Mudiro M-5S Evo-H

Contents

Mudiro M-5S Evo-H 8KW Diesel Heater User Manual

Model: M-5S Evo-H

1. Introduction

Thank you for choosing the Mudiro M-5S Evo-H 8KW Diesel Heater. This all-in-one portable diesel air heater is designed to provide efficient and reliable heating for various environments, including camping, RVs, tents, cars, trucks, boats, cabins, and garages. It features advanced safety mechanisms, intelligent controls, and robust performance to ensure your comfort in cold conditions. Please read this manual thoroughly before operation to ensure safe and optimal use of your heater.

Mudiro M-5S Evo-H Diesel Heater with remote, adapter, and TFT display
The Mudiro M-5S Evo-H Diesel Heater and its main accessories.

2. Important Safety Warnings

  • Carbon Monoxide (CO) Hazard: This heater uses diesel fuel and produces exhaust gases containing carbon monoxide. Always ensure adequate ventilation when operating the heater. The Mudiro M-5S Evo-H is equipped with a built-in CO sensor that will trigger an alarm and automatically shut down the unit if unsafe CO levels are detected. Do not disable this safety feature.
  • Proper Ventilation: Never operate the heater in an enclosed space without proper exhaust ventilation. Ensure the exhaust pipe is routed safely outside and away from any flammable materials or living spaces.
  • Fuel Handling: Use only diesel fuel. Do not use gasoline or other volatile fuels. Refuel in a well-ventilated area and away from open flames or ignition sources. Ensure the leak-proof fuel cap is securely fastened after refueling.
  • Placement: Place the heater on a stable, non-flammable surface. Maintain a safe distance from walls, furniture, and other combustible materials. Do not block the air intake or outlet.
  • Electrical Connection: Ensure the power supply (12V, 24V, or 240V via adapter) matches the heater's requirements. Use only the provided adapter and cables. Do not operate with damaged cords or plugs.
  • Children and Pets: Keep children and pets away from the heater during operation. The heater's surfaces can become hot.
  • Maintenance: Regularly inspect the heater for any damage, blockages, or leaks. Perform routine maintenance as described in this manual.
Professional grade CO protection with alarm thresholds for dangerous, high danger, and lethal CO levels.
The heater's professional-grade CO protection system with auto-shutoff and customizable alarm thresholds.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged. If any items are missing or damaged, please contact customer support.

  • 1x Mudiro M-5S Evo-H Diesel Heater
  • 1x Remote Control
  • 1x TFT Switch (Control Panel)
  • 1x AC Adapter (for 240V operation)
  • 1x Intake Pipe
  • 1x Exhaust Pipe
  • 1x Air Outlet Pipe
  • 1x Muffler
  • 1x Air Filter
  • 1x Diesel Strainer
  • 1x TFT Switch Extension Cord
  • 1x Set of Installation Parts (Riser Bracket, clamps, screws, etc.)
  • 1x User Manual (this document)
  • 3x Direct Links (for multi-zone heating)
Visual packing list showing the diesel heater, LCD switch, adapter, remote control, user manual, intake and exhaust pipe, air outlet pipe, riser bracket, muffler, three direct links, diesel strainer, installation parts, and LCD switch extension cord.
Detailed view of all components included in the Mudiro M-5S Evo-H package.

4. Product Features

  • Advanced CO Protection: Built-in carbon monoxide sensor with auto shut-off and customizable alarm thresholds (e.g., Dangerous > 50 PPM, High Danger > 150 PPM, Lethal > 400 PPM).
  • Auto-Adaptive Altitude Intelligence: Automatically compensates for altitude up to 18,045 ft (5,500 m), adjusting the air-fuel ratio for optimal efficiency. Real-time altitude display on the TFT screen.
  • Multi-Voltage Support: Compatible with 12V, 24V DC power, and includes a 240V AC adapter for household outlets.
  • Ultra-Quiet Operation: Features an upgraded noise-reducing fuel pump, operating at 50-55dB, ensuring minimal disturbance.
  • Smart & Easy Control: Triple control system via TFT LCD panel, Bluetooth app (up to 98 ft), and pre-paired remote control (up to 98 ft).
  • High Efficiency Heating: 8KW power output, heating areas up to 289 ft² (27 m²) with fuel consumption of 0.12–0.36L per hour. Adjustable temperature range from 46.4°F–96.8°F (8°C–36°C).
  • Wireless Temperature Sensor: Provides ±2°F precision for auto start/stop temperature control.
  • Timer Function: Supports setting up to 3 groups of ON/OFF timers.
  • Durable Design: Features a retractable PVC handle for portability, a leak-proof fuel cap, grounded outlet, DC power terminals, and a sturdy POM base.
  • Complete Upgrade Set: Includes a diesel strainer for clean fuel flow and three direct links for multi-zone heating applications.
Comparison of Mudiro heater features (CO Protection, Altitude Mode, Temp Control, Sound) vs. ordinary heaters, highlighting Mudiro's advantages.
Key advantages of the Mudiro M-5S Evo-H over standard heaters.
Image highlighting 12V/24V/240V power, Bluetooth, Remote, and LCD control options for the heater.
Versatile power options and control methods.
Close-up images of the retractable handle, leak-proof fuel cap, grounded outlet, and DC power terminals.
Design details for portability, safety, and power connections.

