FDIK T6

Contents

FDIK 8KW Diesel Air Parking Heater T6 User Manual

Model: T6 | Brand: FDIK

1. Introduction

Thank you for choosing the FDIK 8KW Diesel Air Parking Heater T6. This portable heater is designed to provide efficient and reliable heating for various applications, including houses, cabins, camping setups, RVs, boats, and trucks. Featuring multi-voltage compatibility (12V, 24V, 220V), a low-noise pump, and smart control options via app and Bluetooth, the T6 model ensures comfort in cold environments.

This manual provides essential information for the safe and effective operation, installation, and maintenance of your heater. Please read it thoroughly before use and keep it for future reference.

FDIK 8KW Diesel Air Parking Heater T6 with 12V, 24V, and 220V power options
Figure 1: FDIK 8KW Diesel Air Parking Heater T6

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the heater:

  • Ensure proper ventilation when operating the heater, especially in enclosed spaces, to prevent carbon monoxide buildup.
  • Do not block the air inlet or outlet. Maintain clear space around the heater for optimal airflow.
  • Use only diesel fuel. Do not use gasoline or other volatile fuels.
  • Keep flammable materials away from the heater.
  • Ensure the heater is placed on a stable, non-flammable surface.
  • Do not touch hot surfaces of the heater during or immediately after operation.
  • Disconnect power before performing any maintenance or cleaning.
  • Children and pets should be kept at a safe distance from the heater.
  • If using the 220V adapter, ensure it is properly connected and the power source is stable.

3. Package Contents

Upon unpacking, please verify that all components are present:

Diagram showing all components included with the FDIK 8KW Diesel Air Parking Heater T6
Figure 2: Included Components
  • FDIK 8KW Diesel Air Parking Heater T6 Unit
  • Remote Control
  • Control Panel (integrated)
  • Clamps (various sizes)
  • Mounting Screws
  • Exhaust Pipe
  • Air Duct
  • Muffler
  • User Manual
  • 220V Adapter (for AC power)

4. Specifications

FeatureSpecification
Brand NameFDIK
ModelT6
TypeCombustion Type Heater (Air Heating)
Voltage12V / 24V / 220V
Power8KW
FuelDiesel
Fuel Tank Capacity3.5 Liters (approx.)
Fuel Consumption0.15-0.55 L/H (depending on temperature/power)
Heating SpaceUp to 20 m²
Shell MaterialMetal
Switch TypeLCD Color Screen
Working Temperature-40°C to 40°C
Dimensions (approx.)365mm (Length) x 250mm (Width) x 260mm (Height)
Special FeaturesAir heating, Low noise pump, App control, Bluetooth, Remote control, Timer start, Temperature mode
Diagram showing dimensions and key specifications of the FDIK Air Heater
Figure 3: Product Dimensions and Key Specifications

5. Setup and Installation

The FDIK T6 heater is designed for portable use but can also be semi-permanently installed. Follow these steps for initial setup:

5.1 Fuel Connection

  • Fill the integrated 3.5L fuel tank with clean diesel fuel. Ensure the cap is securely fastened.
  • The heater uses a high-quality silent oil pump for efficient fuel delivery.

5.2 Power Connection

The heater supports 12V, 24V, and 220V power inputs.

  • For 12V/24V DC: Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of your vehicle's battery or a suitable DC power source. Ensure the power source matches the heater's voltage requirement (12V or 24V).
  • For 220V AC: Use the provided 220V adapter. Connect the heater's DC input to the adapter, then plug the adapter into a standard 220V AC wall outlet.
Image showing the 220V adapter connected to the FDIK heater and a wall outlet
Figure 4: Connecting the 220V Adapter

5.3 Exhaust and Air Duct Installation

  • Attach the exhaust pipe to the heater's exhaust port and secure it with the provided clamps. Ensure the exhaust is directed safely away from any combustible materials and living spaces.
  • Connect the air duct to the hot air outlet. This duct can be directed to the area requiring heat.
  • Install the muffler on the exhaust pipe to reduce noise.

5.4 Internal Components Overview

Exploded view diagram of the FDIK heater showing internal components like combustion chamber, glow plug, and fan
Figure 5: Internal Components Diagram

The heater's internal structure includes a heating zone, overheat protection device, flame retardant impeller, control box, air fan, glow plug, combustion chamber (aluminum body), and motor assembly. The aluminum combustion chamber ensures efficient heat transfer.

