SEMBO BLOCK 716101 (Glowing Bee) and 716100 (Mechanical Jellyfish)

Contents

SEMBO BLOCK Mecha Series Building Blocks Instruction Manual

Models: Glowing Bee (716101) & Mechanical Jellyfish (716100)

1. Introduction

This manual provides detailed instructions for assembling, operating, and maintaining your SEMBO BLOCK Mecha Series building block models. Please read all instructions carefully before beginning assembly.

SEMBO BLOCK Mecha Series Glowing Bee and Jellyfish models
The SEMBO BLOCK Mecha Series Glowing Bee and Mechanical Jellyfish models.

2. Safety Instructions

  • Inspection: Inspect the product thoroughly before each use. Do not use if any parts are damaged.
  • Assembly: Assemble the models strictly according to the provided instructions and under adult supervision, especially for younger users.
  • Intended Use: Use the product only as intended. Avoid any misuse that could lead to damage or injury.
  • Small Parts Warning: This product contains small parts. It is not suitable for children under 3 years old due to choking hazards.
  • Chemical Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • Fire Hazard: Keep away from fire and high heat sources.

3. Assembly Instructions

Detailed step-by-step assembly instructions are provided in the included paper manual. Please refer to the manual for a complete guide.

A digital version of the user manual (PDF) can be referenced here.

3.1. Glowing Bee (Model 716101)

Assembly steps for the Glowing Bee model
Example assembly steps for the Glowing Bee model.

3.2. Mechanical Jellyfish (Model 716100)

Assembly steps for the Mechanical Jellyfish model
Example assembly steps for the Mechanical Jellyfish model.

4. Operating Instructions

4.1. Glowing Bee (Model 716101)

  • Movable Joints: The Mechanical Bee features movable joints, allowing for dynamic posing and display. Adjust the wings, legs, and other articulated parts as desired.
  • Light Feature: To activate the glowing effect, gently tap the designated area on the model.
Mechanical Bee model with movable joints highlighted
The Mechanical Bee features movable joints for posing.
Glowing Bee with 'Tap to turn on the lights' feature
Tap to turn on the lights of the Glowing Bee model.

4.2. Mechanical Jellyfish (Model 716100)

  • Adjustable Tentacles: The Mechanical Jellyfish features adjustable joint tentacles, allowing for various poses and a realistic appearance.
  • Light Feature & Charging: To activate the glowing effect, gently tap the designated area on the model. The light feature is powered by a Type-C charging battery. Ensure the battery is charged for optimal performance.
Mechanical Jellyfish model
The Mechanical Jellyfish model.
Mechanical Jellyfish showing adjustable joint tentacles
The Mechanical Jellyfish features adjustable joint tentacles.
Mechanical Jellyfish with 'Tap to turn on the lights. Type-C charging battery' feature
Tap to turn on the lights. The Jellyfish model uses a Type-C charging battery.

5. Care & Maintenance

  • Cleaning: Clean the surface of the models with a soft, dry cloth. Plastic parts can be wiped with a mild detergent solution, then dried thoroughly.
  • Inspection: Regularly check the models for any signs of wear or damage. If any parts are broken, discontinue use to prevent further damage or injury.

6. Storage Conditions

To maintain the quality and longevity of your building blocks, store them in a cool, dry place. Keep them away from direct sunlight, excessive heat, moisture, and open flames. Ensure building blocks are stored properly to prevent loss or deformation of individual pieces.

7. Specifications

FeatureDetail
Brand NameSEMBO BLOCK
MaterialEco-friendly ABS Plastic
Plastic Block ShapeSelf-Locking Bricks (Small building block compatible with Lego)
Recommended Age6+ years old (also suitable for 3-6Y, 6-12Y, 14+y)
CertificationCE
Is ElectricNo (main function); Jellyfish model includes a Type-C charging battery for LED lights.
High-concerned chemicalNone (except for California Proposition 65 warning for phthalates)
WarningDo not eat, Keep away from fire
OriginMainland China
Package Weight0.871 kg
Package Dimensions33cm (L) x 28cm (W) x 12cm (H)
Glowing Bee (716101) Part Count637 pieces
Glowing Bee (716101) Assembled Dimensions22.5cm (H) x 14.2cm (D) x 22.4cm (W)
Mechanical Jellyfish (716100) Part Count726 pieces
Mechanical Jellyfish (716100) Assembled Dimensions28.5cm (H) x 14.7cm (D) x 14.4cm (W)
Assembled dimensions for both Glowing Bee and Mechanical Jellyfish models
Assembled dimensions for both models.

8. Troubleshooting

No specific troubleshooting steps are provided for these models. If you encounter issues during assembly or operation, please:

  • Double-check the assembly steps in the instruction manual.
  • Ensure all connections are secure and parts are correctly oriented.
  • For light features, ensure batteries are correctly installed and charged (for Jellyfish model).

9. Warranty & Support

The manufacturer offers free replacement parts for this product. If you find any missing or defective pieces, please contact the seller or manufacturer for assistance.

Please retain this instruction manual for future reference regarding product information and support.

10. User Tips

  • Part Verification: Upon receiving your building block set, carefully check for all parts against the inventory list in the manual. Some users have reported missing pieces in other sets, so thorough verification upon arrival is recommended.
  • Assembly Patience: Building block models can be intricate. Take your time with each step and ensure pieces are firmly connected to avoid instability.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.