SoBuy KLS17-WN

Contents

SoBuy KLS17-WN Telescopic Wardrobe System

Instruction Manual

1. Product Overview

The SoBuy KLS17-WN is a versatile telescopic wardrobe system designed to provide flexible storage solutions for your clothing and accessories. It features adjustable height and width, multiple hanging rails, and shelves to maximize your storage space.

SoBuy KLS17-WN Telescopic Wardrobe System in a straight configuration

Image: SoBuy KLS17-WN Telescopic Wardrobe System in a straight configuration.

SoBuy KLS17-WN Telescopic Wardrobe System in a corner configuration

Image: SoBuy KLS17-WN Telescopic Wardrobe System in a corner configuration.

2. Safety Information

  • Ensure all connections are securely tightened before use.
  • Do not exceed the maximum load capacity of 45 kg.
  • Distribute weight evenly across rails and shelves to prevent tipping.
  • Keep small parts away from children during assembly.

3. Package Contents

Before assembly, verify that all parts are present. Refer to the detailed parts list in the official PDF user manual for visual identification.

Tools Required (Not Included):

  • Measuring Tape
  • Hex Key (M4, usually included with screws)

Parts List:

ItemDescriptionQuantity
1Bottom Pole Section3
2Middle Pole Section3
3Top Pole Section3
4Horizontal Rail4
5Shelf Support Rod4
6Shelf4
7Shelf Bracket4
ABase Cap3
BPole Connector (Upper)3
CPole Connector (Lower)3
DRail Clamp3
ETop Cap3
FAdjustable Foot3
GShelf Support Clamp4
HShelf Support End Cap4
JScrew (M6*12)28
KHex Key (M4)1

Note: This list is based on the provided assembly diagrams. For visual confirmation of each part, please refer to the official PDF user manual.

4. Setup and Assembly

Follow these steps carefully. For detailed illustrations, consult the official PDF user manual.

  1. Prepare the Poles (x3):
    • Attach the Base Cap (A) to the bottom of the Bottom Pole Section (1).
    • Connect the Bottom Pole Section (1) to the Middle Pole Section (2) using Pole Connector (C).
    • Connect the Middle Pole Section (2) to the Top Pole Section (3) using Pole Connector (B).
    • Insert the Top Cap (E) and Adjustable Foot (F) into the top of the Top Pole Section (3).
    • Repeat for all three vertical poles.
  2. Assemble Horizontal Rails (x4):
    • Attach Rail Clamps (D) to the ends of each Horizontal Rail (4).
    • Secure the Rail Clamps (D) with screws (J) using the Hex Key (K).
  3. Install Shelf Supports (x4):
    • Attach Shelf Support Clamps (G) to the ends of each Shelf Support Rod (5).
    • Secure the Shelf Support Clamps (G) with screws (J).
    • Attach Shelf Support End Caps (H) to the outer ends of the Shelf Support Rods (5).
  4. Position and Secure Vertical Poles:
    • Place the assembled vertical poles in your desired location, ensuring they are aligned.
    • Adjust the height of each pole by extending the telescopic sections and tightening the locking mechanisms until the pole is firmly secured between the floor and ceiling. Ensure the pole is vertical.
  5. Attach Horizontal Rails:
    • Attach the Horizontal Rails (4) to the vertical poles at your desired heights using the Rail Clamps (D). Tighten the screws (J) to secure them.
    • Ensure rails are level before fully tightening.
  6. Install Shelves:
    • Attach the Shelf Brackets (7) to the vertical poles at your desired shelf heights.
    • Insert the Shelf Support Rods (5) into the Shelf Brackets (7) and secure them.
    • Place the Shelves (6) onto the installed Shelf Support Rods (5).
    • Adjust the position of the shelves as needed, ensuring they are level and secure.

For visual guidance on assembly, please refer to the detailed diagrams in the official PDF user manual: SoBuy KLS17-WN User Manual (PDF).

5. Operating Instructions

Adjusting Height and Width:

  • The vertical poles are telescopic. To adjust height, loosen the locking mechanism, extend or retract the pole to the desired height (between 214-295 cm), and then firmly tighten the locking mechanism.
  • The horizontal rails can be adjusted in width by sliding them along the pole clamps. The overall width can range from 151-198 cm.

Using Rails and Shelves:

  • Hang clothes on hangers directly onto the horizontal rails.
  • Use the shelves for folded clothing, shoes, bags, or storage boxes.
  • Ensure weight is distributed evenly to maintain stability and prevent overloading any single section.
Detailed dimensions diagram of SoBuy KLS17-WN

Image: Detailed dimensions diagram showing adjustable height and width.

6. Maintenance

  • Cleaning: Wipe down metal parts with a soft, damp cloth. For wooden shelves, use a dry or slightly damp cloth. Avoid abrasive cleaners or harsh chemicals.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
  • Stability: Ensure the telescopic poles maintain firm tension between the floor and ceiling. Adjust if any looseness is detected.

7. Troubleshooting

Issue: The wardrobe system feels unstable or wobbly.

  • Solution 1: Check that all telescopic pole sections are fully extended and securely locked into place, creating firm tension between the floor and ceiling.
  • Solution 2: Verify that all screws on clamps and connectors are tightly fastened.
  • Solution 3: Ensure weight is evenly distributed. Remove excess items if the system is overloaded.

Issue: Clothes rails or shelves are sagging.

  • Solution 1: Check the load on the specific rail or shelf. Ensure it does not exceed its individual capacity or the overall system capacity.
  • Solution 2: Re-tighten the clamps holding the rails or shelf brackets to the vertical poles.

8. Specifications

FeatureDetail
ModelKLS17-WN
BrandSoBuy
MaterialSteel rods, Plastic connectors, Wooden shelves
ColorWhite Nature
Adjustable Height214 - 295 cm (84.3 - 116.1 inches)
Adjustable Width151 - 198 cm (59.4 - 78 inches)
Max. Load Capacity45 kg (99 lbs)
Product Weight8 kg (17.6 lbs)
Package Dimensions111 cm (L) x 27 cm (W) x 13 cm (H)
Package Weight15.55 kg (34.3 lbs)

*Note: Product weight refers to the item itself, while package weight includes packaging materials.

9. User Tips

  • Maximize Space: Utilize storage bins or baskets on shelves for smaller items to keep the area tidy.
  • Seasonal Storage: Adjust rail heights to accommodate longer garments like coats or dresses during different seasons.
  • Corner Configuration: This system can be set up in a straight line or an L-shape to fit various room layouts. Plan your configuration before final assembly.

10. Warranty and Support

For any questions, concerns, or support regarding your SoBuy KLS17-WN telescopic wardrobe system, please contact SoBuy customer service directly.

Customer Service Email: customer.service22@sobuy-shop.com

Please have your model number (KLS17-WN) ready when contacting support.

For the most comprehensive assembly instructions and visual aids, please download the official PDF user manual: SoBuy KLS17-WN User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.