1. Introduction
The Xincode GT-2013-2d wireless barcode scanner is a high-performance, industrial-grade device designed for efficient and reliable barcode decoding. Featuring a CPU+NPU Dual Core Processor, it offers fast platform decoding with millisecond-level algorithm time, ensuring result output without delay. This scanner is capable of reading various 1D, 2D, and stacked codes, including challenging DPM codes and difficult inkjet codes (overflow, broken frames, smudged, scratched, distorted, wrinkled). Its robust design is waterproof and dustproof (IP52 rated), suitable for harsh environments, and can withstand free falls of up to 1.5 meters.
The device utilizes white light LED illumination and a global CMOS sensor with 1280*1024 resolution for superior scanning accuracy. It supports 2.4G wireless communication for stable and reliable signal transmission and comes with a 2750 mAh chargeable lithium battery for long standby time.
2. Key Features
- Advanced Processor: Equipped with a CPU+NPU Dual Core Processor for rapid decoding.
- Superior Decoding Capability: Efficiently reads 1D, 2D, and stacked codes, including DPM and difficult inkjet codes.
- High-Resolution Sensor: Global CMOS sensor with 1280*1024 resolution and white light LED illumination.
- Durable Design: IP52 waterproof and dustproof rating, with 1.5m free fall resistance for industrial use.
- Wireless Connectivity: Stable 2.4G wireless communication with an 80m open range.
- Long Battery Life: 2750 mAh chargeable lithium battery providing up to 36,000 scans on a full charge (6 hours charging time).
- Multiple Interfaces: USB 2.0 (Type B) for the code reader and USB 2.0 (Type B/A) for the smart base.
- Compact and Lightweight: Code reader approx. 160g, smart base approx. 120g.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Xincode |
| Model | GT-2013-2d wireless (GT-2013RF-05N-W1U / GT-2013RF-05S-W1U) |
| Type | Barcode Scanner |
| Scan Element Type | CMOS, Global Shutter |
| Colour Depth | 32 Bit |
| Interface Type | USB-HID |
| Optical Resolution | ≥4mil |
| Scan Speed | 300/sec |
| Material | ABS+PVC+PC |
| Light Source | White LED |
| Max. Frame Rate | 50fps |
| Sensor Type | COMS, Global Shutter |
| Resolution | 1280*1024 |
| Reading Frequency | 2.4G |
| Wireless Range | 80m (open range) |
| Charging Time | 6h |
| Software Development Kit (SDK) | Yes |
| Color | Black |
| Origin | Mainland China, Guangdong |
| Feature | GT-2013RF-05N-W1U | GT-2013RF-05S-W1U |
|---|---|---|
| Symbologies | 1D Codes: Code 39, Code 93, Code 128, CodaBar, EAN 8, EAN 13, ITF 25, ITF 14, UPCA, UPCE 2D Codes: QR Code, Data Matrix, MicroQR, Aztec, Han Xin Stacked Codes: PDF417 | |
| Min. Accuracy | 1D Codes: 2 mil 2D Codes: 4 mil | 1D Codes: 3 mil 2D Codes: 10 mil |
| Max. Frame Rate | 50 fps | |
| Sensor Type | CMOS, Global Shutter | |
| Pixel Size | 2.7 µm × 2.7 µm | |
| Sensor Size | 1/4" | |
| Resolution | 1280 × 1024 | |
| Depth of Field | Code 128 (3 mil): 30 mm to 110 mm Code 128 (10 mil): 20 mm to 205 mm Data Matrix (5 mil): 40 mm to 85 mm QR Code (10 mil): 20 mm to 140 mm QR Code (20 mil): 20 mm to 200 mm | Code 128 (3 mil): 70 mm to 160 mm Code 128 (10 mil): 30 mm to 440 mm Data Matrix (5 mil): 45 mm to 235 mm QR Code (10 mil): 20 mm to 350 mm QR Code (20 mil): 20 mm to 460 mm |
| Field of View | Horizontal 39°, Vertical 29° | |
| Detection Angle | Tilt angle ± 60°, Skew angle ± 60°, Rotation angle 360° | |
| Symbol Contrast | 20% | |
| Wireless Communication | Radio Frequency: 2.4 G Wireless Range: 80 m (open range) Communication Protocol: SmartSDK, USB, 2.4 G | |
| Electrical Features | Data Interface: Code reader: USB 2.0 (Type B); Smart base: USB 2.0 (Type B), USB 2.0 (Type A) Battery: 2750 mAh, chargeable lithium battery Charging Time: 6 h Number of Scans: 36000 times (full charging) Power Supply: 5 VDC Max. Power Consumption: 6 W@5 VDC | |
| Mechanical Features | Focal Length: 4.9 mm Lens Mount: M5.0-mount Ambient Illumination: 0 lux to 100000 lux Light Source: White LED Aiming System: Orange LED Prompt: LED indicator, buzzer Dimension (Code reader): 66.5 mm × 94 mm × 169.5 mm (2.6" × 3.7" × 6.7") Dimension (Smart base): 82.5 mm × 121.8 mm × 76.1 mm (3.3" × 4.8" × 3.0") Weight (Code reader): Approx. 160 g (0.35 lb.) Weight (Smart base): Approx. 120 g (0.26 lb.) | |
4. Setup Guide
4.1 Unpacking and Initial Inspection
Carefully unpack the barcode scanner and its accessories. Verify that all components are present:
- Xincode GT-2013-2d Wireless Barcode Scanner
- Smart Charging Base
- USB Cable
- User Manual (this document)
Inspect the scanner and base for any visible damage. If any damage is found, do not proceed with setup and contact customer support.
