ASMAX Z1 Bluetooth Motorcycle Intercom User Manual

1. Introduction

Thank you for choosing the ASMAX Z1 voice-controlled helmet Bluetooth intercom. This device offers advanced features such as 10-rider mesh intercom, AI voice control, dual-chip Bluetooth 5.3, audio multitasking, and fast charging. Please read this guide carefully before using the device to ensure proper operation and maximize your riding experience.

For a more detailed guide, you can refer to the full user manual in PDF format: ASMAX Z1 User Manual (PDF)

2. Package Contents

The ASMAX Z1 package includes the following items:

Image: All components included in the ASMAX Z1 package.

• Z1 Main Unit
• Magnet Mount
• Speaker Unit
• 3M Glue Plate
• Metal Clamp
• Hybrid Microphone
• Wired Microphone
• Type-C Cable
• Clean Pack
• Speaker Pads
• Velcro for Speaker
• Velcro for Wired Mic
• Velcro for Hybrid Mic
• Microphone Sponge
• Spare 3M
• Manual (Quick Start Guide)

3. Setup and Installation

Follow these steps to install your ASMAX Z1 intercom on your helmet:

1. Prepare the Main Unit and Mount: Attach the Z1 Main Unit to the Magnet Mount.

   

   Image: Z1 Main Unit connected to the Magnet Mount.

2. Attach Mount to Helmet: Secure the Magnet Mount to the side of your helmet using either the 3M Glue Plate or the Metal Clamp. Ensure a firm attachment.

   

   Image: Magnet Mount attached to the helmet.

3. Install Speakers: Place the speaker units inside the helmet's ear pockets. Use the provided Velcro pads to secure them. Ensure they are positioned comfortably over your ears.

   

   Image: Speakers being placed inside the helmet.

4. Connect Microphone: Choose between the Hybrid Microphone (boom mic) or the Wired Microphone (button mic) based on your helmet type (full-face or open-face). Connect it to the main unit.

   

   Image: Microphone connected to the main unit.

5. Route Cables: Carefully route all cables (speakers and microphone) within the helmet lining to avoid interference and ensure comfort. Connect them to the Z1 Main Unit.

   

   Image: Internal wiring of the Z1 unit within the helmet.

4. Basic Operations

Image: Overview of the ASMAX Z1 main unit with labeled buttons and LED indicators.

4.1 Power On/Off

• Power On: Press and hold the Function Button for 2 seconds.
• Power Off: Press and hold the Function Button for 2 seconds.

4.2 Volume Control

• Voice Command: Say "Hi Max, volume up" to increase volume, or "Hi Max, volume down" to decrease volume.
• Button Control: Tap the Volume + button to increase volume, or the Volume - button to decrease volume.

4.3 LED Indicators

The LED indicator on the Intercom Button and Function Button provides status information:

• Blue: Bluetooth connected / Intercom active
• Red: Charging / Low battery
• Green: Fully charged
• Flashing Red/Blue: Pairing mode

4.4 Charging

The ASMAX Z1 features a Type-C charging port and a 1050mAh battery with fast charging. A full charge takes approximately 42 minutes, providing up to 14 hours of talk time or 17 hours of music time.

• Connect the provided Type-C cable to the charging port on the main unit and a suitable USB power source.
• Note: Do not use a charger with an output voltage exceeding 15V.

5. Phone and GPS Pairing

Connect your ASMAX Z1 to your smartphone or GPS device for calls, music, and navigation.

Image: Voice control for phone pairing and navigation.

5.1 Voice Command Pairing

• Say "Hi Max, phone pairing" to initiate pairing mode.

5.2 Button Control Pairing

• In standby mode, press and hold the Function Button for 1 second until the LED indicator flashes red and blue.
• On your smartphone or GPS device, go to Bluetooth settings and search for "ASMAX Z1".
• Select "ASMAX Z1" to connect. The LED will turn blue when successfully paired.

6. Phone Calls

Manage your phone calls hands-free while riding.

Image: Visual representation of answering a call with the ASMAX Z1.

6.1 Answering Calls

• Voice Command: Say "Hi Max, answer the phone".
• Button Control: Tap any button once.

6.2 Ending Calls

• Voice Command: Say "Hi Max, hang up".
• Button Control: Tap the Function Button once.

6.3 Rejecting Calls

• Button Control: Press and hold the Function Button for 3 seconds.

7. Music Control

Enjoy your favorite music on the go.

Image: ASMAX Z1 supporting music streaming, intercom, and GPS navigation.

7.1 Play/Pause Music

• Voice Command: Say "Hi Max, music on" to play, or "Hi Max, pause music" to pause.
• Button Control: Tap the Function Button once.

