Introduction
Welcome to the world of urban mobility with your new KUGOO M3 Pro Electric Scooter. This manual provides essential information for the safe operation, maintenance, and care of your scooter. Please read it thoroughly before your first ride to ensure optimal performance and safety.
Video: KUGOO M3 Pro in action, demonstrating riding on various terrains.
Safety Guidelines
⚠️ WARNING: Riding an electric scooter can be dangerous. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads. Familiarize yourself with local laws and regulations regarding electric scooter use.
- Always check the scooter before each ride for any loose parts, tire pressure, and brake functionality.
- Do not ride in heavy rain or through puddles deeper than 2 cm.
- Avoid riding on slippery surfaces, steep inclines, or uneven terrain.
- Maintain a safe distance from other vehicles and pedestrians.
- Do not perform stunts or sudden maneuvers.
- Ensure the battery is properly charged and stored according to instructions to prevent fire hazards.
Product Overview
The KUGOO M3 Pro is designed for efficient and comfortable travel. This lightweight electric scooter features a powerful 600W engine and a 48V 13Ah battery, ensuring a maximum speed of 46 km/h. With a max load capacity of 120 kg and weighing only 28 kg, it’s perfect for daily commuting or leisure rides.
- Powerful 600W brushless motor with 773W peak power output.
- High-capacity 48V 13Ah (624Wh) battery.
- 10-inch pneumatic tires for enhanced grip and stability.
- Dual front and rear suspension for a smooth ride.
- NFC Smart Unlocking for secure and easy access.
- E-Brake + Dual Disc Brakes for reliable stopping power.
- Foldable design for portability and convenient storage.
- Integrated LED lighting system with headlight and turn signals.
Image: Overview of the KUGOO M3 Pro Electric Scooter, highlighting its 600W Motor, 48V 13AH Battery, and 10-inch Tires.
Setup and Assembly
Your KUGOO M3 Pro Electric Scooter comes partially assembled. Follow these steps for initial setup:
- Unfolding the Scooter:
- Carefully remove the scooter from its packaging.
- Locate the folding mechanism (refer to image below).
- Release the latch and lift the handlebar stem until it locks into place. Ensure it is securely fastened.
- Adjust the handlebar height if necessary and tighten the locking clamp.
- Handlebar Attachment (if separate):
- Attach the handlebars to the stem, ensuring all cables are free from pinching.
- Tighten any screws or clamps as per the included hardware.
- Initial Charge:
- Before first use, fully charge the scooter's battery. The charging time is approximately 9 hours.
- Connect the charger to the charging port on the scooter, then plug it into a power outlet.
- The indicator light on the charger will change (e.g., from red to green) when charging is complete.
- Tire Check:
- Verify that the 10-inch pneumatic tires are properly inflated to the recommended pressure (check tire sidewall for details).
Image: Illustration of the scooter's folding mechanism for easy transport and storage.
Operating Instructions
- Power On/Off:
- Press and hold the power button on the handlebar display to turn the scooter ON or OFF.
- NFC Smart Unlocking:
- To unlock the scooter, tap your NFC card key against the designated area on the display. The display will activate, indicating the scooter is ready to ride.
Image: Close-up of the NFC card key being used to unlock the scooter, showing the display with "CARD" indicator.
- Riding the Scooter:
- Place one foot on the deck and push off with the other foot to gain initial momentum.
- Once moving, gently press the accelerator lever to engage the motor.
- Maintain balance and keep both hands on the handlebars.
- Speed Modes:
- The KUGOO M3 Pro features three speed modes: 22 KM/H, 35 KM/H, and 46 KM/H (Max Speed).
- Use the mode button on the handlebar to switch between speed settings according to your preference and riding conditions.
Image: Side view of the scooter highlighting the 600W motor and indicating three speed modes (22/35/46 KM/H).
- Braking:
- To slow down or stop, gently squeeze the brake levers on the handlebars. The scooter is equipped with an E-Brake and Dual Disc Brakes for effective stopping.
- Apply brakes smoothly to avoid sudden stops.
Image: Close-up of the rear wheel and disc brake system.
- Lighting System:
- Activate the LED headlight and turn signals using the controls on the handlebar for visibility, especially during night rides.
Image: The scooter's LED headlight and rear turn signals illuminated for night visibility.
Maintenance
Regular maintenance ensures the longevity and safe operation of your KUGOO M3 Pro.
- Cleaning: Wipe down the scooter with a damp cloth. Do not use high-pressure water jets or immerse the scooter in water.
- Tires: Regularly check tire pressure and inflate as needed. Inspect tires for wear and tear or punctures.
- Brakes: Periodically check brake pads and cables for wear. Adjust or replace as necessary to maintain effective braking.
- Battery Care:
- Charge the battery fully after each use.
- Avoid completely draining the battery.
- If storing for an extended period, charge the battery to about 50-70% and store in a cool, dry place. Recharge every 1-2 months.
- General Inspection: Routinely check all screws, bolts, and folding mechanisms for tightness. Lubricate moving parts as recommended by the manufacturer.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not turn on | Low battery, NFC card not detected, loose connection. | Charge the battery. Ensure NFC card is properly scanned. Check all visible cable connections. |
| Reduced range or power | Under-inflated tires, low battery charge, riding uphill frequently, heavy load. | Check tire pressure. Fully charge the battery. Reduce load or avoid steep inclines. |
| Brakes feel weak | Worn brake pads, loose brake cable. | Inspect and replace brake pads if worn. Adjust brake cable tension. |
| Unusual noises during ride | Loose components, debris in wheels, motor issue. | Inspect all parts for tightness. Clear any debris from wheels. If noise persists, contact support. |
Specifications
Image: Detailed product parameter table.
| Feature | Specification |
|---|---|
| Type | Electric Scooter |
| Model | M3 Pro |
| Motor Power | 600W (773W Peak Output) |
| Battery | 48V 13Ah (624Wh) |
| Max Speed | 46 km/h |
| Speed Modes | 22 KM/H, 35 KM/H, 46 KM/H |
| Medium Speed Mileage | Up to 52 km (tested with 65 kg load) / Up to 64 km (general claim) |
| Max Load | 120 kg |
| Charging Time | 9 hours |
| Wheel Size | 10-inch pneumatic tires (inner tube 10"/outer tire 10x2.5) |
| Braking System | E-Brake + Dual Disc Brakes |
| Suspension | Dual Front and Rear |
| Unfolded Dimensions (L x W x H) | 1320 x 640 x 1290 mm (from table) / 1310mm (height), 655mm (handlebar width) (from image) |
| Folded Dimensions (L x W x H) | 1320 x 240 x 540 mm (from table) / 525mm (height), 280mm (width), 1310mm (length) (from image) |
| Deck Dimensions (L x W) | 490 mm x 190 mm |
| Net Weight | 28 kg |
| Recommended Rider Height | 150-200 cm |
Image: Visual representation of scooter dimensions, recommended rider height, and load capacity.
User Tips
- Local Regulations: Always check your local traffic laws and regulations regarding electric scooters. Some regions may require specific permits (e.g., ABE in Germany) or have restrictions on speed and usage areas.
- Smooth Riding: For the most comfortable ride, utilize the dual suspension and 10-inch pneumatic tires by avoiding sudden turns and maintaining a steady speed, especially on varied terrains like cobblestone or gravel.
- Battery Optimization: To maximize battery life and range, try to maintain a consistent speed and avoid frequent rapid acceleration and braking.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
