Comfast WiFi7 3600Mbps Outdoor CPE Wireless AP

1. Product Overview

The Comfast CF-EW87 is a high-power outdoor Wireless Access Point (AP) designed for robust and extensive WiFi coverage. Featuring WiFi7 technology, it delivers a combined wireless transmission rate of up to 3600Mbps across dual bands (2.4GHz and 5.8GHz). Equipped with three high-gain omnidirectional antennas, it ensures 360° signal coverage, making it ideal for various outdoor environments such as squares, resorts, and scenic spots.

Its rigorous industrial casing meets IP66 standards, providing waterproof, lightning-proof, moisture-proof, and anti-freeze protection, ensuring reliable operation in challenging weather conditions.

Key features include Gigabit Ethernet Ports, POE/DC Power Supply, Detachable Antennas, and 360° Omnidirectional Coverage.

Key Features:

• Powerful Performance: IPQ5312+QCN6412+QCA8337 brand chip solution for stable operation.
• Dual-Band Connectivity: 2.4GHz & 5.8GHz concurrent operation for stable signals and efficient anti-interference.
• High-Speed Transmission: Up to 3600Mbps wireless speed for an enhanced internet experience.
• Flexible Power Supply: Supports both POE (48V/0.32A) and DC (12V/1.5A) dual-mode power supply for easier construction and deployment.
• Detachable Antennas: Three 5dBi high-gain omnidirectional antennas for strong signal and easy adjustment.
• Robust Protection: IP66 protective industrial casing, offering waterproof, lightning-proof, moisture-proof, and anti-freeze capabilities.
• Multiple Working Modes: Supports AP, Bridge, Router, and Repeater modes.
• High Device Capacity: Can simultaneously connect 120+ terminal devices.
• Gigabit Ports: Equipped with 1 WAN and 2 LAN 10/100/1000Mbps RJ45 Ethernet ports.

2. Package Contents

Please verify that all items are present in your package:

• 1 x Comfast WiFi7 Outdoor AP (CF-EW87)
• 1 x Network Cable
• 1 x POE Power Supply
• 2 x Cable Ties
• 2 x Waterproof Caps
• 1 x Set of Gaskets and Screws
• 1 x Installation Manual (PDF version available at User manual (PDF))

Contents of the Comfast CF-EW87 package.

3. Specifications

Detailed product parameters and dimensions.

4. Initial Setup

This section guides you through the initial connection and configuration of your Comfast Outdoor AP.

4.1. Physical Connection

1. Power On: Under default configuration, power on the device and wait for approximately 90 seconds for it to start up.
2. Connect to Computer: Set your computer to automatically obtain an IP address. Connect the LAN1 port of the AP to your computer's Ethernet port.
3. Alternative Connection (Wireless): Connect to the device's wireless SSID (default is COMFAST_XXXX_2G or COMFAST_XXXX_5G, where XXXX are the last 4 digits of the AP's MAC address).

Physical ports and POE/DC power supply options.

4.2. Accessing the Web Management Interface

1. Open a web browser on your connected computer.
2. In the address bar, input 192.168.10.1 and press Enter to access the device login page.
3. Default Credentials:
   • Username: admin
   • Password: admin
4. Language Selection: The device supports both Chinese and English. You can select your preferred language using the icon in the top right corner of the login page.

5. Operating Modes

The Comfast CF-EW87 supports four main working modes: AP Mode, Bridge Mode, Router Mode, and Repeater Mode. You can select the desired mode in the Wizard upon initial setup.

Hardcore Configuration for Outdoor Use, including various features and device capacity.

5.1. AP Mode (Access Point)

In AP mode, the device acts as a central hub for wireless clients. It allows you to set up 2.4G and 5.8G wireless SSIDs, passwords, channels, and country settings. Once configured, mobile devices can connect to the SSID to access the internet via the AP's WAN port or PoE adapter LAN port.

• IP Address Setup: The AP needs to be assigned an intranet IP address. Ensure this IP address is within the same network segment as your upper network but does not conflict with the upper network router's IP. IP addresses for devices connected to the AP will be allocated by the upper network router.
• Wireless Settings: Configure your desired SSID name, password, operating channel, and country for both 2.4GHz and 5.8GHz bands.

5.2. Bridge Mode

Bridge mode is used to extend your wireless network by connecting two or more wired networks wirelessly. Ensure that WDS (Wireless Distribution System) is enabled on your upper network device.

• Intranet Segment: Set up an intranet segment for the AP, ensuring its IP address is not the same as the upper router.
• Wireless Connection: Select the wireless SSID signal of the upper network you wish to bridge and enter its wireless password. (Note: The password must match your upper network router's password).

5.3. Repeater Mode

Repeater mode extends the range of your existing wireless network by relaying the signal. The AP device can set its internal network segment (the gateway IP should not be the same as the upper device gateway IP).

• Network Segment: Configure the internal network segment for the AP.
• Relay Setup: Select the wireless SSID signal you want to relay from the available scan results and input its wireless password. (Note: The password must match your upper network router's password).

