1. Product Overview
This manual provides instructions for the Comfast series of outdoor WiFi Repeater/Access Points, including models CF-EW71 V2, CF-EW82, and CF-EW87. These devices are designed to provide robust and extended wireless coverage in various outdoor environments, featuring high power, advanced WiFi standards, and durable IP66-rated enclosures. None of these models include a built-in modem function and Mesh support is not available.
Each model offers distinct features and performance capabilities:
- CF-EW71 V2 (WiFi 4): 2.4GHz 300Mbps, 2*5dBi Antennas, 1*100Mbps LAN Port, 1*100Mbps WAN Port, 48V 0.32A POE Power Adapter, IP66 rated.
- CF-EW82 (WiFi 5): 2.4GHz 400Mbps; 5.8GHz 867Mbps, 2*5dBi Antennas, 1*1000Mbps LAN/WAN Port, 48V 0.32A POE Power Adapter, IP66 rated.
- CF-EW87 (WiFi 7): 2.4GHz 688Mbps; 5.8GHz 2882Mbps, 3*5dBi Antennas, 2*1000Mbps LAN Ports, 1*1000Mbps WAN Port, 1*DC Power Supply Interface, 48V 0.32A POE Power Adapter/DC (12V/1.5A), IP66 rated.
2. Specifications
Detailed specifications for each model are provided below. For a quick comparison, refer to the combined specifications table.
2.1. CF-EW87 (WiFi 7 3600Mbps) Specifications
| Feature | Description |
|---|---|
| Hardware | IPQ5312+QCN6412+QCA8337, DDR: 512MB, Flash: 128MB |
| Antenna | 3*5dBi external omnidirectional antennas |
| Wireless Rate | 2.4GHz: 688Mbps; 5.8GHz: 2882Mbps (Total 3600Mbps) |
| RF Parameters | Output Power(Max): 26dBm (400mW); Receiving Sensitivity(Min): -96dBm; Frequency: 2.412GHz-2.484GHz; 5.180GHz-5.825GHz |
| Physical Ports | 2*10/100/1000Mbps LAN RJ45, 1*10/100/1000Mbps WAN RJ45, 1*DC Power Supply Interface, 1*Reset Button |
| Power Supply | POE(48V/0.32A) / DC(12V/1.5A) |
| Power Consumption | <18W |
| Waterproof Level | IP66 |
| MTBF | >250000H |
| External Material | Plastic (Imported ABS), Wall hanging and pole installation |
| Physical Features | Size: 90mm*388mm (Without antenna), Antenna length: 188mm |
| Environment | Operating Temp: -10°C ~ 55°C; Storage Temp: -40°C ~ 70°C; Operating Humidity: 10% ~ 90% RH; Storage Humidity: 5% ~ 90% RH (Non-condensing) |
2.2. CF-EW82 (WiFi 5 1300Mbps) Specifications
| Feature | Description |
|---|---|
| Hardware | MT7621AT+MT7615DN, DDR: 256MB, Flash: 16MB |
| Antenna | 2*5dBi external omnidirectional antennas |
| Wireless Rate | 2.4GHz: 400Mbps; 5.8GHz: 867Mbps (Total 1300Mbps) |
| RF Parameters | Output Power(Max): 27dBm (500mW); Receiving Sensitivity(Min): -96dBm; Frequency: 802.11b/g/n:2.412GHz-2.472GHz; 802.11ac/an/a:5.180GHz-5.825GHz |
| Physical Ports | 1*10/100/1000Mbps LAN/WAN RJ45 Ethernet port, 1*RESET |
| Power Supply | Gigabit POE (48V/0.32A) |
| Power Consumption | <18W |
| Waterproof Level | IP66 grade |
| MTBF | >250000H |
| External Material | Plastic (Imported ABS), Wall hanging and pole installation |
| Physical Features | Size: 56.9*39.7*409.6mm (including antenna length); Single antenna length: 200.3mm |
| Environment | Operating Temp: -10°C ~ 55°C; Storage Temp: -40°C ~ 70°C; Operating Humidity: 10% ~ 90% RH; Storage Humidity: 5% ~ 90% RH (Non-condensing) |
2.3. CF-EW71 V2 (WiFi 4 300Mbps) Specifications
