1. Product Introduction
Thank you for purchasing the FDIK Pure Sine Wave Inverter. This inverter features an advanced circuit design, high-quality electronic components, and outputs pure sine wave AC power, ensuring compatibility with a wide range of electrical appliances without harm.
The primary function of this inverter is to convert DC voltage from a battery into stable AC voltage for powering your devices.

2. Function Instructions
The inverter features a front panel with an AC output socket, a multi-function LCD display, and an ON/OFF switch. The back panel includes positive and negative electrode terminals for battery connection, along with cooling fans.

Front Panel Features:
- AC Output Socket: For connecting AC-powered appliances.
- Multi-function LCD Display: Shows real-time working status including input voltage (DC), output voltage (AC), frequency (Hz), battery level, and power output (W).
- ON/OFF Switch: To power the inverter on or off.
Back Panel Features:
- Positive Electrode (Red): Connects to the positive terminal of the battery.
- Negative Electrode (Black): Connects to the negative terminal of the battery.
- Cooling Fans: Provide powerful heat dissipation to ensure smooth and efficient operation.

3. Setup Instructions
3.1 Choosing the Right Battery
Selecting a suitable battery is crucial for optimal performance. If the battery capacity is too small, the inverter's maximum output power may be limited by the battery's capabilities.
Calculating Battery Output Power:
If you already have a battery, you can estimate its maximum output power using the formula:
Battery maximum output power = U (Battery voltage) * I (Battery capacity) * 0.72
Calculating Required Battery Capacity:
If you need to determine the battery capacity required for the inverter to output maximum power, use the formula:
Battery capacity = Inverter maximum output power / U (Battery voltage) / 0.72
For example, for a 12V battery to support a 2200W inverter at full load, you would typically need a 254AH battery. For a 24V battery, a 127AH battery would be required.

Maximum Output Power of Common Capacity Batteries:
| Battery Capacity | 12V Max Output Power | Battery Capacity | 24V Max Output Power |
|---|---|---|---|
| 70AH | 604W | 70AH | 1209.6W |
| 100AH | 864W | 100AH | 1728W |
| 150AH | 1296W | 150AH | 2592W |
The inverter is compatible with various battery types including LI (Lithium), SLD (Sealed Lead-Acid), GEL, FLD (Flooded Lead-Acid), and AGM (Absorbent Glass Mat).

3.2 Installation Environment
To ensure safety and optimal performance, install the inverter in the following locations:
- Dry: Install in a dry environment, away from water and humidity.
- Cool: Recommended ambient temperature for use is -15°C to 30°C.
- Good Ventilation: Leave at least 5 cm of clearance above and around the device for normal heat dissipation.
- Safety: Do not install in environments with flammable gases or liquids.
- Clean: Do not install in environments full of dust and dirt.
3.3 Connecting the Inverter
Important: The inverter has two models: 12V and 24V. Different input voltages are not universal. Please ensure the output voltage of your battery matches the input voltage of the inverter you purchased. Incorrect voltage will prevent proper operation or damage the inverter.

- Connect Battery Cables: Connect the red terminal of the inverter to the positive pole of the battery and the black terminal to the negative pole of the battery.
- Do NOT Reverse Connection: Reversing the connection will damage the inverter.
- Use Proper Wires: A large current passes through the connecting wire between the inverter and the battery. Please use the wires provided with the inverter. Do not use non-original wires, and ensure they are of sufficient gauge (e.g., minimum 25mm² for high current applications).
- Initial Connection Tip: For the very first connection, it is recommended to connect through a light bulb to allow capacitors to charge safely before direct connection.
4. Operating Instructions
- Power On: After connecting the inverter to the battery, press the ON/OFF switch to power on the inverter. The multi-function LCD display will light up, showing the current status.
- Monitor Display: The LCD display provides real-time information:
- DC Voltage: Input voltage from the battery.
- AC Voltage: Output AC voltage.
- Power (W): Current power consumption of connected appliances.
- Frequency (Hz): Output frequency.
- Battery Level: Indicates the remaining battery charge.
- Connect Appliances: Plug your AC-powered appliances into the AC output socket on the front panel.
- One-Click Start: The inverter is designed for easy one-click operation.
The inverter produces a pure sine wave output, which is identical to mains power, ensuring no harm to sensitive electrical appliances.

