HSmartcam IP70

Contents

HSmartcam 2-Wire Digital Tuya Wifi Video Intercom System

Model: IP70

1080P Password IC Card Doorphone Camera Video Doorbell Support Gate and Door

1. Product Overview

The HSmartcam 2-Wire Digital Tuya Wifi Video Intercom System is a comprehensive security solution designed for homes and apartments. It features a 1080P camera, a touch-screen indoor monitor (available in 7-inch or 10-inch sizes), and supports multiple unlocking methods including app, IC card, and password. The system integrates with the Tuya Smart or Smart Life app for remote access and control, ensuring you never miss a visitor.

HSmartcam 7-inch and 10-inch monitors with doorbell
Figure 1: HSmartcam 7-inch and 10-inch monitors with doorbell unit.
HSmartcam 7-inch video intercom kit components
Figure 2: HSmartcam 7-inch video intercom kit showing monitor, doorbell, RFID cards, and mobile app integration.

2. Package Contents

Please check the package for the following items:

  • 1 x 7-inch color Indoor Monitor
  • 1 x Monitor mounting plate
  • 1 x Outdoor Doorbell Camera
  • 1 x Doorbell mounting plate
  • 10 x Inductive Cards
  • 1 x Power adapter (24V 1A)
  • 5 x 200mm 2-pin connectors
  • 1 x Screw Bag
  • 1 x User Manual
Package contents for the 7-inch white LCD video intercom kit
Figure 3: Detailed view of the package contents for the 7-inch white LCD video intercom kit.

3. Setup and Installation

3.1 Outdoor Intercom Panel Installation

The intercom panel should be installed at a height of approximately 1.6 meters (63 inches) from the ground. Avoid direct sunlight and heavy rain exposure. Securely fix the intercom panel to a wall, wooden board, or door.

Recommended installation height for the intercom panel
Figure 4: Recommended installation height for the outdoor intercom panel (160cm from ground, 130cm H viewing angle).

Installation Steps (with optional rain cover):

  1. Use drill bits to drill three holes for mounting or to replace your existing doorbell.
  2. Separate the rain cover from the intercom panel.
  3. Remove the screws inside the intercom panel.
  4. Fasten the bottom shell and rain cover to the wall.
  5. Align the intercom panel with the top of the rain cover.
  6. Pull the intercom panel down to lock the bottom case and fix the bottom screws.
  7. Fix the wall bracket to the wall with two screws.
Detailed installation steps for the doorbell unit
Figure 5: Step-by-step diagram for installing the outdoor doorbell unit.

3.2 Indoor Monitor Installation

  1. Insert the MicroSD card into the slot of the monitor.
  2. Connect the other end of the 2-wire cable to the "Last" port of the monitor.
  3. Connect the monitor to a 24V 1A Plug-In Adapter or DIN Rail Power supply (not supplied).
  4. Hang the monitor on the wall bracket.

3.3 Wiring Diagram

The system uses a 2-wire connection between the intercom panel and the monitor(s). An optional electric lock can also be integrated.

Wiring diagram for the 2-wire video intercom system
Figure 6: Wiring diagram for connecting the doorbell, monitor, and optional electric lock.

Wiring Color Code:

  • Purple Brown: Door Exit
  • Red: Lock+
  • Black: Lock-
  • Yellow Green: Gate
  • 2-core port (White Blue): Main monitor
Detailed component diagram of intercom panel and monitor
Figure 7: Detailed component diagram of the intercom panel and monitor, showing connection points.

3.4 App Setup (Tuya Smart / Smart Life)

The main monitor connects to the "Tuya Smart" or "Smart Life" app. This allows up to 20 app users to connect, talk to visitors, monitor, unlock, and access cloud storage from anywhere.

  1. Download the "Tuya Smart" or "Smart Life" app from the App Store or Google Play.
  2. Register for an account if you are a first-time user.
  3. After logging in, create a family by navigating to "Me" -> "Home Management" -> "Create a home". The user who adds the device becomes the family owner.
  4. Scan the QR code displayed on the monitor's menu to add the device to the app.
  5. Once the home owner adds the doorphone, other home members can automatically add the doorphone. Home members can open locks and gates, but shared accounts cannot.
Tuya Smart app integration with video intercom system
Figure 8: Demonstrates remote interaction with the doorbell via the Tuya Smart app.

4. Operating Instructions

4.1 Monitor Interface

The indoor monitor features a user-friendly touch interface. Key elements include the status bar, menu options, and settings.

Indoor monitor interface layout
Figure 9: Layout of the indoor monitor interface with numbered indicators for status bar, menu, and settings.

Status Bar Icons:

Explanation of status bar icons on the monitor
Figure 10: Explanation of various status bar icons, including WiFi, TF card, human detection, and ringtone volume.

Menu Options:

  • Internal Call: Initiate communication between connected indoor monitors.
  • Live View: View live feed from the outdoor camera.
  • Playback: Access recorded videos and snapshots.
  • Camera: View connected additional cameras (if any).

4.2 Unlocking Functions

The system supports multiple methods for unlocking doors and gates:

  • App Unlock: Use the Tuya Smart/Smart Life app on your smartphone to remotely unlock.
  • RFID Card Unlock: Swipe a pre-programmed 13.56MHz RFID card on the intercom panel.
  • Password Unlock: Enter a 4-8 digit password on the intercom panel's keypad.
Unlocking methods: App, RFID card, and password
Figure 11: Visual representation of the three unlocking methods: App, RFID card, and password.

Setting up RFID Cards and Passwords:

RFID badge and password setup interface
Figure 12: Interface for setting up RFID badges and 4-8 digit passwords for access control.