4.2 Charging the Scanner
- Connect the USB cable to the Smart Charging Base and plug the other end into a power source (e.g., computer USB port or USB wall adapter).
- Place the barcode scanner onto the charging base. Ensure it is seated correctly.
- The scanner's LED indicator will show charging status. A full charge takes approximately 6 hours.
4.3 Connecting the Smart Base to a Host Device
The smart base connects to your computer or host system via a USB cable.
- Plug the USB cable into the USB 2.0 Type B port on the smart base.
- Connect the USB Type A end of the cable to an available USB port on your computer.
- The system should automatically detect and install the necessary drivers. If not, refer to your operating system's device manager for troubleshooting or contact support.
5. Operating Instructions
5.1 Powering On/Off
- To power on the scanner, press and hold the trigger button for a few seconds until you hear a beep and the LED indicator lights up.
- To power off, press and hold the trigger button until you hear a series of beeps and the LED indicator turns off.
5.2 Scanning Barcodes
- Ensure the scanner is powered on and connected to the smart base (or directly via USB if applicable).
- Point the scanner's aiming system (orange LED) at the center of the barcode.
- Press the trigger button. The white LED illumination will activate, and the scanner will attempt to read the barcode.
- A successful scan will be indicated by a beep and/or a change in the LED indicator. The decoded data will be transmitted to your host device.
5.3 Decoding Difficult Codes
The Xincode GT-2013-2d is designed with a robust code reading algorithm to handle various challenging codes:
- DPM Codes: For Direct Part Mark (DPM) codes, ensure adequate lighting and try scanning from different angles and distances.
- Damaged/Wrinkled Codes: The scanner's advanced imaging can often read codes with minor damage. Try adjusting the angle or distance to find a readable section.
- Low Contrast Codes: The scanner's white light LED illumination helps improve contrast for better decoding.
5.4 Continuous and Batch Scanning
The scanner supports continuous code reading and batch code reading for improved efficiency. Refer to the detailed programming guide (usually found in the full manual or SDK) for specific settings to enable these modes.
6. Maintenance
6.1 Cleaning the Scanner
- Regularly clean the scanner's scanning window with a soft, lint-free cloth.
- For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaning solution. Do not spray liquids directly onto the scanner.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the device.
6.2 Battery Care
- To prolong battery life, avoid fully discharging the battery frequently.
- Store the scanner in a cool, dry place when not in use for extended periods.
- If the scanner will not be used for a long time, charge it to about 50% before storage.
6.3 Environmental Considerations
While the scanner is IP52 rated for dust and water resistance and designed for industrial use, avoid exposing it to extreme temperatures, direct sunlight, or highly corrosive environments for prolonged periods.
7. Troubleshooting
7.1 Scanner Not Reading Barcodes
- Check Aiming: Ensure the orange LED aiming system is centered on the barcode.
- Distance/Angle: Adjust the distance and angle to the barcode. Some codes require specific distances for optimal reading.
- Barcode Quality: Verify the barcode is not severely damaged, smudged, or poorly printed beyond the scanner's capability.
- Lighting: Ensure sufficient ambient light, but avoid direct glare on the barcode.
- Symbology Enabled: Confirm that the specific barcode symbology (e.g., QR Code, Code 128) is enabled in the scanner's settings. Refer to the programming guide for configuration barcodes.
7.2 No Data Transmission to Host
- Connection: Ensure the smart base is securely connected to the host device via USB.
- Power: Verify the scanner and base are powered on.
- Drivers: Check if the USB drivers are correctly installed on your computer. Try reconnecting the USB cable or restarting the computer.
- Wireless Link: For wireless operation, ensure the scanner is properly paired with its smart base. If not, re-pair the devices according to the programming guide.
7.3 Scanner Not Charging
- Cable/Adapter: Check the USB cable and power adapter for damage and ensure they are properly connected.
- Base Connection: Make sure the scanner is correctly seated on the charging base.
- Power Source: Try a different USB port or power adapter.
8. User Tips
- Optimize Scanning Angle: For reflective surfaces, try scanning at a slight angle to avoid glare.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and compatibility.
- Backup Settings: If you customize scanner settings using programming barcodes, keep a record or scan sequence of these settings for easy restoration.
- Battery Management: For prolonged wireless use, consider having a spare charged battery or regularly placing the scanner on its base during breaks.
9. Warranty and Support
The Xincode GT-2013-2d Wireless Barcode Scanner comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any inquiries regarding your product, please contact your vendor or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty services.
Manufacturer Contact Information:
- WhatsApp/WeChat: Jack +86 19074935331
- Email: 3981883272@qq.com
For more information about Xincode Technology and its products, you may visit their official website.