1. Introduction
The SmallRig VT-20Pro Portable Desktop Aluminum Alloy Tripod 5470 is engineered for versatility in photography, videography, and live streaming. Its compact design and robust construction make it an ideal companion for creators on the go. This tripod features a 1/4"-20 screw at the top for camera attachment and accessory expansion, with a 3/8"-16 screw on the head base for broad compatibility. It offers an adjustable working height and a high load capacity for various equipment.
2. Package Contents
Verify that all the following items are included in your package:
- Tripod x 1
- Phone Clamp x 1
- Guarantee Card x 1
- Carrying Bag x 1
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | 5470 |
| Material(s) | Aluminum Alloy, ABS |
| Tripod Load Capacity | 5.0kg / 11.0lb |
| Head Load Capacity | 3.0kg / 6.6lb |
| Maximum Height | 53.8cm / 21.2in |
| Storage Length | 23cm / 9.06in |
| Maximum Leg Diameter | 23.5mm / 0.9in |
| Sections | 5 |
| Product Weight | 620.0 ± 5.0g / 1.37lb |
| Product Dimensions | 66.0 x 75.0 x 215.0mm / 2.6 x 3.0 x 8.5in |
| Package Dimensions | 82.0 x 82.0 x 225.0mm / 3.2 x 3.2 x 8.9in |
| Package Weight | 0.734kg / 1.61lb |
| Unique Center Column Design | Enables compact storage for easy transport |
| Eccentric Tube Mechanism | Deploys in just one twist for rapid setup |
4. Setup Instructions
- **Extend the Legs**: Rotate the leg locking knob clockwise to unlock the leg sections.
- **Adjust Height**: Pull the leg sections outwards to extend them to your desired height.
- **Lock the Legs**: Rotate the leg locking knob counter-clockwise to securely lock the leg sections in place.
- **Attach Equipment**: Mount your camera, phone clamp, or other compatible equipment onto the 1/4"-20 screw at the top of the tripod head.
- **Secure Head**: Ensure that the head and legs are firmly locked in place before use to prevent accidental movement or damage to your equipment.
5. Operating Instructions
5.1 Angle Adjustment
The tripod features a 3-stop angle adjustment mechanism, allowing for quick changes between three preset angles: 23°, 50°, and 80°. Use the quick angle adjustment lever to select the desired spread for the tripod legs.
5.2 Compatibility
The tripod leg base is compatible with ball heads, video heads, or stabilizers that feature 3/8"-16 threaded holes. The included ball head is designed to fit DSLRs, mirrorless cameras, or cages with 1/4"-20 threaded holes. A smartphone mount is also included for mobile devices.
Important Note: Avoid using lenses with a focal length greater than 50mm to ensure stability and prevent potential damage.
5.3 Usage Scenarios
The VT-20Pro tripod is suitable for a variety of shooting environments and applications, including:
- Photography (e.g., product shots, low-angle shots)
- Videography (e.g., stable video recording)
- Live Streaming (e.g., desktop setup for vlogging or online meetings)
- Tabletop use for compact setups
6. Maintenance
- **Cleaning**: Use a soft, dry cloth to clean the tripod. For stubborn dirt, a slightly damp cloth can be used, followed by thorough drying.
- **Environmental Protection**: Avoid using the tripod in sandy, dusty, or excessively humid environments to prevent damage to moving parts and materials.
- **Moisture Exposure**: If the tripod is exposed to water, dry it thoroughly before storing to prevent corrosion.
- **Storage**: Store the tripod in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tripod is unstable or collapses | Leg sections or head not properly locked. Overloaded beyond capacity. | Ensure all leg locking knobs are tightened. Verify the head is securely attached. Check that the total weight of your equipment (camera, lens, accessories) does not exceed the head's (3.0kg / 6.6lb) or tripod's (5.0kg / 11.0lb) load capacity. |
| Legs are difficult to extend or retract | Dirt, sand, or debris in leg mechanisms. | Clean the leg sections and locking mechanisms thoroughly. Avoid using in sandy or dusty environments. |
| Camera/accessory does not fit the mounting screw | Incorrect screw size. | The tripod head uses a 1/4"-20 screw. The tripod base for external heads uses a 3/8"-16 screw. Ensure your equipment matches these thread sizes. |
| Image quality issues (e.g., blur, instability) | Using a lens with focal length > 50mm. | For optimal stability, avoid using lenses with a focal length greater than 50mm. |
8. User Tips
No specific user tips were available from reviews or Q&A for this product. Always refer to the setup and operating instructions for best results.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official SmallRig website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
