HOTA D6 Ultra

Contents

HOTA D6 Ultra AC 300W DC 650W Dual Channel Smart Charger Instruction Manual

Model: D6 Ultra | Brand: HOTA

1. Introduction

Thank you for purchasing the HOTA D6 Ultra AC 300W DC 650W Dual Channel Smart Charger. This advanced charger utilizes GaN+SiC technology for high efficiency and low heat generation, offering powerful and reliable charging for a wide range of battery types. Please read this manual thoroughly before use to ensure safe and optimal operation.

HOTA D6 Ultra Smart Charger
Figure 1: HOTA D6 Ultra AC/DC Dual Channel Smart Charger

2. Safety Information

WARNING: Failure to follow these safety instructions can result in fire, electric shock, serious injury, or property damage.

  • Always operate the charger in a well-ventilated area, away from flammable materials.
  • Do not charge batteries unattended.
  • Ensure the charger is connected to a power source that matches its input voltage requirements (AC 100-240V or DC 6.5-30V).
  • Do not attempt to charge damaged or swollen batteries.
  • Always select the correct battery type and cell count settings before charging. Incorrect settings can lead to battery damage or fire.
  • Keep the charger away from water, moisture, and extreme temperatures.
  • Do not disassemble or modify the charger.
  • Keep out of reach of children.
  • The charger features built-in protection mechanisms (short circuit, overheat, overpower, reverse connection, capacity, time, low voltage, high voltage, overcurrent, VO standard flame retardant material). However, always exercise caution.
Ten layers of protection
Figure 2: Built-in ten layers of protection for safe and reliable charging.

3. Package Contents

Please check the package contents upon receipt:

  • HOTA D6 Ultra AC/DC Dual Channel Smart Charger (1 unit)
  • Power Cable (specific to selected plug type: EU, US, UK, AU)
  • User Manual (this document)

Note: Batteries and charging cables for specific battery types are typically sold separately unless specified.

4. Product Overview

The HOTA D6 Ultra is a compact yet powerful dual-channel smart charger. It features a color display, intuitive controls, and multiple ports for versatile charging.

HOTA D6 Ultra front view with display
Figure 3: Front view of the HOTA D6 Ultra showing the display and control knob.

4.1 Charger Components

HOTA D6 Ultra port diagram
Figure 4: Diagram of HOTA D6 Ultra ports and controls.
  • DC Port: Input for DC power (6.5-30V).
  • Wireless Charging: Top surface for compatible devices.
  • Channel Switch: Button to switch between Channel 1 and Channel 2.
  • AC Port: Input for AC power (100-240V).
  • USB Output: 5V/2.1A for charging external devices.
  • Update Port: For firmware updates.
  • Speed Shuttle Key: Multi-function knob for navigation and selection.
  • Balance Port for Channel 1 & 2: For balancing LiPo/LiHV/LiFe/Lilon batteries.
  • Battery Port for Channel 1 & 2: XT60 connectors for main battery connection.

4.2 Key Features

  • Dual Channel Charging: Simultaneously charge two batteries independently.
  • GaN+SiC Technology: Advanced semiconductor materials for high efficiency, low heat, and compact size.
  • Wide Voltage Input: Supports AC 100-240V and DC 6.5-30V.
  • High Power Output: AC 300W (with power distribution), DC 650W x 2.
  • Wireless Charging: Integrated wireless charging pad for compatible devices.
  • Intuitive UI: Simple and efficient user interface on a 2.8" color screen.
  • Comprehensive Protection: 10 layers of protection including short circuit, overheat, overpower, reverse connection, and more.
  • Max Balancing Current: Up to 1600mA for improved battery safety and lifespan.
GaN+SiC chip diagram
Figure 5: Illustration of GaN+SiC advanced technology.