4.3 Motion Detection and Recording

The system supports human detection and motion detection recording. When triggered, the camera will automatically record videos or take snapshots and save them to the inserted Micro SD card.

  • You can set specific motion zones to reduce unwanted alerts.
  • The camera features Wide Dynamic Range (WDR) and distortion correction for clear, accurate images.
Human detection features and motion zone setup
Figure 13: Illustrates human detection capabilities and how to set up motion zones.
Smart motion detection and video recording with 32GB TF card
Figure 14: Shows smart motion detection triggering video recording to a 32GB TF card.
Image distortion correction for wide-angle lenses
Figure 15: Comparison of images with and without Wide Dynamic Range (WDR) and distortion correction.

4.4 Multi-Language Support

The system supports multiple languages, including English, Russian, Arabic, French, Spanish, German, and others, for ease of use.

Multi-language selection screen on the monitor
Figure 16: Multi-language selection screen on the monitor.

4.5 Product Demonstration Video

Video 1: A demonstration of the HSmartcam video intercom system's features, including doorbell calls, unlocking via password and RFID card, and remote unlocking via smartphone app.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the monitor and outdoor panel. Avoid abrasive cleaners or solvents.
  • Outdoor Panel Care: The outdoor panel has an IP65 waterproof design and is built with anti-oxidation aluminum alloy. While it is designed to withstand rain, clouds, cold, and snow, regular inspection for debris or damage is recommended.
  • SD Card Management: Regularly check the Micro SD card for available storage. Back up important recordings and delete old files to ensure continuous recording. The system supports Micro SD cards up to 512GB (Class 10 recommended).
  • Software Updates: Check the monitor's settings or the Tuya Smart/Smart Life app for available firmware updates to ensure optimal performance and security.

6. Troubleshooting

This section addresses common issues you might encounter with your HSmartcam video intercom system.

Problem Possible Cause Solution
No image/video on monitor or app Power supply issue, loose wiring, camera malfunction. Check power connections to both monitor and doorbell. Verify 2-wire connections are secure. Ensure the camera lens is clean and unobstructed.
No audio during intercom Microphone/speaker issue, volume settings. Check volume settings on the monitor and app. Ensure nothing is blocking the microphone or speaker on both units.
Door/Gate not unlocking Incorrect password/RFID card, wiring issue to lock, lock malfunction. Verify password or RFID card is correctly programmed. Check wiring to the electric lock. Ensure the lock itself is functioning correctly.
App not connecting to monitor WiFi connectivity issue, incorrect app setup. Ensure the monitor is connected to a stable 2.4 GHz WiFi network. Re-check app setup steps, including home creation and device pairing. Restart the monitor and router.
Motion detection not working Settings not enabled, incorrect motion zone setup. Enable human detection in the monitor settings. Adjust motion detection sensitivity and zones as needed.

7. Specifications

7.1 Indoor Monitor

  • Screen: 7" or 10.1" TFT LCD IPS touch screen
  • Resolution: 1024 x 600px
  • Memory: Support Max. 512GB Micro SD card (Class 10 recommended)
  • Connectivity: 2.4 GHz WiFi IEEE 8111 b/g/n
  • Power: 24V 1A (Power adapter included)
  • Current Consumption: 150mA
  • Power Consumption: 3.5W
  • Video Decoding: H.264
  • Dimensions (7-inch): 119 (H) x 188 (W) x 18.5 (D) mm
  • Features: Photo/video recording, dual lock/gate control, human detection, weather display, inter-monitor communication.

7.2 Outdoor Intercom Panel (Doorbell Camera)

  • Camera Sensor: CMOS color sensor, 2 Megapixels (1080P AHD)
  • Viewing Angle: Horizontal ~130°, Diagonal ~165° (2.1mm lens)
  • Night Vision: IR CUT with 4 IR LEDs
  • Features: Wide Dynamic Range (WDR), image distortion correction, human detection, motion zone settings.
  • Access Control: 13.56MHz RFID (supports up to 100 badges), Password (4-8 digits)
  • Waterproof Rating: IP65
  • Material: Metal, anti-oxidation aluminum alloy front panel
  • Current Consumption: 220mA
  • Power Consumption: 5.5W
  • Operating Temperature: -30°C to +70°C (-22°F to 158°F)
  • Dimensions: 147 (H) x 55 (W) x 22 (D) mm (or 36mm D with weather-proof shield)

7.3 System Connectivity

  • Wiring: 2-wire (no polarity) connection between intercom panel and monitors.
  • Additional Cameras: Connect up to 24 Onvif cameras in the same LAN.
  • App Users: Supports up to 20 app users for remote access.

8. User Tips

  • Remote Access: Utilize the Tuya Smart or Smart Life app to answer your door, monitor your entrance, and unlock doors/gates from anywhere, even when you're not home. This is especially convenient for receiving packages or assisting family members.
  • Security Monitoring: Enable motion detection and set up specific motion zones to receive alerts and record activity around your entrance. Regularly review recorded footage for enhanced security.
  • Multiple Unlocking Options: Take advantage of the various unlocking methods. Use RFID cards for quick entry, passwords for guests or service providers, and the app for remote access.
  • Inter-Monitor Communication: If you have multiple indoor monitors, use the internal call function for convenient communication between rooms.
  • SD Card Maintenance: To ensure continuous recording and prevent storage issues, periodically check the Micro SD card's capacity and back up important video clips.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact HSmartcam Official Store directly through your purchase platform. Keep your purchase receipt or order details handy for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.