KOPUO Car Jump Starter Power Bank User Manual

1. Introduction

This manual provides essential information for the safe and effective operation and maintenance of your KOPUO Car Jump Starter Power Bank. Please read this manual thoroughly before use and keep it for future reference.

The KOPUO Car Jump Starter Power Bank is a versatile device designed to restart 12V vehicles with dead batteries (up to 5.0L gas/4.0L diesel engines) and serve as a portable power bank for charging electronic devices. It also features an integrated LED flashlight with multiple modes for emergency situations.

2. Important Safety Information

Failure to follow these safety instructions may result in electric shock, fire, or serious injury.

• Always confirm the electric quantity indicator is above 75% before attempting to jump start a vehicle.
• Ensure the battery clip's blue plug is firmly inserted into the host's corresponding space. Improper connection can affect performance and damage the plastic joint.
• Connect the RED clamp to the vehicle battery's POSITIVE (+) terminal and the BLACK clamp to the NEGATIVE (-) terminal. NEVER reverse polarity, as this may cause danger.
• Do NOT attempt more than 5 consecutive starts. If the vehicle fails to ignite, wait 30 seconds between attempts to prevent overheating.
• If the car cannot be started, check if the battery clamps are securely attached and if the battery terminals are free from rust or dirt. Clean if necessary before reattempting.
• Do NOT force start if the vehicle consistently fails to start after 3 attempts, as this may damage the product. The vehicle should be further examined for other faults.
• Do NOT clip the two ends of the clamps together, as this may cause safety accidents.
• Remove the jump starter unit within 30 seconds after the car starts to prevent safety accidents.
• Do NOT disassemble the machine yourself. Self-dismantling may cause safety accidents and will void the warranty.

3. Product Overview

3.1 Package Contents

Upon unpacking, please ensure all items are present and in good condition:

• KOPUO Car Jump Starter Power Bank
• Smart Jumper Clamps (Red and Black)
• USB Charging Cable (Type-C input)
• User Manual (this document)

3.2 Device Components

3.3 Key Features

• Peak Current: >1200 A (up to 2000A for specific models)
• Starting Voltage: 12V
• Engine Compatibility: Up to 5.0L Gas / 4.0L Diesel engines
• Battery Capacity: 5000 - 8000 mAh (internal, not user-replaceable)
• Fast Charge: Two-Way Fast Charge
• Input: 5V/2A (Type-C)
• Output: 5V/2A (USB), 12V (Jump Start)
• Special Features: USB, Lighting, Warning Light, SOS Lighting
• Operating Temperature: -20℃ to 60℃
• Cycle Life: ≥1000 times
• Safety Protections: Over Charge, Low Voltage, Reverse Polarity, High-Temperature, Short Circuit, Low-Temperature, Over Load, Over Discharge, Spark Proof, Over Current.

3.4 Safety Features (Smart Clamps Protection)

The KOPUO Car Jump Starter is equipped with smart clamps that provide comprehensive protection during operation:

• Over Charge Protection
• Low Voltage Protection
• Reverse Polarity Protection
• High-Temperature Protection
• Short Circuit Protection
• Low-Temperature Protection
• Over Load Protection
• Over Discharge Protection
• Spark Proof Protection
• Over Current Protection

4. Setup and Charging

4.1 Initial Charge

Before first use, fully charge the KOPUO Car Jump Starter. Connect the provided USB charging cable to the Type-C input port on the device and to a suitable 5V/2A USB power adapter (not included). The digital display will show the charging progress. Ensure the device is fully charged before storing or using for jump starting.

4.2 Maintaining Charge

To maintain optimal performance and extend battery life, recharge the jump starter every 3 months, especially if not in regular use. Ensure the battery level is at least 60% before each jump start attempt.

5. Operating Instructions

5.1 Jump Starting a Vehicle

Follow these steps carefully to jump start your vehicle:

1. Check Battery Level: Ensure the jump starter's power display shows above 75% charge.
2. Connect Clamps to Jump Starter: Firmly plug the blue end of the smart jumper clamps into the corresponding anti-reverse interface on the jump starter. The indicator light on the smart clamps should turn green, indicating it's ready. If it turns red with buzzing, check connections.
3. Connect Clamps to Car Battery:
   • Connect the RED (+) clamp to the positive (+) terminal of the vehicle's dead battery.
   • Connect the BLACK (-) clamp to the negative (-) terminal of the vehicle's dead battery.

   WARNING: Do NOT reverse polarity. Ensure clamps do not touch each other.

4. Start the Vehicle: Enter the vehicle and start the engine within 30 seconds.
5. Remove Jump Starter: Once the vehicle starts, immediately remove the smart jumper clamps from the jump starter unit within 30 seconds.
6. Disconnect Clamps from Car Battery: First, remove the BLACK (-) clamp from the negative terminal, then remove the RED (+) clamp from the positive terminal.

5.2 Using as a Portable Power Bank

The KOPUO Car Jump Starter can also charge your electronic devices via its USB output port (5V/2A).

1. Connect your device's USB charging cable to the USB output port on the jump starter.
2. The jump starter will automatically begin charging your device.

5.3 LED Flashlight Functions

The integrated LED flashlight offers multiple modes for various situations:

1. Turn On/Off: Press and hold the function button to turn the flashlight on or off.
2. Switch Modes: Once the flashlight is on, short press the function button to cycle through modes:
   • Lighting: Standard bright illumination.
   • Strobe: Rapid flashing for signaling or attracting attention.
   • SOS: International Morse code signal for emergencies.

6. Maintenance and Storage

• Regular Recharging: If not in use, recharge the jump starter every 3 months to maintain optimal battery health.
• Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the jump starter in a cool, dry place, away from direct sunlight, heat sources, and moisture. Keep out of reach of children.
• Terminal Care: Ensure the smart clamps and battery terminals are clean and free of rust or dirt for effective connection.

7. Troubleshooting

7.1 Vehicle Fails to Start

• Low Battery: Confirm the jump starter's power display is above 75%. Recharge if necessary.
• Improper Connection: Ensure the blue plug of the smart clamps is fully inserted into the jump starter. Check that the RED (+) clamp is on the positive (+) terminal and the BLACK (-) clamp is on the negative (-) terminal of the car battery. Correct any reversed polarity or loose connections.
• Corroded Terminals: Clean any rust or dirt from the vehicle's battery terminals and the smart clamps.
• Over-attempting: If the vehicle does not start after one attempt, wait 30 seconds before trying again. Do not exceed 3 consecutive attempts. Continuous attempts can damage the jump starter.
• Vehicle Fault: If the vehicle still fails to start after following all instructions, there might be another issue with the vehicle itself. Consult a mechanic.

7.2 Device Not Charging

• Cable Check: Ensure the Type-C charging cable is securely connected to both the jump starter and the power adapter.
• Power Adapter: Verify that the USB power adapter is functioning correctly and provides 5V/2A output.

8. Technical Specifications

Note: Specifications are subject to change without notice. The 5000A peak current mentioned in some images may refer to a different model variant; this manual focuses on the 2000A model.

9. User Tips

• Keep the jump starter charged and ready in your vehicle for unexpected emergencies.
• Familiarize yourself with the connection points on your car battery before an emergency arises.
• The LED flashlight is very bright; avoid shining it directly into eyes.

10. Warranty and Support

This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact the seller for specific warranty terms and conditions.

Important: Any unauthorized disassembly or modification of the device will void the product warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact KOPUO customer service through your purchase platform.

A PDF version of the user manual is available for download: KOPUO Car Jump Starter User Manual (PDF)