5. Specifications

FeatureSpecification
BrandHOTA
Product NameD6 Ultra
Input VoltageAC 100~240V / DC 6.5~30V
Balance Current1600mA x 2
Charge Current0.1~15A x 2
Discharge Current0.1~3A x 2
Charge PowerDC 325W x 2 (@input voltage > 24V), AC 300W (Support power distribution)
External Discharge Current1~15A x 2
USB Output5V / 2.1A
Discharge PowerInternal Discharge: 15W x 2 (Balance port 10W x 2), External Discharge: 325W x 2 (650W)
Storage Temperature-20~60°C
Operating Temperature0~40°C
Battery Type SupportLiHv/LiPo/LiFe/Lilon/Lixx: 1~6S, NiZn/NiCd/NiMH: 1~16S, Smart Battery: 1~6S, Lead Acid(Pb): 1~12S (2~24V), Eneloop: 1~16S
Screen Size2.8” 320x240 260000 colors
Dimensions108mm x 105mm x 76mm
Net Weight575g

6. Setup

6.1 Power Connection

  1. AC Power: Connect the provided AC power cable to the AC port on the rear of the charger and then to a wall outlet (100-240V).
  2. DC Power: Alternatively, connect a DC power source (6.5-30V) to the DC port on the rear of the charger. Ensure correct polarity.
HOTA D6 Ultra rear view with AC and DC inputs
Figure 6: Rear view showing AC and DC power input ports.

6.2 Initial Power On

Once connected to power, the charger will automatically power on and display the main interface on its 2.8" color screen. Use the Speed Shuttle Key (knob) to navigate the menus.

7. Operating Instructions

7.1 Connecting a Battery

  1. Identify the correct battery type and cell count for your battery.
  2. Connect the main battery lead (e.g., XT60) to the corresponding Battery Port (CH1 or CH2).
  3. For LiPo/LiHV/LiFe/Lilon batteries, also connect the balance lead to the Balance Port for the same channel.
  4. Ensure all connections are secure and correct.

7.2 Basic Charging Process

  1. After connecting the battery, the charger will detect the battery type and display suggested settings.
  2. Use the Speed Shuttle Key to navigate to the desired charging mode (e.g., Charge, Balance Charge, Storage).
  3. Adjust the charge current and battery type/cell count if necessary. Always double-check these settings to match your battery's specifications.
  4. Press the Speed Shuttle Key to confirm and start the charging process.
  5. Monitor the charging progress on the screen. The charger will automatically stop when the battery is fully charged or the process is complete.
HOTA D6 Ultra UI Optimization
Figure 7: Optimized user interface for easy monitoring of charging status.

7.3 Dual Channel Operation

The D6 Ultra can charge two batteries simultaneously. Use the "Channel Switch" button to toggle between Channel 1 and Channel 2 to view or adjust settings for each channel independently.

7.4 Wireless Charging

To use the wireless charging feature:

  1. Place your Qi-compatible mobile phone or device on the wireless charging pad located on the top surface of the charger.
  2. Ensure the device is centered on the pad for optimal charging.
  3. The charger's screen may indicate when wireless charging is active.
HOTA D6 Ultra with phone on wireless charging pad
Figure 8: Using the integrated wireless charging feature.

7.5 USB Output

The USB output port (5V/2.1A) can be used to charge other USB-powered devices, such as smartphones or tablets.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the charger. Do not use solvents or abrasive cleaners.
  • Storage: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures (-20~60°C).
  • Firmware Updates: Periodically check the HOTA official website for firmware updates to ensure optimal performance and compatibility. Use the Update Port for this purpose.
  • Ventilation: Ensure the cooling fan and vents are free from dust and obstructions to maintain proper airflow and prevent overheating. The GaN technology allows for a low-speed fan, reducing noise.
HOTA D6 Ultra cooling system diagram
Figure 9: Efficient cooling system for quiet operation.

9. Troubleshooting

ProblemPossible CauseSolution
Charger does not power on.No power supply, loose connection, faulty power cable.Check power cable connection to charger and outlet. Ensure power source is active. Try a different power cable if available.
Battery not detected or charging error.Incorrect battery type/cell count selected, poor battery connection, damaged battery.Verify battery type and cell count settings. Reconnect main and balance leads securely. Inspect battery for damage.
Wireless charging not working.Device not Qi-compatible, device not properly aligned, foreign objects on pad.Ensure device supports Qi wireless charging. Reposition device on the center of the pad. Remove any metal objects or thick cases.
Charger overheating.Poor ventilation, excessive ambient temperature, internal fault.Ensure vents are clear and charger is in a well-ventilated area. Reduce charge current if possible. If problem persists, discontinue use and contact support.
Display is blank or frozen.Software glitch, power interruption.Disconnect power, wait a few seconds, then reconnect. If issue persists, check for firmware updates.

10. User Tips

No specific user tips available from provided data. Always refer to the safety guidelines and manufacturer recommendations.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer: HOTA

Model: D6 Ultra

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.