failure | Check ignition plug connector for looseness/short-circuit. Check if glow plug is damaged. |
| E-4 | Oil pump failure | Check oil pump connecting wires/connectors for damage, looseness, oxidation, short-circuit, or open-circuit. |
| E-5 | High temperature alarm (intake air>50°C; housing>230°C) | Check if heating air duct is unobstructed. Check if fan is operating normally. Check if temperature sensor is normal. |
| E-6 | Fan failure | Check if impeller is stuck. Check if connection plug is loose. Check gap between magnet on wind wheel and Hall sensor. Check for circuit short-circuit/open-circuit or motor leakage. |
| E-7 | Connection failed | Check detection harness. |
| E-8 | Lack of oil | Check for oil shortage, oil solidification at low temperature, oil line blockage, or stuck oil pump. Check if oxygen inlet/exhaust pipes are unobstructed. Check if shell temperature sensor is in full contact with shell and pressure spring is firm. |
| E-9 | Sensor failure | Check temperature sensor connection line/connector for damage/looseness. Check if sensor is damaged. |
| E-10 | Startup failure | Casing temperature too high (not cooling after 3 min). White smoke from exhaust. Little/no smoke from exhaust. Check ignition plug damage. Check gap between inner wind wheels. |
9. User Tips
- Power Supply: The heater comes with both a 12V power cord and an adapter for indoor heating, offering flexibility for various power sources.
- Heating Capacity: With an 8KW power output, this heater is capable of warming medium to large spaces, making it suitable for truck cabins, small workshops, larger camping tents, or boat interiors.
- Voltage Compatibility: Ensure you select the correct voltage model (12V, 24V, or 220V) for your specific application. The product is available in these configurations.
- Noise Reduction: The FDIK U-series is designed for low noise operation, featuring a silent oil pump, a heavy heater body to reduce combustion noise, a dynamically balanced fan, and a high-quality muffler.

Figure 8: Fuel-Efficient Design with Silent Oil Pump
10. Warranty and Support
For detailed warranty information and customer support, please refer to the official channels:
- Official Website: www.fdik.shop
- Online Store: fdik.aliexpress.com
- Email Support: fdikshop@163.com
- User Manual (PDF): A comprehensive user manual in PDF format is available for download. Please visit the official website or refer to the link provided by the seller: User Manual PDF