| Feature | Description |
|---|---|
| CPU | Qualcomm QCA9533 |
| RAM (DDR) | 64MB |
| Flash Storage | 16MB |
| Power Amplifier (PA) Chipset | SE2576L * 2 |
| Antenna | Built-in 2 * 5dBi Antennas |
| Wireless Standard | IEEE 802.11b/g/n |
| Maximum Data Rate | 300Mbps |
| Frequency Band | 2.412GHz - 2.484GHz (2.4GHz Single-band) |
| Transmit Power (Max) | 500mW (27dBm) |
| Receive Sensitivity (Min) | -96dBm |
| Ethernet Ports | 1 x 10/100Mbps LAN (RJ45), 1 x 10/100Mbps WAN (RJ45) |
| Other Ports/Buttons | 1 x Reset Button |
| Status LEDs | WAN, LAN, WiFi, Power |
| Power Supply Methods | PoE (802.3af/at) (0-100m cable distance), 48V 0.32A PoE Adapter (Configured) |
| Max. Power Consumption | < 8W |
| Ingress Protection (IP) Rating | IP66 |
| Installation Method | Wall-mounted / Pole-mounted |
| Case Material | Plastic (Imported ABS) |
| Dimensions | 353 * 85 * 44 mm |
| Operating Temperature | -10°C ~ 55°C |
| Storage Temperature | -40°C ~ 70°C |
| Operating Humidity | 10% ~ 90% RH (Non-condensing) |
| Storage Humidity | 5% ~ 90% RH (Non-condensing) |
3. Package Contents
Please verify the contents of your package against the list below for your specific model.
3.1. CF-EW87 Package Contents
- CF-EW87 Outdoor Wireless AP Unit
- Network Cable
- POE Power Supply
- Cable Ties
- Waterproof Cap
- Gaskets and Screws
- Installation Manual
3.2. CF-EW82 Package Contents
- CF-EW82 Outdoor Wireless AP Unit
- Network Cable
- POE Power Supply
- Cable Ties
- Screws
- Installation Manual
3.3. CF-EW71 V2 Package Contents
- CF-EW71 V2 Outdoor Wireless AP Unit
- POE Power Adapter
- Warranty Card
- Screws
- Certificate
- Installation Guide
- Network Cable
- Stainless Steel Cable Tie
4. Installation
The Comfast Outdoor APs support both wall-mounted and pole-mounted installations. Ensure the device is placed in an optimal location for signal coverage and away from obstructions.
4.1. Identifying Ports and Indicators
Before installation, familiarize yourself with the device's ports and LED indicators.
Common ports include LAN, WAN, Reset button, and LED indicators for WAN, LAN, WiFi, and Power. The CF-EW87 also features a DC power supply interface.
4.2. Mounting the Device
Choose between wall-mounting or pole-mounting based on your outdoor environment.
4.2.1. Wall-Mounted Installation
- Mark the drilling points on the wall using the device or mounting bracket as a template.
- Drill holes and insert wall plugs if necessary.
- Secure the mounting bracket to the wall with screws.
- Attach the AP unit to the mounting bracket.
4.2.2. Pole-Mounted Installation
- Attach the mounting bracket to the back of the AP unit.
- Use the provided cable ties or stainless steel cable ties to secure the AP unit (with bracket) to a pole.
- Ensure the device is firmly attached and oriented correctly for optimal signal.
4.3. Powering the Device (PoE Connection)
All models support Power over Ethernet (PoE), allowing both power and data to be transmitted over a single Ethernet cable. The CF-EW87 also supports a DC power supply.
- Connect one end of the Ethernet cable to the WAN port of the Outdoor AP.