5. Setup and Installation

5.1 Component Identification (TFT LCD Switch)

Detailed diagram of the Smart LCD Switch with numbered components: 1. Power Button, 2. Confirm Button, 3. Adjust Up Button, 4. Adjust Down Button, 5. Remote Control Pairing Status Indicator, 6. Bluetooth Connection Status Indicator, 7. Auto Start/Stop Function Indicator, 8. Voice Broadcast Indicator, 9. Power Supply Voltage Display, 10. Real-time Altitude Display, 11. CO Alarm Time and CO Level Display, 12. CO Alarm On/Off, 13. Language Indicator, 14. 10 Gear Temperature Setting, 15. Temperature Control Mode Display, 16. Case Temperature or Set Temperature Display, 17. Temperature Unit.
Smart LCD Switch: Key components and their functions.
  1. Power Button: Turns the heater ON/OFF.
  2. Confirm Button: Confirms selections or enters settings.
  3. Adjust Up Button: Increases values or navigates up.
  4. Adjust Down Button: Decreases values or navigates down.
  5. Remote Control Pairing Status Indicator: Shows if the remote is paired.
  6. Bluetooth Connection Status Indicator: Shows Bluetooth connectivity.
  7. Auto Start/Stop Function Indicator: Indicates automatic temperature control.
  8. Voice Broadcast Indicator: Shows if voice prompts are active.
  9. Power Supply Voltage Display: Displays current input voltage.
  10. Real-time Altitude Display: Shows current operating altitude.
  11. CO Alarm Time and CO Level Display: Displays CO detection status.
  12. CO Alarm On/Off: Toggles CO alarm function.
  13. Language Indicator: Shows selected language.
  14. 10 Gear Temperature Setting: Displays current heating gear.
  15. Temperature Control Mode Display: Shows current temperature mode.
  16. Case Temperature or Set Temperature Display: Displays current or target temperature.
  17. Temperature Unit: Indicates temperature unit (°C/°F).

5.2 Initial Setup Steps

  1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
  2. Placement: Position the heater on a flat, stable, and non-flammable surface. Ensure there is sufficient clearance around the heater for proper airflow and safety.
  3. Fueling: Unscrew the leak-proof fuel cap and fill the integrated 5L fuel tank with clean diesel fuel. Do not overfill. Securely fasten the cap.
  4. Exhaust System Installation:
    • Connect the intake pipe to the designated intake port on the heater.
    • Connect the exhaust pipe to the exhaust port. Ensure the muffler is installed in-line with the exhaust pipe to reduce noise.
    • Route the exhaust pipe safely outside the heated area, ensuring it is clear of any flammable materials, windows, or vents. The 90mm wide exhaust pipe is designed for efficient venting.
    • Attach the air filter to the intake pipe to prevent debris from entering the system.
  5. Air Outlet Pipe: Connect the air outlet pipe to the heater's hot air outlet. This pipe directs the heated air into your desired space. For multi-zone heating, use the provided three direct links.
  6. Power Connection:
    • For 12V/24V DC: Connect the DC power terminals to your vehicle's 12V or 24V battery system, ensuring correct polarity (red to positive, black to negative).
    • For 240V AC: Use the provided AC adapter. Plug the adapter into a standard 240V household outlet and connect its output to the heater's power input.
  7. TFT Switch Connection: Connect the TFT Switch to the heater using the provided TFT Switch Extension Cord. This allows for flexible placement of the control panel.
Image showing the 90mm wide exhaust pipe connected to the heater and an extension cable for the control panel.
Example of exhaust pipe routing and control panel extension cable usage.

6. Operation

6.1 Powering On/Off

  • To Power On: Press and hold the Power Button (1) on the TFT Switch until the display illuminates and the heater begins its startup sequence.
  • To Power Off: Press and hold the Power Button (1) again. The heater will enter a cool-down phase before completely shutting down. Do not disconnect power during the cool-down phase.

6.2 Setting Temperature

  • Once powered on, use the Adjust Up (3) and Adjust Down (4) buttons to set your desired temperature. The adjustable range is 46.4°F–96.8°F (8°C–36°C).
  • The heater features a wireless temperature sensor for precise control (±2°F precision). It will automatically start and stop to maintain the set temperature.
  • The TFT display (16) will show either the case temperature or the set temperature, depending on the mode.
Graph showing precise temperature control with minimal fluctuation (±2°F) compared to other heaters.
Illustration of the heater's high-precision temperature control.

