1. Introduction
The LEEDOAR W600 Smart Glasses are innovative eyewear designed to seamlessly integrate technology into your daily life. Featuring a 5MP camera for photo and 720p HD video recording, intelligent audio recording, AI translation capabilities, Bluetooth calling, and local music playback, these glasses offer a hands-free experience for capturing moments, staying connected, and accessing information. Built with a lightweight design and IP65 dust and water resistance, they are suitable for various environments and activities. Control is intuitive, combining physical buttons, touch controls, and a dedicated mobile application.


2. Setup
2.1 Package Contents
- W600 Smart Glasses
- Glasses Storage Case
- Charging Cable (Magnetic)
- User Manual
- Packaging Box
2.2 App Installation
To unlock the full potential of your W600 Smart Glasses, download and install the LensMoo application on your mobile device. The app is available for both iOS and Android platforms. Search for "LensMoo" in your device's app store.
2.3 Powering On/Off
- Power On: Long press the front physical button for 3 seconds.
- Power Off: Long press the front physical button for 3 seconds.
2.4 Bluetooth Pairing
Ensure your glasses are powered on and your mobile device's Bluetooth is enabled. Open the LensMoo app and follow the on-screen instructions to pair your glasses. For smart pairing or to unpair connected devices, triple-press the rear physical button on the glasses.
3. Operating Instructions
The W600 Smart Glasses feature a combination of physical buttons and touch controls for various functions. Refer to the diagram below for button locations and their corresponding actions.

3.1 Camera Functions (Photo & Video)
- Take Photos: Single-press the front physical button.
- Record Videos: Double-press the front physical button to start recording. Single-press again to stop and save.
- HD Output: The camera supports 720p HD video output.
- Photo Transfer: Photos and videos taken by the glasses can be quickly transferred via Bluetooth to the LensMoo mobile app for display and storage.


3.2 Audio Recording
- Start Recording: In a Bluetooth-connected state, single-press the front physical button to record audio.
- Stop/Save Recording: Single-press the front physical button again to stop and save the audio recording.
- Intelligent Voice Recording: The glasses offer accurate speech recognition and transcription for effortless real-time talks, preserving original sound for review.


3.3 Call Management
- Answer Incoming Call: Single-press the front physical button.
- Reject Incoming Call: Double-press the front physical button.
- Hang Up Call: Single-press the front physical button.

3.4 Music Playback
The glasses support local music playback through high-quality speakers.
- Play/Pause Music: Single-tap the right touch button.
- Next Track: Double-tap the right touch button.
- Previous Track: Triple-tap the right touch button.
- Music Switch: Long-press the right touch button for 1.5 seconds.


3.5 AI Features
- AI Photo Recognition & Q&A: The glasses integrate with advanced ChatGPT models for high accuracy in image recognition and answering questions. Simply use the camera to capture an image, and the AI can provide information or answer queries via the LensMoo app.
- AI Dialogue Interaction: Engage in intelligent conversations and receive information through AI dialogue.
- AI Vision Model Live Translation: Translation is achieved through the LensMoo app; it does not map directly onto the lenses.


3.6 Volume Control
- Increase Volume: Single-press the left touch button.
- Decrease Volume: Single-press the left touch button.
3.7 Flashlight
The glasses include a flashlight feature to brighten vision and assist in capturing light and shadow.

4. Maintenance
4.1 Cleaning
To clean your W600 Smart Glasses, use a soft, lint-free cloth. For lenses, a specialized lens cleaning solution is recommended. Avoid harsh chemicals or abrasive materials that could scratch the lenses or frame. Do not submerge the glasses in water.
4.2 Water and Dust Resistance
The glasses are rated IP65 for dust and water resistance. This means they are protected against dust ingress and low-pressure water jets from any direction. They are not designed for submersion or high-pressure water exposure. Avoid wearing them during swimming, showering, or in heavy rain.
4.3 Charging
Use the provided magnetic charging cable to charge your glasses. Connect the magnetic end to the charging port on the glasses and the USB end to a compatible power source. Ensure the connection is secure. The magnetic charging design helps prevent short circuits.
5. Troubleshooting
5.1 Common Issues & Solutions
- Glasses not powering on: Ensure the battery is charged. Long press the front physical button for 3 seconds.
- Unable to pair via Bluetooth: Make sure Bluetooth is enabled on your phone and the LensMoo app is open. Try triple-pressing the rear physical button on the glasses to initiate smart pairing or unpair previous connections.
- Camera not recording/taking photos: Check if the battery is sufficiently charged. Ensure you are using the correct button presses (single-press for photo, double-press for video start/stop).
- Audio recording issues: Verify Bluetooth connection. Ensure the front physical button is pressed correctly to start/stop recording.
- AI features not working: Confirm the glasses are connected to the LensMoo app and your phone has an active internet connection for AI processing (especially for ChatGPT integration). Remember that translation is processed via the app, not directly on the lenses.
- Overheating during recording: The glasses are designed for ultra-low power consumption to prevent overheating during continuous recording (supports over 2 hours). If overheating occurs, discontinue use and contact support.
6. Specifications
| Feature | Description |
|---|---|
| Product Model | W600 (BWW600) |
| Main Chip | Shenju W20 (Low power consumption, low latency) |
| Camera | 5MP, 720p HD Video Output |
| Waterproof Rating | IP65 (Dust-proof and water-resistant) |
| Special Features | AI photo recognition, AI Q&A, Photo/Video/Audio recording, Local music playback, Bluetooth calls, AI dialogue, Flashlight |
| Connection Method | Bluetooth |
| Battery Type | High-density polymer lithium-ion battery |
| Battery Capacity | 260mAh |
| Charging Type | Magnetic charging (anti-short circuit) |
| Battery Life | Approx. 12 hours music playback, over 7 days standby |
| Control Method | Physical buttons, touch control, mobile app synchronization |
| Appearance Material | TR tough material + matte black spray |
| Weight | 35g |
| Dimensions (W x H x L) | 146.85mm x 44.67mm x 141.64mm (approx.) |
| Lens Options | Customizable (sunglasses, blue light protection, myopia, presbyopia) |
| App Name | LensMoo |
| App Language Support | Russian, German, French, Simplified Chinese, English, Portuguese, Spanish |
| Certifications | CE, FCC, RoHS, UL |


7. User Tips
- AI Translation: Remember that AI translation is performed through the LensMoo app and the translated text will appear on your phone screen, not directly on the glasses' lenses.
- Comfortable Wear: The glasses are designed to be ultra-light (35g), ensuring comfort even during extended use.
- Battery Life: Take advantage of the long battery life for music playback (approx. 12 hours) and standby (over 7 days) for your daily activities.
- AI Q&A: Utilize the AI Q&A feature via the app for quick answers to your questions or for image recognition.
8. Warranty & Support
The LEEDOAR W600 Smart Glasses are manufactured to high-quality standards and hold certifications including CE, FCC, RoHS, and UL. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the manufacturer's customer support. Refer to the product packaging or the official LEEDOAR website for contact information.