Philips DiamondClean Series 1 Electric Toothbrush HX5070

Introduction

Welcome to the Philips DiamondClean Series 1 Electric Toothbrush HX5070 user manual. This guide provides essential information for the safe and effective use of your new electric toothbrush, designed to deliver superior cleaning performance and promote optimal oral hygiene. Please read this manual thoroughly before first use and retain it for future reference.

Safety Information

• Always read all instructions before initial use.
• Keep the USB inductive charging base away from water and moisture. Do not place it near or drop it into water.
• Do not modify or attempt to repair the appliance. This product contains no user-serviceable parts.
• If the appliance or charging base appears damaged, discontinue use immediately and contact customer support.
• This appliance is designed for cleaning teeth, gums, and tongue only. Do not use it for any other purpose.
• Consult your dentist before using this product if you have had oral or gum surgery in the previous two months, or if you experience excessive bleeding from the gums after use or have bleeding that continues for more than one week.

Package Contents

Your Philips DiamondClean Series 1 Electric Toothbrush HX5070 package includes:

• 1 x Electric Toothbrush Handle
• 1 x Brush Head (Compatible with C2 Clean brush heads)
• 1 x USB Inductive Charging Base

Specifications

Setup

1. Charging the Toothbrush

1. Place the electric toothbrush handle onto the USB inductive charging base.
2. Connect the USB cable to a compatible USB power adapter (not included) and plug it into a power outlet.
3. The battery indicator light on the handle will illuminate to show that it is charging. A full charge can provide up to 40 days of use (based on 2x daily, 2-minute usage).
4. The inductive charging system ensures safety by eliminating exposed metal parts.

2. Attaching the Brush Head

• Align the brush head with the handle so the bristles face the same direction as the front of the handle.
• Push the brush head down firmly onto the metal shaft until it clicks into place.

Operating Instructions

1. Power On/Off and Mode Selection

1. Press the power button once to turn on the toothbrush. It will start in the last used cleaning mode.
2. To change the cleaning mode, press the power button repeatedly while the toothbrush is on. The indicator light next to the mode name will illuminate. The available modes are: Clean, Deep Clean, and Sensitive.
3. To turn off the toothbrush, press and hold the power button for a few seconds, or cycle through all modes until it turns off.

2. Brushing Technique

• Wet the brush head and apply a small amount of toothpaste.
• Place the brush head against your teeth at a slight angle towards the gum line.
• Turn on the toothbrush. Gently move the brush head slowly across each tooth, allowing the sonic vibrations to do the cleaning. Do not scrub.
• The 45° Bass Technique Grip Handle is designed to scientifically guide you to the optimal brushing angle.

3. Smart Features

• 2-Minute Timer & 30-Second QuadPacer: The toothbrush will automatically turn off after 2 minutes of brushing. The QuadPacer feature signals every 30 seconds to prompt you to move to the next quadrant of your mouth, ensuring a thorough and even clean.
• Pressure Sensor: If you apply too much pressure, the toothbrush will instantly reduce vibrations within 0.08 seconds to protect your gums and enamel. This real-time pressure control helps prevent over-brushing.
• 3-Second Soft Start: This feature prevents toothpaste splatter by gradually increasing the vibration intensity over 3 seconds when you first turn on the brush.
• 14-Stage Power Ramp-Up Technology: For first-time users, the toothbrush gradually increases its power output over the first 14 uses (approximately 7 days) to help you comfortably adapt to electric brushing.

Maintenance

1. Cleaning the Toothbrush

• After each use, rinse the brush head thoroughly under running water while the toothbrush is still on to remove any remaining toothpaste and debris.
• Turn off the toothbrush and remove the brush head. Rinse the handle and the metal shaft under running water.
• Wipe the handle with a damp cloth. Do not immerse the handle or charging base in water.

2. Brush Head Replacement

• For optimal cleaning performance and hygiene, replace your brush head every 3 months, or sooner if the bristles become frayed or worn.
• Compatible replacement brush heads are Philips C2 Clean brush heads.

Troubleshooting

• Toothbrush not turning on: Ensure the toothbrush is fully charged. Place it on the charging base for several hours.
• Weak vibration or reduced cleaning power: The battery may be low and requires charging. Alternatively, the brush head might be worn out and needs replacement.
• Toothpaste splatter: Ensure you are using the 3-second soft start feature. Apply toothpaste before turning on the brush and place it in your mouth before activating.
• Pressure sensor activating too often: You may be applying too much pressure. Guide the brush gently and let the sonic vibrations do the work.

User Tips

• For optimal results, use a pea-sized amount of toothpaste.
• Angle the brush at 45 degrees towards the gum line to effectively clean both tooth surfaces and gum line.
• Allow the brush to do the work; simply guide it gently across each tooth surface without scrubbing.
• Take advantage of the QuadPacer by dividing your mouth into four sections and spending 30 seconds on each for a balanced clean.
• If you're new to electric toothbrushes, the 14-stage power ramp-up feature will help you gradually adjust to the sonic vibrations over the first week of use.

Warranty and Support

This Philips product is covered by the manufacturer's warranty. For detailed warranty information, product registration, and customer support, please refer to the official Philips website or contact their customer service department in your region. Keep your proof of purchase for warranty claims.