6.3 Altitude Mode

The Mudiro M-5S Evo-H automatically detects and compensates for altitude changes up to 18,045 ft (5,500 m). The real-time altitude is displayed on the TFT screen (10). No manual adjustment is required for optimal performance at varying altitudes.

Image showing the heater in a snowy tent environment with the TFT display showing altitude mode and 5500m, indicating automatic altitude compensation.
Automatic altitude compensation ensures efficient heating at high elevations.

6.4 CO Protection Settings

The CO protection system is active by default. You can view the CO alarm time and level on the display (11) and toggle the alarm ON/OFF (12). Refer to the full user manual for detailed instructions on customizing alarm response times and thresholds (PPM).

6.5 Timer Function

The heater supports setting up to 3 groups of ON/OFF timers. Consult the detailed user manual for specific steps on programming these timers via the TFT Switch or Bluetooth app.

Image showing the heater operating quietly with a timer function displaying ON at 14:30 and OFF at 15:30.
The heater features whisper-quiet operation and a programmable timer function.

6.6 Remote and Bluetooth App Control

  • Remote Control: The included remote control is pre-paired. Use it to power on/off, adjust temperature, and access basic settings from up to 98 ft away. The Remote Control Pairing Status Indicator (5) on the TFT switch will confirm connection.
  • Bluetooth App Control: Download the official Mudiro app to your smartphone. Follow the app's instructions to connect via Bluetooth (up to 98 ft). The Bluetooth Connection Status Indicator (6) will confirm connection. The app provides comprehensive control and monitoring features.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your Mudiro diesel heater.

  • Fuel Filter/Strainer: Periodically check and clean the diesel strainer to ensure clean fuel flow. Replace if damaged.
  • Air Filter: Inspect the air filter regularly and clean or replace it as needed to maintain optimal combustion and prevent dust ingress.
  • Exhaust System: Ensure the exhaust pipe and muffler are free from blockages and damage. Clear any soot buildup.
  • General Cleaning: Keep the exterior of the heater clean. Use a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: When storing the heater for extended periods, ensure the fuel tank is empty and the unit is clean and dry. Store in a cool, dry place.

8. Troubleshooting

Problem Possible Cause Solution
Heater does not start No power, low fuel, clogged fuel filter, air in fuel line. Check power connection, refuel, clean/replace fuel filter, bleed air from fuel line (refer to full manual).
Low heat output Clogged air filter, incorrect temperature setting, exhaust blockage. Clean/replace air filter, adjust temperature, check exhaust for blockages.
Excessive smoke Poor fuel quality, incorrect air-fuel mixture, carbon buildup. Use clean diesel, ensure proper ventilation, perform maintenance to clear carbon buildup.
CO alarm triggers Insufficient ventilation, exhaust leak, high CO levels. Immediately ventilate the area, check exhaust system for leaks, move heater to a better-ventilated location.
Remote/App not connecting Out of range, battery low (remote), Bluetooth off (phone). Move closer to heater, replace remote batteries, enable Bluetooth on phone, re-pair if necessary.

For more detailed troubleshooting steps and error codes, please refer to the comprehensive user manual.

9. Specifications

Feature Detail
Brand MUDIRO
Model M-5S Evo-H
Power 8KW
Applicable Voltage 12V/24V (DC), 240V (AC with adapter)
Fuel Type Diesel
Fuel Tank Capacity 5L
Fuel Consumption 0.12-0.36 L/h
Applicable Area 215-289 ft² / 20-27 m²
Adjustable Temperature Range 46.4°F-96.8°F / 8°C-36°C
Operating Temperature Range -40°F-104°F / -40°C-40°C
Control Methods TFT Panel, Remote Control (98ft), Bluetooth App Control (98ft)
Altitude Adaptive Automatic adjustment up to 5500m / 18045 ft
CO Protection Auto Shut-off, Customizable Alarm Response Time & Threshold (PPM)
Temperature Precision ±2°F (Wireless Temperature Sensor)
Noise Level 50-55dB
Certifications CE, RoHS
Item Weight 11kg
Item Dimensions (L x W x H) 38cm x 25cm x 27cm

10. User Tips

  • Pre-heat for Optimal Performance: Allow the heater a few minutes to pre-heat after starting, especially in very cold conditions, to achieve stable heat output.
  • Monitor Fuel Level: Regularly check the fuel level indicator on the side of the unit to avoid running out of fuel during operation.
  • App Connectivity: If experiencing issues with the Bluetooth app, ensure your phone's Bluetooth is enabled and you are within the 98 ft range. Restarting the app or the heater can sometimes resolve minor connection issues.
  • Exhaust Pipe Extension: For applications like heating a tent from outside, ensure the exhaust pipe is extended sufficiently away from the tent and any flammable materials.

11. Warranty and Support

The Mudiro M-5S Evo-H Diesel Heater comes with a standard manufacturer's warranty. For warranty claims, technical support, or spare parts, please contact the seller or Mudiro customer service. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the official Mudiro website or contact their support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.