5. Maintenance
- Keep Clean: Regularly clean the inverter's exterior and ensure the cooling fans are free from dust and obstructions to maintain optimal heat dissipation.
- Check Connections: Periodically inspect all electrical connections to ensure they are secure and free from corrosion.
- Storage: If storing the inverter for an extended period, ensure it is in a dry, cool, and clean environment.
6. Troubleshooting
Common Issues and Solutions:
- No Power Output:
- Check if the inverter is switched ON.
- Verify battery connections (positive to positive, negative to negative).
- Ensure the battery voltage matches the inverter's input voltage (e.g., 12V battery for 12V inverter).
- Check battery charge level; a low battery voltage (e.g., below 10.8V for 12V systems) will trigger a warning or shutdown.
- Overheating:
- Ensure adequate ventilation around the inverter (at least 5 cm clearance).
- Reduce the load on the inverter if it's operating at or near its continuous power limit for extended periods.
- Clean any dust or debris from the cooling fans.
- Inverter Damage:
- Damage can occur from incorrect battery voltage input or reverse polarity connection. Always double-check connections before powering on.
- Avoid operating the inverter in confined spaces where hydrogen gas from batteries could accumulate, posing an explosion hazard.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FDIK |
| Model | A10 |
| Input Voltage | 12V or 24V DC (model dependent) |
| Output Voltage | AC 220V±10% |
| Output Frequency | 50Hz |
| Peak Power | 5000W |
| Continuous Power | 2200W |
| Conversion Efficiency | 93%+ |
| Socket Type | Europe |
| Dimensions (L x W x H) | 300mm x 170mm x 85mm |
| Certifications | CE, RoHS |
| High-concerned chemical | None |
| Origin | Mainland China |


8. Warranty and Support
For detailed information regarding warranty, returns, and technical support, please refer to the official user manual PDF or contact the seller directly.
A user manual in PDF format is available for download: View User Manual (PDF)
9. User Tips
- When connecting the inverter for the first time, it is advisable to connect it through a light bulb initially. This helps safely charge the internal capacitors.
- While the inverter is rated for 5000W peak power, its continuous operating power is approximately 1500W to 2200W. Plan your appliance usage accordingly.
- Ensure that the battery cables used are of adequate thickness (e.g., minimum 25mm² for currents of 150-200A) to prevent overheating and power loss. Consider installing a protective fuse (not exceeding 200A) near the battery.
- The cooling fans may become audible under heavy load, which is normal for effective heat dissipation.
- This inverter has been successfully used to power various household and construction appliances, including air fryers, coffee machines (1100W), hair dryers (2000W), angle grinders (2000W), vacuum cleaners, and drills.
- The inverter provides a low voltage warning (e.g., at 10.8V for 12V systems) to protect your battery from over-discharge.
- Idle power consumption (without any load) is approximately 12W.
10. Frequently Asked Questions (FAQ)
- Q: Can I use this inverter with a 1500W coffee machine in my camper?
- A: Yes, based on user feedback, the inverter can handle appliances up to 2000W, so a 1500W coffee machine should work. Ensure your battery system can provide the necessary current.
- Q: Is the 5000W rating peak or continuous power?
- A: The 5000W rating refers to the peak power. The continuous operating power is typically around 2200W, though some users report real continuous power closer to 1000-2000W.
- Q: What should I do if the inverter stops working after a few months?
- A: First, check all connections and ensure the battery is adequately charged. If the issue persists, refer to the troubleshooting section in the user manual. For repair or warranty claims, contact the seller directly as specific warranty terms may vary.
- Q: How much real power can this inverter output?
- A: While advertised as 5000W peak, practical continuous output is generally observed to be between 1000W and 2200W, depending on the load and battery setup.
11. Applications
The FDIK Pure Sine Wave Inverter is versatile and suitable for various applications, providing reliable AC power wherever you need it.

- Camping: Power lights, small appliances, and charging devices in outdoor settings.
- RV/Caravan: Run essential electronics and kitchen appliances on the go.
- Home/Emergency Backup: Provide temporary power for critical devices during outages or in off-grid setups.