1. Product Overview
The KOPUO Car Jump Starter is a versatile and powerful device designed for emergency vehicle starting and as a portable power bank. It delivers a 600A peak current, capable of restarting 12V vehicles with up to 5.0L gas or 4.0L diesel engines. Equipped with a smart digital display, a multi-mode LED flashlight, and various charging interfaces, it's an essential tool for roadside emergencies and outdoor activities.
2. Product Specifications
| Feature | Specification |
|---|---|
| Brand Name | KOPUO |
| Peak Current | 600A (up to >1200A in some configurations) |
| Fast Charge | Two-Way Fast Charge |
| Special Features | USB, Lighting, Warning Light, SOS Lighting |
| Voltage | 12 V |
| Conversion Rate | >90% |
| Battery Capacity | 5000 - 8000 mAh |
| Number Of Built-in Batteries | 4 |
| Input | 5V/2A (Type-C) |
| Output | 5V/2A, 12V (USB) |
| Suitable Temperature | -20℃ to 60℃ |
| Cycle Life | ≥1000 times |
| Certifications | UL, MSDS, CE |
| Dimensions (approx.) | 192mm x 93mm x 41mm |
3. Setup and Operating Instructions
3.1. Jump Starting a Vehicle
Before starting, ensure the jump starter's battery level is above 75% for optimal performance. The device is suitable for 12V vehicles with up to 5.0L gas or 4.0L diesel engines.
- Connect the blue plug (DO socket) of the jumper cables to the jump starter unit.
- Connect the red clamp to the positive (+) terminal of your car battery.
- Connect the black clamp to the negative (-) terminal of your car battery.
- Start your car engine.
- Once the car starts, immediately remove the jumper cables from the car battery within 30 seconds.
- Then, disconnect the blue plug from the jump starter unit.
Video 1: Demonstration of KOPUO Car Jump Starter usage for vehicle starting and device charging.
3.2. Using the LED Flashlight
The jump starter features a 300-lumen LED flashlight with multiple modes:
- Stable Light: Press the flashlight button once to turn on the steady light.
- Strobe Mode: Press the button again to activate the strobe light.
- SOS Mode: Press the button a third time to enter SOS signaling mode.
- Turn Off: Press the button a fourth time to turn off the light.
3.3. Using as a Portable Power Bank
The device can also function as a portable power bank to charge your electronic devices. It includes USB and Type-C charging interfaces.
- Connect your device (e.g., cell phone, iPad, camera) to the appropriate USB or Type-C output port on the jump starter using a compatible charging cable.
- The digital display will show the charging status.
4. Safety Information and Warnings
Failure to follow these safety instructions may result in property damage, serious injury, or death.
- Battery Level: Always ensure the jump starter's electric quantity indicator light is above 75% before attempting to jump start a vehicle.
- Correct Connection: Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery terminal. Incorrect connection (reverse polarity) can cause severe damage to the device and vehicle, and may lead to safety accidents.
- Avoid Short Circuits: Do not allow the red and black clamps to touch each other or any other metal objects when connected to the jump starter.
- Starting Attempts: Do NOT attempt more than 5 consecutive starts. If the vehicle fails to ignite after several attempts, wait at least 30 seconds between attempts to prevent overheating. If the car still doesn't start, there might be other issues with the vehicle that require professional inspection.
- Timely Removal: Remove the jump starter unit from the car battery within 30 seconds after the car starts. Leaving it connected for too long may cause safety hazards.
- No Disassembly: Do not disassemble or modify the jump starter unit yourself. Unauthorized disassembly will void the warranty and may cause safety accidents.
- Storage: Store the device in a cool, dry place away from direct sunlight and heat sources.
5. Troubleshooting
- Vehicle Does Not Start:
- Check the jump starter's battery level; ensure it's above 75%.
- Verify that the battery clips are securely connected to the correct terminals (red to positive, black to negative).
- Inspect the battery clips and terminals for rust or dirt. Clean them if necessary to ensure good contact.
- If the car still doesn't start after 5 attempts (with 30-second intervals), the vehicle may have other mechanical or electrical issues requiring professional diagnosis.
- Jump Starter Not Turning On/Charging:
- Ensure the charging cable is properly connected to both the jump starter and the power source.
- Try a different charging cable or power adapter.
6. Maintenance
- Recharging: For optimal performance and to extend battery life, recharge the jump starter every 3 months, especially when not in regular use.
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
7. User Tips
- Always keep the jump starter charged, ideally above 60%, to be ready for unexpected emergencies.
- Familiarize yourself with the LED flashlight modes (Stable, Strobe, SOS) before an emergency arises.
- The built-in compass can be a useful tool during outdoor activities or emergencies.
8. Warranty and Support
This product comes with a manufacturer's warranty. Please refer to the official documentation for specific warranty terms and conditions. For technical support or service inquiries, please contact KOPUO customer service.
A detailed user manual in PDF format is also available for download: Download User Manual (PDF)
