Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Varstrom Rear Rack E-Bike Battery. Please read this manual carefully before using the product to ensure safe and optimal performance. This battery is designed for electric bicycles and is compatible with various e-bike kits and motors.

Important Safety Warnings
- Fire Risk: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- Disposal: For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
- Always use the provided charger. Using an incompatible charger may damage the battery and pose a fire hazard.
- Do not disassemble, puncture, or modify the battery.
- Keep the battery away from water, fire, and extreme temperatures.
Packing List
Before installation, please ensure all items are present in the package:
- Battery and Base
- Battery Rear Rack
- Battery Charger (4A fast charger)
- Keys (for anti-theft lock)
- Accessories (mounting hardware)
- User Manual (this document)

Setup and Installation
The Varstrom Rear Rack E-Bike Battery is designed for easy installation and removal. Follow these steps to mount the battery on your e-bike:
- Assemble the Luggage Rack: Attach any necessary components to the rear luggage rack as per the included accessories.
- Secure the Luggage Rack to the Bike Frame: Mount the assembled luggage rack securely to the rear of your bicycle frame. Ensure all bolts are tightened properly. The rack is made of aluminum alloy for secure mounting.
- Insert the Battery and Lock: Slide the battery onto the base plate of the secured luggage rack. Once in position, use the provided key to lock the battery in place. This anti-theft lock helps prevent unauthorized removal.
Compatibility Note: This battery is highly compatible with a wide range of electric bicycles and e-bike kits, including mid-drive and hub motors. It supports motors from 200W to 1500W. It can fit 24", 26", 27.5", and 28" bike frames. Ensure you select the correct battery voltage (36V or 48V) to match your motor's voltage.

Operation
Familiarize yourself with the battery's features for optimal use:
- Charging: Use the included 4A fast charger to charge the battery. Connect the charger to the charging port on the battery, then plug it into a power outlet. The LED indicator will show charging status.
- LED Battery Level Indicator: The battery features an LED indicator to display the current charge level. Monitor this to know when to recharge.
- USB Port: A 5V 1A USB output port is integrated into the battery, allowing you to charge your cell phone or other small electronic devices on the go.

The integrated USB port for convenient device charging. - Tail Light: The battery unit includes a tail light for enhanced safety during night riding. It has an individual switch for control.

Detail of the taillight switch. - Anti-theft Lock: Use the provided keys to lock and unlock the battery from the rear rack, securing it against theft.

Maintenance
Proper maintenance ensures the longevity and performance of your Varstrom E-Bike Battery:
- Charging Cycles: The battery is designed for over 2000 charge cycles. After 1000 charge and discharge cycles, it retains over 80% of its original capacity. Regular charging within recommended parameters will help maintain this performance.
- Storage: When not in use for extended periods, store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50-60%) before storage. Avoid storing a fully charged or completely depleted battery.
- Cleaning: Wipe the battery exterior with a dry or slightly damp cloth. Do not use harsh chemicals or immerse the battery in water.
- Discharge Port: The upgraded 6PIN discharge port is designed to reduce the risk of burnout. Keep it clean and free from debris to ensure a secure connection.
Troubleshooting
The Varstrom E-Bike Battery is equipped with an intelligent 30A BMS (Battery Management System) protection board to prevent common issues. If you encounter problems, consider the following:
- No Power Output:
- Check if the battery is securely locked onto the rack and properly connected to your e-bike's motor system.
- Verify the battery charge level using the LED indicator. Recharge if necessary.
- Ensure the battery's power switch is in the "ON" position.
- Charging Issues:
- Confirm the charger is correctly plugged into both the battery and the wall outlet.
- Check for any damage to the charger cable or charging port.
- If the battery is extremely hot or cold, it may not charge. Allow it to return to room temperature.
- Reduced Range:
- Battery capacity naturally degrades over time and charge cycles.
- Environmental factors like cold weather, hilly terrain, and rider weight can affect range.
- Ensure tires are properly inflated and the e-bike is well-maintained.
- BMS Protection Activation: The intelligent BMS protects against:
- Overcurrent protection
- Overvoltage protection
- Overload protection
- Overcharge protection
- Over-discharge protection
- Temperature control protection
- Short-circuit protection
- Cell voltage balancing

Smart BMS protection features.
For persistent issues, please refer to the Warranty/Support section for contact information.
Specifications
| Feature | Description |
|---|---|
| Brand Name | Varstrom |
| Type | Lithium battery |
| Product | Ebike Battery |
| Battery Type | Rear Rack |
| Battery Voltage Options | 36V or 48V |
| Capacity (36V) | 20.8Ah (768Wh) |
| Capacity (48V) | 17.5Ah (840Wh) |
| Maximum Constant Discharge Current | 30 A (BMS) |
| Cells | Quality Grade A cells, 18650 2600MAH |
| Weight (approx.) | 3.9 KG (36V), 6 KG (48V) |
| Cycle Life | 1000 times (retains >80% capacity) |
| Charge Time (36V 20.8Ah) | 6 hours (with 4A fast charger) |
| Dimensions (approx.) | 476mm (18.7") L x 165mm (6.49") W x 89mm (3.5") H |
| Certification | CE, RoHS, UL |
| Motor Compatibility | 250W, 500W, 750W, 1000W, 1500W (Bafang, Tongsheng) |

Estimated Drive Range
Based on test conditions (Temperature: 20°C, Rider Weight: 70 kg, Test Motor: 36V 250W):
- Electric Mode: 80-85 km
- Pedal Assist Mode: 160-170 km

Warranty and Support
- Warranty Period: The Varstrom E-Bike Battery comes with a 2-year warranty.
- Maintenance Points: Service and maintenance points are available in Poland, France, and the UK.
- Customer Support: If you encounter any problems with the product or require assistance, please contact our customer service. Good communication can help resolve issues faster.
User Tips
- The battery package includes the luggage rack, so you do not need to purchase it separately.
- Ensure the battery is fully charged before your first long ride to maximize initial performance.
- Always double-check that the battery is securely locked to the rack before riding to prevent accidental detachment.