Introduction
This manual provides detailed instructions for the IPEGA Wireless Game Gun, Model PG-SW2257. Designed for an immersive gaming experience, this controller is compatible with Nintendo Switch and Switch 2 consoles. It features advanced functionalities such as Hall Effect 3D joysticks, gyroscope motion control, rapid-fire capabilities, vibration feedback, and customizable RGB lighting.

Product Features
- Compatibility: Designed for use with Nintendo Switch and Switch 2 consoles for gaming operations.
- Gyroscope: Built-in gyroscope enables motion-sensing control for in-game perspective adjustment.
- Rapid-Fire: Features rapid-fire settings for quick shooting actions.
- Realistic Reloading: A unique slide-to-eject mechanism simulates reloading in shooting games, performed by mapping the function to the designated M-key.
- Precision Joysticks: Hall Effect 3D joysticks ensure precise control and eliminate drift.
- RGB Lighting: Left and right 3D RGB lighting enhances the gaming atmosphere.
- Ergonomic Design: Ergonomically designed for comfortable handling during extended gaming sessions.
- Vibration Feedback: Includes motor vibration feedback for an immersive and realistic gaming experience.
Package Contents
Please check the package for the following items:
- IPEGA Wireless Game Gun (PG-SW2257) x 1
- User Manual x 1
- Type-C Power Cable x 1

Product Diagram
Familiarize yourself with the layout and functions of the controller's buttons and features:

