MICTUNING P1s RGB 6 Gang Switch Panel

Contents

MICTUNING P1s RGB 6 Gang Switch Panel

User Manual

Brand: MICTUNING

Introduction

Thank you for purchasing the MICTUNING P1s RGB 6 Gang Switch Panel. This multifunction switch pod is designed to provide convenient control over multiple auxiliary lights and accessories in your 12V/24V vehicle. It features 3 silicone function buttons for comfortable operation, 4 upgraded control modes, and adjustable RGB backlight with 5 brightness levels. The system offers flexible installation options and comes with all necessary accessories for a neat and easy wiring setup.

This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and safety.

Packing List

Please verify that all items are included in your package:

Contents of the MICTUNING P1s RGB 6 Gang Switch Panel package
Figure 1: What's included in the package. (1) Control Box, (2) 6-Gang Switch Panel, (3) 4x Mounting Brackets, (4) Circuit Breaker, (5) Packing Box, (6) 2x Label Stickers, (7) Wires, (8) Fasteners, (9) Zip Ties, (10) Brand Sticker, (11) Adhesive Tape, (12) Manual.
  • 1x Control Box
  • 1x 6-Gang Switch Panel
  • 4x Mounting Brackets
  • 1x Circuit Breaker
  • 1x Packing Box (for shipping)
  • 2x Label Stickers (140pcs total)
  • Wires (Length 137")
  • Fasteners
  • Zip Ties
  • 1x Brand Sticker
  • 1x Adhesive Tape
  • 1x User Manual (this document)

Setup and Installation

Switch Panel Installation

The switch panel can be installed using two methods: adhesive mounting or fixed mounting with brackets.

Method 1: Adhesive Mounting (for 6-Gang Panel Only)

  1. Stick the adhesive pad onto the back of the switch panel.
  2. Peel off the other side's backing from the adhesive pad.
  3. Firmly stick the switch panel onto your desired clean, dry, and dust-free location.
Adhesive mounting steps for the switch panel
Figure 2: Adhesive mounting process for the 6-gang switch panel.

Method 2: Fix Mount (for 6-Gang Panel)

  1. Align the mounting bracket with the hole positions on the switch panel.
  2. Tighten the flat head screws to secure the bracket to the panel.
  3. Mount the assembled switch panel and bracket to your desired location using appropriate fasteners.
Fix mount installation steps for the switch panel
Figure 3: Fixed mounting process for the switch panel.

Method 3: Angle Adjustable Mount

For an angle-adjustable mount, use the provided brackets. Tighten the base plate screws and then tighten the bracket screws to achieve the desired angle and secure the switch panel.

Wiring Diagram

The control box can be wired to either the ACC (Accessory) power or directly to the battery. Ensure all connections are secure and properly insulated.

Wiring diagram for ACC or Battery connection
Figure 4: ACC or Battery Wiring Diagram. Connect the control box to either the car battery (Way 1) or an ACC power source (Way 2). Ensure proper fuse installation for each circuit.

Important: The control box MUST be connected to ACC to work properly. Connect the wires from both accessories to the same positive and negative outputs of the control box. Ensure that the accessories connected to a single circuit will not draw more power than the maximum for that control box circuit and its fuse.

Label Stickers Application

Customize your switch panel buttons with the provided 140pcs labeling stickers.

  1. Wipe clean the switch panel, ensuring it is dry and free of dust.
  2. Peel off the desired label and firmly stick it onto the panel button.
  3. Once labeling is completed, you can easily control your devices and lights.
Steps for applying label stickers to the switch panel
Figure 5: Process of customizing switch panel buttons with label stickers.

Operating Instructions

Button Functions

  • ON/OFF Switch: This button turns the panel on or off. It has a memory function, automatically remembering the last setting.
  • Brightness Adjustment Button:
    • Short Press: Adjusts the 6-level brightness (0%, 20%, 40%, 60%, 80%, 100%). Each press cycles through a different brightness level.
    • Long Press: Enters the control mode setting.
  • RGB Color Adjustment Button:
    • Short Press: Switches the backlight color (Red, Orange, Yellow, Green, Cyan, Blue, Purple, White).
    • Long Press for 2-3s: Switches the backlight effect (Gradient, Jumping, Breathing).
    • Long Press for 7+s: Resets the panel to factory settings.

Adjusting Brightness

The panel offers 6 levels of brightness adjustment (0%, 20%, 40%, 60%, 80%, 100%) to suit different lighting conditions. You can adjust the button brightness to a lower level for comfortable night vision, or increase it for clear visibility during the day.