5.4. Router Mode

In Router mode, the device functions as a standard router, providing internet access to connected devices. It supports three common internet connection types:

• PPPoE: For connections requiring a username and password from your ISP.
• Static IP: For connections where your ISP provides a fixed IP address, subnet mask, gateway, and DNS servers.
• DHCP: For connections where your ISP automatically assigns network settings.

Refer to your Internet Service Provider (ISP) for the correct connection type and parameters.

6. Installation

The Comfast CF-EW87 supports both wall-mounted and pole-mounted installation methods. Choose the method most suitable for your outdoor environment.

6.1. Wall-mounted Installation

Use the provided screws and gaskets to securely mount the AP to a wall. Ensure the mounting surface is sturdy enough to support the device.

6.2. Pole-mounted Installation

Utilize the included cable ties and mounting accessories to attach the AP to a pole. Ensure the AP is firmly secured and oriented for optimal signal coverage.

Dual-mode easy installation: Wall-mounted and Pole-mounted options.

6.3. Power Supply Options

The device supports both Power over Ethernet (PoE) and DC power supply, offering flexibility in deployment.

POE/DC Dual Power Supply, adaptable to all scenarios.

7. Maintenance Regulations

Thank you for purchasing a COMFAST product. To protect your rights, please read the following maintenance regulations. Our company can provide paid service for issues not covered by free maintenance.

7.1. Conditions Not Covered by Free Maintenance:

• Failure to follow the installation manual, usage instructions, or maintenance guidelines, leading to product failure or damage.
• Damage occurring beyond the limited warranty period.
• Unauthorized alteration or tearing up of the product bar code.
• Unauthorized changes to the settings file or unauthorized disassembly of the device.
• Product damage caused by unexpected factors or human actions, such as improper input voltage, extreme temperature, water damage, mechanical damage, breakage, rust, or serious oxidation.
• Failure or damage caused by non-product issues, including design, technology, manufacturing, or quality problems from other products.

8. Troubleshooting

If you encounter issues with your Comfast Outdoor AP, please refer to the following common troubleshooting steps:

• No Power: Ensure the power adapter is correctly connected and the power outlet is functional. If using PoE, verify the PoE injector/switch is providing power.
• Cannot Access Web Interface:
  • Verify your computer's IP settings are set to obtain an IP address automatically.
  • Ensure your computer is connected to the AP's LAN1 port or the correct wireless SSID.
  • Double-check that you are entering the correct IP address (192.168.10.1) in the browser.
  • Confirm the default username (admin) and password (admin) are entered correctly.
• No Internet Connection:
  • Check the connection between the AP's WAN port and your modem/router.
  • Verify the operating mode (AP, Bridge, Repeater, Router) is correctly configured for your network setup.
  • If in Router mode, ensure the WAN settings (PPPoE, Static IP, DHCP) are correctly configured with information from your ISP.
  • Check if the upper network device (modem/router) has internet access.
• Weak or Unstable WiFi Signal:
  • Ensure the detachable antennas are securely attached and oriented correctly.
  • Check for physical obstructions (walls, large metal objects) between the AP and client devices.
  • Consider adjusting the AP's location for better line-of-sight coverage.
  • In AP/Repeater mode, ensure the AP is within good signal range of the main router.
• Devices Cannot Connect to WiFi:
  • Verify the SSID and password are correct.
  • Check if the maximum number of connected devices has been reached (though the CF-EW87 supports 120+ devices).
  • Restart the AP and the client device.

9. User Tips

• For optimal outdoor coverage, consider the placement of the AP carefully. Mounting it high and with clear line-of-sight to the desired coverage area will yield the best results.
• When configuring in Repeater or Bridge mode, ensure the AP has a strong and stable connection to the main router to avoid performance bottlenecks.
• Regularly check for firmware updates on the Comfast official website to ensure optimal performance and security.
• Utilize the dual power supply options (PoE or DC) to simplify installation based on your specific outdoor wiring capabilities.

10. Warranty & Support

10.1. Copyright Information

Statement: Shenzhen Four Seas Global Link Network Technology CO.,Ltd. Company all rights reserved.

Without official written permission, no unit or individual shall copy, reproduce, transcribe, or translate in part or whole this book. This includes any form or means (electronic, mechanical, printing, recording, or other possible means) for the propagation of goods or for any commercial, profitable purposes.

COMFAST is the registered trademark of Shenzhen Four Seas Global Link Network Technology Co.,Ltd. Company. All other trademarks or registered trademarks mentioned in this document are by their respective owners.

Product specifications and information mentioned in this manual are for reference and are subject to updates without notice. Unless otherwise specifically agreed, this manual is intended only as a user guide. All statements and information herein do not constitute any form of guarantee.

Product Quality Certificate.

10.2. Manufacturer Contact

• Manufacturer: Shenzhen Four Seas Global Link Network Technology Co.,Ltd.
• Address: 9th Floor, Building H, Huanan Digital Valley, No. 1 Huanan Road, Longhua District, Shenzhen, China
• Hotline: 0755 83790059 / 83790659
• Website: www.szcomfast.com