6. Operation

6.1 Control Panel Functions

Detailed view of the FDIK heater control panel with labeled buttons and display
Figure 6: Control Panel Overview
  • Power Switch Setting: Turns the heater ON/OFF.
  • Function Mode Setting: Cycles through various operating modes (e.g., power mode, temperature mode).
  • Adjust Temperature/Power: Use the rotary knob to set the desired temperature or heating power level.
  • Display: Shows current temperature, power, timer settings, and status indicators (e.g., Bluetooth, remote control).

6.2 Starting the Heater

  1. Ensure the fuel tank is filled and power is connected.
  2. Press the Power Switch button on the control panel to turn on the heater.
  3. The heater will initiate a startup sequence, including pre-heating the glow plug.
  4. Once started, the fan will begin to blow warm air.
  5. Adjust the temperature or power using the rotary knob to your desired setting.

6.3 Heating Principle

Diagram illustrating the heating principle of the FDIK diesel heater, showing air intake, combustion, and hot air output
Figure 7: Heating Principle Demonstration

Cold air enters through the air inlet, passes through the heated aluminum combustion chamber where diesel fuel is burned, and the air is heated. The motor drives a fan to suck in cold air and blow out hot air from the air outlet, providing warmth.

6.4 Remote Control Operation

Image showing the remote control for the FDIK heater in a snowy outdoor setting
Figure 8: Remote Control Usage

The heater can be controlled remotely. Under barrier-free conditions, the maximum remote control distance is approximately 30 meters. Use the ON/OFF buttons and temperature adjustment buttons (+/-) on the remote to operate the heater.

6.5 App and Bluetooth Control

The FDIK T6 heater supports app control via Bluetooth. Refer to the specific instructions provided with the heater for downloading and pairing the mobile application. This allows for convenient control and monitoring of the heater from your smartphone.

6.6 Timer Function

Utilize the timer function on the control panel to schedule the heater's operation. This allows you to pre-set start times for heating.

7. Maintenance

Regular maintenance ensures the longevity and efficient operation of your FDIK T6 heater.

  • Cleaning: Periodically clean the exterior of the heater with a soft, damp cloth. Ensure the air inlet and outlet are free from dust and debris.
  • Fuel Filter: Check and clean or replace the fuel filter as needed to prevent blockages and ensure clean fuel delivery.
  • Glow Plug: The glow plug is a critical component for ignition. If ignition issues occur, inspect the glow plug for carbon buildup or damage. Replacement may be necessary.
  • Exhaust System: Inspect the exhaust pipe and muffler for any blockages or damage. Ensure proper ventilation.
  • General Inspection: Regularly check all connections, wires, and hoses for wear, damage, or leaks.

Always disconnect power before performing any maintenance.

8. Troubleshooting

If you encounter issues with your heater, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Heater does not startNo power, low fuel, faulty glow plug, blocked fuel line.Check power connection and voltage. Ensure sufficient fuel. Inspect glow plug. Check fuel lines for blockages.
No heat or insufficient heatIncorrect temperature setting, blocked air intake/outlet, low fuel, combustion issue.Adjust temperature/power. Clear obstructions from air paths. Refill fuel. Check for error codes on display.
Excessive smokePoor fuel quality, incorrect fuel-air mixture, blocked exhaust.Use clean diesel. Check air filter. Clear exhaust pipe.
Unusual noiseLoose components, fan obstruction, pump issue.Inspect for loose parts. Clear fan area. If pump noise is excessive, contact support.
Remote control not workingDead batteries, out of range, signal obstruction.Replace remote batteries. Move closer to the heater. Ensure no physical barriers.

If the problem persists after attempting these solutions, please contact FDIK customer support.

9. User Tips

  • Display Control: If you wish to turn off the display while the heater is running, check the control panel settings for a display dimming or off option. Some models may have this feature accessible through the function mode settings.
  • Glow Plug Maintenance: Users have inquired about replacement glow plugs. It is recommended to use genuine FDIK spare parts for optimal performance and compatibility. Contact FDIK support for specific part numbers for the 8KW model.
  • Aluminum Housing: The FDIK T6 unit features an aluminum combustion chamber, which is a key component for efficient heat transfer and durability.
  • Pre-heating: Allow the heater a few minutes to pre-heat and reach optimal operating temperature, especially in very cold conditions.
  • Fuel Quality: Always use high-quality, clean diesel fuel to prevent clogging and ensure efficient combustion.

10. Warranty and Support

FDIK products are manufactured to high-quality standards. For warranty information, technical support, or spare parts inquiries, please refer to the contact details provided on the FDIK official website or your purchase documentation.

Please have your product model (T6) and purchase date ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.