- Connect the other end of the Ethernet cable to the "POE" port of the provided PoE adapter.
- Connect another Ethernet cable from the "LAN" port of the PoE adapter to your router or network switch.
- Plug the PoE adapter into a power outlet.
- For CF-EW87, if using DC power, connect a 12V/1.5A DC adapter to the DC port.
5. Operation
Once installed and powered, your Comfast Outdoor AP is ready to extend your wireless network.
5.1. Initial Setup and Configuration
Refer to the included "Installation Guide" or "Quick Installation Guide" for initial setup steps, which typically involve connecting to the device's default WiFi network and accessing its web-based management interface via a web browser (e.g., 192.168.1.1). From there, you can configure network settings, WiFi name (SSID), password, and operating mode (AP, Repeater, etc.).
5.2. AC Management (for Multiple APs)
For large-scale deployments with multiple Comfast APs, centralized management can be achieved using a Comfast AC (Access Controller) device. This allows for unified configuration, upgrades, data query, and remote control, simplifying network management and reducing operational costs.
5.3. Seamless Roaming
The Comfast Outdoor APs support intelligent roaming technology. In environments with multiple APs, devices can automatically connect to the strongest WiFi signal in the coverage area, ensuring stable and uninterrupted network connectivity as users move around.
6. Maintenance
To ensure optimal performance and longevity of your Comfast Outdoor AP, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the exterior of the device to remove dust, dirt, and debris. Use a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Check Connections: Ensure all cable connections (Ethernet, power) are secure and free from damage.
- Firmware Updates: Check the manufacturer's website for available firmware updates. Keeping the firmware updated can improve performance, add new features, and enhance security.
- Environmental Protection: The device is IP66 rated for outdoor use, providing protection against dust and powerful water jets. However, avoid direct exposure to extreme conditions beyond its operating temperature range.
7. Troubleshooting
If you encounter issues with your Comfast Outdoor AP, try the following troubleshooting steps:
- No Power:
- Ensure the PoE adapter is properly connected to a power outlet and the AP.
- Check the Ethernet cable for damage if using PoE.
- For CF-EW87, verify the DC adapter connection if used.
- No Internet Connection:
- Verify that your main router or modem is working correctly.
- Check the Ethernet cable connection between the PoE adapter (LAN port) and your router/switch.
- Ensure the AP's WAN port is correctly configured in its web interface.
- Weak WiFi Signal or Slow Speed:
- Ensure the AP is mounted in an optimal location, free from physical obstructions.
- Check for sources of interference (e.g., other wireless devices, large metal objects).
- Verify antenna connections (if detachable).
- Consider adjusting the transmit power settings in the web interface (if available).
- Cannot Access Web Management Interface:
- Ensure your computer is connected to the AP's network (either wirelessly or via Ethernet).
- Verify the IP address of the AP. Try the default IP (e.g., 192.168.1.1).
- Temporarily disable any firewall or antivirus software on your computer.
- If all else fails, perform a factory reset (see below).
- Factory Reset:
To restore the device to its factory default settings, locate the Reset button (usually a small pinhole). With the device powered on, press and hold the Reset button for approximately 5-10 seconds until the LED indicators change, then release. The device will reboot with default settings.
8. User Tips
- Optimal Placement: For best outdoor coverage, mount the AP as high as possible and with a clear line of sight to the areas you want to cover.
- Antenna Orientation (for models with adjustable antennas): Experiment with antenna angles to optimize signal strength and coverage in your specific environment.
- Security: Always change the default administrator password and WiFi password immediately after initial setup. Use WPA2/WPA3 encryption for your wireless network.
- Network Segmentation: If your device supports multiple SSIDs or VLANs, consider creating a separate guest network for visitors to enhance security.
- WPS Functionality: If your device supports WPS (Wi-Fi Protected Setup), you can use it for quick and easy connection of WPS-compatible devices to your network. Refer to your device's web interface for WPS activation.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact Comfast customer support directly. Keep your purchase receipt and product serial number handy for faster service.