Brightness adjustment examples for day and night driving
Figure 6: Examples of switch panel brightness settings for night and daytime use.

Control Mode Setting

The P1s RGB switch panel features 4 distinct control modes, each indicated by a different color, making operation clear and easy.

Diagram showing the 4 control modes: Toggle, Momentary, Strobe, Flash
Figure 7: The four control modes and their typical applications.
  • 1. Toggle (Red): Constant Light mode. Press once to turn on, press again to turn off.
  • 2. Momentary (Blue): Ignition power. Press and hold to turn on, release to turn off.
  • 3. Flash (Purple): Flashing at a slower speed, suitable for turn signals.
  • 4. Strobe (Green): Pulsed Strobe mode, ideal for emergency or warning lights.

How to Set Control Mode:

  1. Long press the Brightness Button until the Red Backlight starts flashing. This indicates you have entered Control Mode Setting.
  2. Press any button you wish to set. The indicator's color will switch each time you press it, representing the 4 control modes (Red for Toggle, Blue for Momentary, Purple for Flash, Green for Strobe). Set each button to your desired mode.
  3. Once all buttons are set, press the ON/OFF button to exit the setting mode.

Maintenance

To ensure the longevity and optimal performance of your MICTUNING P1s RGB 6 Gang Switch Panel, follow these maintenance guidelines:

  • Cleaning: Regularly wipe the switch panel surface with a soft, dry cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners that could damage the silicone buttons or display.
  • Fuse Replacement: If a circuit stops working, check the corresponding fuse in the control box. Always replace a blown fuse with a new one of the SAME or LOWER amperage as the original. For example, replace a 30A fuse with another 30A or less; never use a 10A fuse to replace a 5A fuse.
Fuse replacement instructions
Figure 8: Important note on fuse replacement: always use the same or lower amperage.

Troubleshooting

Q: Is it normal to hear a 'da-da-da' sound?
A: Yes, it's normal. The relay operates by controlling the circuit through the opening and closing of metal contacts.
Q: The 'da-da-da' sound is louder in flashing mode, is there any safety concern?
A: There are no safety concerns. You may hear a louder sound in flashing mode, but our circuit board includes protective chips, and we have conducted 30,000 hours of durability testing to ensure safety and reliability.
Q: When connecting to the battery, the power indicator is always on. Will it cause battery loss?
A: No. The standby current of this product is less than 3mA. A 60AH battery provides 833 days of standby power for the switch panel without charging it.
Q: How do I know if the wiring is correct?
A: If the power indicator is red, it means the connection is correct.
Q: Can I choose NOT to connect ACC power?
A: No, the control box MUST be connected to ACC to work properly.
Q: What is the type of Add-a-Circuit Fuse Tap?
A: Small fuse tap.

Specifications

Feature Specification
Model Name P1s RGB 6 Gang Switch Panel
Input Voltage 12V / 24V
Maximum Current 60A
Maximum Power (12V) 720W
Maximum Power (24V) 1440W
Operating Temperature -40°C to 105°C
Waterproof Rate IP65
Switch Type Toggle push button
Switch Panel Dimensions 3.9 in (W) x 2.7 in (H)
Control Box Dimensions 6.2 in (W) x 4.7 in (H)

6-Circuit Fuse Block Details:

Circuit Amperage
Circuit 1 5A
Circuit 2 10A
Circuit 3 10A
Circuit 4 20A
Circuit 5 20A
Circuit 6 30A

User Tips

  • For a cleaner installation, consider routing wires through existing grommets or drilling new holes with proper sealing to protect against water and debris.
  • When choosing a mounting location, ensure the switch panel is easily accessible and visible, but does not obstruct your view or interfere with vehicle controls.
  • Take advantage of the 140pcs labeling stickers to clearly identify each switch function, especially if you have many accessories.
  • Experiment with the different RGB backlight colors and effects to match your vehicle's interior ambiance or your personal preference.

Warranty and Support

MICTUNING stands behind its products. If you have any questions or require assistance, please feel free to contact us. We offer friendly response within 4 hours and lifetime customer support.

For a downloadable PDF version of the user manual, please refer to the official product page or contact support. The PDF manual can be found at: MICTUNING P1s RGB Switch Panel User Manual (PDF)

You can also scan the QR code below to send us an email for support or search for "MICTUNING P1s-R Install" on YouTube for installation videos.

QR code to send email for support
Email Support QR
QR code to watch installation video
Installation Video QR

© MICTUNING All Rights Reserved

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.