- + Button: Plus button.
- - Button: Minus button.
- T/M Button: TURBO and Macro programming key.
- Right 3D & Downward R3: Right analog stick, press down for R3.
- Left 3D & Downward L3: Left analog stick, press down for L3.
- Slide Mechanism: Used to simulate reloading in shooting games.
- M Button: Macro key (default mapped to X button).
- D-pad: Directional pad.
- ABXY Buttons: Action buttons.
- Gyro Switch: Toggle for gyroscope motion control.
- Indicators: LEDs for battery level and mode.
- HOME Button: System home button.
- ZL Button: Left trigger button.
- Light Switch: Button to control RGB lighting effects.
- Reset Pinhole: For resetting the device.
- USB Interface: Type-C port for charging.
- L Button: Left shoulder button.
- ZR Key: Right trigger button.
- R Button: Right shoulder button.
Setup: N·S Wireless Connection
- Initial Pairing:
- Turn on your Nintendo Switch console.
- From the main menu, navigate to Controllers → Change Grip/Order using touch selection.
- On the IPEGA Game Gun, press and hold the HOME button for 3 seconds to power on and enter pairing mode.
- LED2-LED3 on the controller will flash rapidly.
- Once a single LED remains solid, the controller is successfully paired with the console. Press the A button to proceed.
- Reconnection:
- If the controller has been previously paired with the NS console and is powered off while the console remains on, briefly press the HOME button.
- LED2-LED3 will blink slowly, and a randomly assigned LED will remain solid once reconnection is successful.
Operating Instructions
Controller Charging / Sleep / Wake / Power Off Functions
- Charging During Use: The mode indicator LED will pulse during charging and remain solid once fully charged.
- Charging While Powered Off: LEDs 1-4 will pulse during charging, and all four LEDs will remain solid when fully charged.
- Automatic Sleep: The controller will automatically enter sleep mode and power off after 15 minutes of inactivity.
- Wake Up: Press the HOME button to wake the controller and reconnect.
- Power Off: While powered on, press and hold the HOME button for 5 seconds to turn off the controller; all LED indicators will turn off.
- Note: When the NS2 console is in sleep mode, it cannot be awakened by pressing any controller buttons.
TURBO (Rapid Fire) Function
Before configuring TURBO/MACRO functions, ensure the motion control switch is disabled. Re-enable it after setup if needed.
- Supported Buttons: L, ZL, R, ZR, A, B, X, Y.
- Operation:
- Assign Rapid Fire: Hold the target button and press TURBO once.
- Activate Auto-Rapid Fire: Hold the same button and press TURBO twice.
- Cancel Rapid Fire: Hold the button and press TURBO three times.
- Indicator: When a configured rapid-fire button is pressed, the corresponding mode indicator will blink.
MACRO Function
- Recording:
- Hold T/M + M-programming key (pull the left slider fully downward) until all four LEDs blink. Release.
- Press the button(s) you want to program.
- Press the M-programming key again (pull left slider fully downward). The LEDs will stop blinking, indicating recording is complete.
- Clearing:
- Hold T/M + M-programming key until LEDs blink.
- Press the M-programming key again to stop blinking. The macro is cleared.
- Note: The M-key is default mapped to the X button.
Gyroscope On/Off and Sensitivity
- Toggle Switch: Use the dedicated switch to forcibly enable motion control. This function defaults to the right 3D joystick (with joystick priority during use).
- Native Games: Turning off the gyro switch does not affect native NS motion-supported games.
- Temporary Disable: When the motion control switch is on, full gyro simulation for the right joystick is activated. Press the T/M key once to temporarily disable motion control. It will automatically re-enable when the L2 trigger is pressed, enhancing precision aiming during scoped gameplay.
- 5-Level Gyro Sensitivity Adjustment:
- Press "−" + "UP" to increase sensitivity.
- Press "−" + "DOWN" to decrease sensitivity.
- The default setting is the highest level.
Motor Vibration Function Settings
- Connection Success: The controller vibrates for 0.5 seconds upon successful connection.
- Default Intensity: Weak (default setting).
- Adjustment Method:
- Press TURBO + Push Left 3D Stick Up to increase vibration intensity.
- Press TURBO + Push Left 3D Stick Down to decrease vibration intensity.
- Intensity Levels: Three levels are available: Off / Weak / Strong.
- Feedback During Adjustment: The motor vibrates for 1 second when adjusting intensity to preview the selected level.
RGB Lighting Control
- Default Behavior: Lights are on by default when powered on and automatically turn off after 5 minutes of inactivity.
- Manual Control: Press the lighting toggle button (located at the bottom of the controller) to manually turn the RGB lights on or off.
Specifications
| Parameter | Value |
|---|---|
| Operating Current (RGB off) | Approx. 20mA |
| Operating Current (RGB on) | Approx. 80mA |
| Standby Current | <15μA |
| Charging Current | Approx. 260mA |
| Charging Time | 3 hours |
| Battery Life | 15 hours |
| Battery Capacity | 500mAh/3.7V |
| Interface Type | Bluetooth, Type-C (for charging) |
| Joystick Sensor Module | Hall Effect |
| Trigger Button Type | Hall-Linear |
| Certification | CE |
Care and Maintenance
- Do not store the product in damp or high-temperature environments.
- Avoid striking, dropping, piercing, or attempting to disassemble the product to prevent unnecessary damage.
- Unauthorized disassembly by non-professionals will void the warranty.
- Gyroscope Calibration: To calibrate the gyroscope, place the product on a flat surface while it is powered off. Press and hold the "+" and "HOME" buttons simultaneously for 3 seconds.
Troubleshooting
- Connectivity Issues: If you experience issues with connectivity or operation with certain games, please note that the company shall not be held liable for failures resulting from force majeure factors such as official platform software updates or source code modifications. The company reserves the right of final interpretation regarding such matters.
- Resetting the Controller: If the controller becomes unresponsive, locate the Reset Pinhole (refer to Product Diagram) and use a thin object (like a paperclip) to press the reset button inside.
User Tips
- Steam Deck Compatibility: Users have reported successful connection and operation with Steam Deck via Bluetooth.
- Gyro with X-input: The dedicated gyro switch allows the motion control to function even with X-input, as it operates directly from the device.
- Vibration Intensity: While adjustable, some users find the maximum vibration intensity to be weak. Manage expectations regarding strong haptic feedback.
- Battery Life: With a 500mAh battery, expect approximately 15 hours of gameplay. Consider charging between longer sessions.
- Button Feel: Some users note that the trigger buttons, being switch-type, might feel different compared to membrane-type buttons.
Frequently Asked Questions (FAQ)
- Q: Will it work for PC emulators?
- A: Yes, the controller is likely compatible with PC emulators via Bluetooth connection.
- Q: Is it compatible with Android systems?
- A: Yes, it is expected to be compatible with Android systems via Bluetooth connection.
Warranty and Support
Unauthorized disassembly or modification of this product by non-professionals will void the warranty.
For further assistance or to view the official user manual in PDF format, please refer to the following link: User Manual (PDF).
The company reserves the right of final interpretation regarding product functionality and warranty terms, especially concerning issues arising from external software updates or modifications.