Keeppley Ultraman Zero 03 Collectible Action Figure Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Keeppley Ultraman Zero 03 Collectible Action Figure. This product is an assembled movable model toy, part of a series featuring various Ultraman characters such as Ultraman X, Ultraman Nexus, Ultraman Victory, Ultraman Greeza, and Ultraman Zalgorg. Designed for collectors and enthusiasts, these figures offer articulation for dynamic posing and display.

Please read this manual thoroughly before beginning assembly to ensure correct usage and to maximize the lifespan of your figure.

2. Product Overview and Components

The Keeppley Ultraman Zero 03 series figures are building block models designed to be assembled. Each package typically includes:

• Building block figure parts (unassembled)
• Display base
• Effect parts (e.g., energy blasts, flames)
• Collector's card
• Instruction leaflet (not explicitly provided in data, but implied for building blocks)

The figures are made from plastic and feature multiple points of articulation, allowing for various poses. The specific character and included effect parts may vary depending on the model purchased.

Image: Three assembled Ultraman figures from the Keeppley series, showcasing their movable joints and included effect parts on display bases.

Image: An example of a Keeppley Ultraman figure, its display base, and a collector's card, as typically found in the package.

3. Setup and Assembly

Your Keeppley Ultraman figure is a building block model and requires assembly. Follow these general steps:

1. **Unpack Components:** Carefully open the packaging and lay out all the building block parts, the display base, effect parts, and the collector's card. Verify that all parts are present according to the included parts list (if available in the package).
2. **Review Instructions:** Consult the instruction leaflet provided within the package. These instructions will guide you through the step-by-step assembly process for your specific Ultraman model.
3. **Assemble the Figure:** Follow the visual diagrams and written steps in the instruction leaflet to connect the building blocks. Pay attention to the orientation and connection points of each piece.
4. **Attach Effect Parts:** Once the main figure is assembled, attach any included effect parts (e.g., energy blasts, flames) to the designated areas on the figure or the display base.
5. **Mount on Display Base:** Secure the assembled figure onto its display base. Ensure it is stable and balanced.

Important: Handle small parts with care. If any parts are difficult to connect, do not force them. Refer to the instruction leaflet for clarification.

Image: Example of product packaging, which contains the building block parts and instructions for assembly.

4. Operating Instructions (Posing and Display)

Your Keeppley Ultraman figure is designed with movable joints for dynamic posing. To "operate" your figure:

• **Gentle Movement:** Carefully manipulate the joints (shoulders, elbows, hips, knees, etc.) to achieve desired poses. Avoid excessive force, as this can damage the plastic or loosen joints.
• **Balance:** When posing, ensure the figure maintains its balance, especially if not secured to the display base. The display base is recommended for stable and long-term display.
• **Effect Parts:** Position the effect parts to enhance the dynamic nature of your chosen pose.

These figures are primarily for display and light interaction. They are not designed for rough play.

5. Maintenance

Proper care will help preserve the appearance and functionality of your collectible figure:

• **Cleaning:** To clean the figure, gently wipe it with a soft, dry cloth. For stubborn dust or grime, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
• **Storage:** Store the figure away from direct sunlight, high humidity, and extreme temperatures, which can cause discoloration or material degradation over time.
• **Handling:** Always handle the figure by its main body, avoiding excessive pressure on delicate parts or joints.

6. Troubleshooting

While these figures are generally robust, minor issues may arise:

• **Loose Joints:** If a joint becomes too loose, it may be possible to tighten it by carefully applying a small amount of clear nail polish or a specialized joint-tightening fluid to the joint, allowing it to dry completely before moving. Proceed with caution.
• **Parts Not Fitting:** Double-check the instruction manual to ensure you are attempting to connect the correct parts in the correct orientation. Do not force parts together.
• **Missing Parts:** If you discover missing parts upon opening the package, please contact the seller or manufacturer for assistance.

7. Specifications

8. User Tips

Based on general experience with collectible model figures:

• **Careful Assembly:** Take your time during assembly. Rushing can lead to broken parts or incorrect connections.
• **Display Stability:** Always use the provided display base for optimal stability, especially for figures with dynamic poses or attached effect parts.
• **Dusting:** Regular, gentle dusting with a soft brush or microfiber cloth will prevent dust buildup in crevices.
• **Joint Maintenance:** If joints become too stiff, a tiny amount of silicone lubricant can be applied, but use sparingly to avoid damaging the plastic.

No specific user tips from reviews or Q&A were available in the provided data.

9. Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• **Age Recommendation:** This product is recommended for ages 14 and up. Younger children should be supervised during assembly and play due to small parts.
• **Small Parts Hazard:** The product contains small parts which may pose a choking hazard for children under 3 years of age. Keep out of reach of infants and toddlers.
• **Material Safety:** The figure is made of plastic. Do not ingest any parts.
• **Avoid Extreme Conditions:** Do not expose the product to open flames, high temperatures, or corrosive substances.

10. Warranty and Support

For any questions regarding product defects, missing parts, or general support, please contact the seller directly through the platform where the purchase was made. Specific warranty terms and conditions, if any, should be obtained from the seller at the time of purchase.

Please retain your proof of purchase for any support inquiries.