1. Introduction
Thank you for choosing the Skydroid G12 Remote Control. This advanced remote control system is designed for professional drone and RC vehicle applications, offering reliable dual-band communication, a high-definition display, and extended range digital image transmission. This manual will guide you through the proper setup, operation, and maintenance of your G12 remote control to ensure optimal performance and longevity.
2. Product Overview
2.1 Key Features
- Dual-Band Operation: Supports both 2.4GHz and 5.8GHz frequencies for stable and interference-free communication.
- High-Definition Display: Integrated 5.5-inch 1080P screen with 1000nit brightness for clear visibility even in bright conditions.
- Extended Range: Capable of up to 20KM digital image transmission.
- Android Platform: Runs on a Qualcomm Android system, offering versatility and potential for custom applications.
- Long Battery Life: Equipped with a 10000mAh battery for extended operating times.
- Multiple Interfaces: Includes Type-C charging, HDMI output, USB port, Micro SD card slot, and SIM card slot.
2.2 Components
The Skydroid G12 Remote Control package typically includes the following components:


- Skydroid G12 Remote Control Unit
- Antennas (2x)
- Cooling Fan (for receiver, if included in package)
- Connection Cables
- USB Type-C Charging Cable (not explicitly shown but implied by Type-C port)
3. Setup
3.1 Initial Charging
Before first use, fully charge the G12 remote control. Connect the provided USB Type-C cable to the charging port on the remote control and a suitable USB power adapter (not included). The charging indicator will show the charging status.
3.2 Antenna Installation
Carefully screw the two antennas onto the designated ports at the top of the remote control. Ensure they are securely fastened but do not overtighten.

3.3 Powering On/Off
- To Power On: Press and hold the power button (usually located centrally on the control panel) until the screen illuminates.
- To Power Off: Press and hold the power button until a power-off prompt appears on the screen, then confirm.
3.4 Connecting to Receiver (G12R)
Refer to the specific instructions for your G12R receiver and flight controller (e.g., Pixhawk, APM, DJI) for detailed wiring and binding procedures. Generally, this involves:
- Ensure both the G12 remote control and the G12R receiver are powered off.
- Connect the G12R receiver to your flight controller according to its wiring diagram.
- Power on the G12 remote control.
- Initiate the binding process on both the remote control and the receiver as per their respective manuals.
- Verify successful connection through the remote control's display or indicator lights on the receiver.
4. Operating Instructions
4.1 Basic Controls
The G12 features standard joystick controls for flight maneuvers and several programmable buttons (A, B, C, D) for various functions. Familiarize yourself with the layout:
- Joysticks: Control pitch, roll, yaw, and throttle.
- Buttons A, B, C, D: Typically used for mode switching, camera control, or other custom functions. Refer to your flight controller's configuration for specific assignments.
4.2 Display Usage
The 5.5-inch 1080P Android display provides real-time telemetry, video feed, and access to system settings. Navigate the Android interface using touch gestures. You can install compatible applications for enhanced functionality.
4.3 Image Transmission
The G12 supports digital image transmission up to 20KM. Ensure your camera (e.g., G12C) and receiver are properly connected and configured to receive the video feed on the G12's display.
4.4 Frequency Selection
The G12 automatically selects the optimal frequency (2.4GHz or 5.8GHz) based on environmental conditions. You may be able to manually select or prioritize a band through the system settings if needed, especially in areas with high interference.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control's exterior and display. Avoid using harsh chemicals or abrasive materials.
- Battery Care: To prolong battery life, avoid fully discharging the 10000mAh battery frequently. Store the remote control with a partial charge (around 50-60%) if not used for extended periods.
- Storage: Store the G12 in a cool, dry place away from direct sunlight and extreme temperatures. Use a protective case to prevent physical damage.
- Software Updates: Periodically check for firmware and software updates for the Android system to ensure optimal performance and access to new features.
6. Troubleshooting
If you encounter issues with your Skydroid G12, refer to the following common problems and solutions:
- No Power: Ensure the battery is charged. Connect the Type-C charger and check if the charging indicator lights up.
- No Signal/Connection Issues:
- Verify that antennas are securely attached.
- Ensure the receiver (G12R) is correctly wired and powered.
- Check that both the remote control and receiver are powered on and in binding mode if necessary.
- Ensure you are within the operational range (20KM).
- Check for potential interference from other 2.4GHz or 5.8GHz devices.
- No Video Feed on Display:
- Confirm the camera (e.g., G12C) is properly connected to the receiver and powered.
- Check camera settings and ensure video output is enabled.
- Verify the receiver is correctly linked to the remote control.
- Display Not Responding: Try restarting the remote control. If the issue persists, a factory reset might be necessary (consult Skydroid support for this procedure).
- Android System Issues: If the Android operating system becomes unresponsive or buggy, try restarting the device. Ensure you have the latest software updates installed.
For persistent issues not covered here, please contact Skydroid customer support.
7. Specifications

| Component | Attribute | Value |
|---|---|---|
| Remote Control (G12) | Frequency | 2.400-2.483GHz / 5.725-5.850GHz |
| Channels | 12 | |
| Transmission Distance | 20KM (ground), 20KM (air) | |
| Screen | 5.5 inch, 1080P, 1000nit | |
| Battery | 10000mAh | |
| Weight | 680g | |
| Dimensions | 183x100x54mm | |
| Operating System | Android | |
| Receiver (G12R) | Frequency | 2.400-2.483GHz / 5.725-5.850GHz |
| Channels | 12 | |
| Transmission Distance | 20KM (ground), 20KM (air) | |
| Power Supply | 4.5-5.5V | |
| Weight | 38g | |
| Dimensions | 78x40x10mm | |
| Camera (G12C - Compatible) | Sensor | 1/2.9 inch CMOS |
| Resolution | 1920x1080 | |
| Lens | 3.6mm | |
| Power Supply | 5V | |
| Weight | 15g |
7.1 Additional Product Properties
- Model Number: G12
- For Vehicle Type: Airplanes
- Material: Composite Material
- Origin: Mainland China
- Recommend Age: 14+y
- Use: Vehicles & Remote Control Toys
- Is Electric: Other Battery
- Is Batteries Included: No
- Quantity: 1 pcs
- High-concerned chemical: None
- Is it battery/power supply: N
- Is it charger/adapter: N
8. User Tips
- Optimal Antenna Placement: Always ensure your antennas are positioned correctly and unobstructed for the best signal strength and range.
- Regular Software Checks: Given the Android platform, regularly check for system and application updates to benefit from performance improvements and new features.
- Screen Protection: Consider a screen protector for the 5.5-inch display to prevent scratches during field use.
9. Warranty and Support
The Skydroid G12 Remote Control is designed for durability and performance. For any warranty claims or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. For general inquiries or assistance, you may also refer to the official Skydroid website or community forums.