7.2 Previous/Next Track

• Voice Command: Say "Hi Max, previous track" or "Hi Max, next track".
• Button Control: Hold the Volume - button for 2 seconds for the previous track. Hold the Volume + button for 2 seconds for the next track.

8. Intercom Modes

The ASMAX Z1 supports various intercom modes for group communication.

Image: Mesh Group Intercom supporting up to 10 riders with a maximum range of 3 km (1.86 mi) without obstacles.

8.1 Group Mesh

Connect effortlessly with up to 10 riders for seamless communication up to 1.8 km.

• Voice Command: Say "Hi Max, group mesh".
• Button Control: Press and hold the Intercom Button for 2 seconds.

8.2 Group Mode

For private conversations within a group mesh.

• Voice Command: Say "Hi Max, group mode".
• Button Control: Tap the Intercom Button once after forming a group mesh.

8.3 Free Mode

For quick start talk with any member within range.

• Voice Command: Say "Hi Max, free mode".
• Button Control: Tap the Intercom Button once.

8.4 Universal Mode

Allows pairing with other brands of intercoms.

• Enter Pairing: Press and hold the Intercom Button for 3 seconds.
• Other Brand Intercom: Follow the instructions of the other brand's intercom to enter pairing mode.
• Start Intercom: Once paired, tap the Intercom Button twice to start communication.

8.5 End Intercom

• Voice Command: Say "Hi Max, end intercom".
• Button Control: Tap the Intercom Button once.

9. Voice Commands

The ASMAX Z1 supports the following voice commands by saying "Hi Max" followed by the command:

• "volume up"
• "volume down"
• "phone pairing"
• "answer the phone"
• "hang up"
• "music on"
• "pause music"
• "previous track"
• "next track"
• "group mesh"
• "group mode"
• "free mode"
• "end intercom"

10. Specifications

Image: Dual-Chip Octa-Core architecture for stable connection and high-quality audio.

11. Firmware Update

To ensure optimal performance and access to the latest features, it is recommended to keep your ASMAX Z1 firmware updated. Updates are managed through the ASMAX WORLD mobile application.

Image: The ASMAX WORLD app interface for managing devices and updates.

1. Download the App: Scan the QR code in the Quick Start Guide (page 4) or search for "ASMAX WORLD" on Google Play Store or Apple App Store.
2. Register/Connect: Open the app and register an account. Follow the in-app instructions to connect your ASMAX Z1 unit.
3. Check for Updates: Navigate to the "Update your unit" section within the app.
4. Install Update: If a new firmware version is available, follow the prompts to download and install it. Ensure your device has sufficient battery before starting the update.

12. Factory Reset

If you encounter persistent issues or wish to clear all settings, you can perform a factory reset.

• Button Control: While the device is powered on, press and hold the Function Button and the Volume - button simultaneously for 2 seconds. The device will indicate a reset and power off.

13. Troubleshooting

Here are some common issues and their solutions:

• Device won't power on: Ensure the battery is charged. Connect to a power source using the Type-C cable.
• Cannot pair with phone/GPS: Make sure the ASMAX Z1 is in pairing mode (LED flashing red/blue). Check your phone/GPS Bluetooth settings and ensure it's discoverable. Try restarting both devices.
• Poor audio quality/Noise: Verify that the speakers are correctly positioned over your ears and the microphone is close to your mouth. The Intelligent ENC/DSP Noise Cancellation should minimize environmental noise, even at speeds up to 160km/h.
• Intercom range issues: Ensure there are no significant obstacles between riders. For optimal range, maintain a clear line of sight.
• Voice commands not responding: Ensure you are saying "Hi Max" clearly before the command. Check if the device is connected to the ASMAX app and has internet access for online voice commands. Offline commands are also available.
• Intermittent connection: Ensure your firmware is up to date via the ASMAX WORLD app.

14. User Tips

• Optimal Speaker Placement: For the best audio experience and noise reduction, ensure the speakers are centered over your ears inside the helmet.
• Voice Command Clarity: Speak clearly and at a moderate volume when using voice commands. The AI voice control is designed to work well even with helmet noise.
• Firmware Updates: Regularly check the ASMAX WORLD app for firmware updates. These updates often include performance improvements and new features.
• Magnetic Mount Security: Always double-check that the main unit is securely attached to the magnetic base before riding.

15. Warranty and Support

The ASMAX Z1 comes with a 2-year warranty and lifetime technical support.

For any technical assistance or inquiries, please contact ASMAX customer service:

• Customer Service Email: support@asmaxworld.com