1. Introduction and Overview
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MEKEDE Wireless Carplay Android Auto Upgrade Decoder Box. This device is designed to upgrade your original vehicle system by adding wireless Apple CarPlay and Android Auto functionalities, enhancing your in-car multimedia experience while retaining the original screen and controls.
Key Features:
- Wireless Apple CarPlay and Wired CarPlay support.
- Wireless and Wired Android Auto support.
- Android Mirroring-Link for Android phones and Mirror Link for iOS.
- Integrated GPS navigation with support for Google Maps, Waze, Apple Maps, and live traffic information.
- Music streaming from apps like Spotify, Apple Music, Amazon, with lyrics display on compatible apps.
- Voice control via "Hey Siri..." button activation.
- Support for aftermarket front, rear, and 360-degree cameras with dynamic guidance lines.
- USB port for playing music and videos from a flash drive.
- Full compatibility with OEM buttons, steering wheel controls, and iDrive knob control.
- Supports original camera and parking sensor systems.

2. Compatibility
The MEKEDE Wireless Carplay Android Auto Upgrade Decoder Box is compatible with various Lexus models and their original screen sizes. Please verify your vehicle's exact model and manufacturing year to ensure proper fitment and functionality.
Supported Lexus Models and Years:
- ES: 2014-2017
- RX: 2015.09-2018
- NX: 2015-2018
- IS: 2014-2017
- CT200h: 2015-2020
- LC, LS, LX-570, GS Series: Specific years may vary, please consult the seller or the included instruction manual for precise compatibility.
The system supports original vehicle screens ranging from 7 inches to 10.3 inches.

3. Package Contents
Upon opening your package, please ensure all the following items are present:
- Wireless Car-play Box (Main Decoder Unit)
- Instruction Manual (Detailed installation and operation guide)
- Power Cable
- Wifi Antenna
- MIC (Microphone, included only if your original car does not have a built-in microphone)
- LVDS Video Cable

4. Setup and Installation
The MEKEDE Decoder Box is designed for integration with your vehicle's existing multimedia system. Professional installation is recommended due to the complexity of accessing vehicle wiring and interior components. Refer to the detailed instruction manual included in your package for specific wiring diagrams and installation steps for your Lexus model.
Installation Overview:
- Access Vehicle System: Carefully remove necessary trim panels to access the back of your car's original display unit and wiring harness.
- Connect Power Cable: Connect the provided power cable to the decoder box and the vehicle's power source, ensuring proper polarity.
- Connect LVDS Video Cable: Disconnect the original LVDS cable from your car's screen and connect it to the 'LVDS IN' port on the decoder box. Then, connect the provided LVDS video cable from the 'LVDS OUT' port on the decoder box to your car's screen.
- Connect Wifi Antenna: Attach the Wifi antenna to the designated port on the decoder box for wireless connectivity.
- Connect Microphone (if applicable): If your vehicle lacks an original microphone, connect the provided MIC to the decoder box.
- DIP Switch Configuration: The decoder box features DIP switches (labeled H 1 2 3 4 5 ON DIP) on its side. These switches are crucial for configuring the box to your specific Lexus model and screen size. Refer to the included instruction manual for the correct DIP switch settings for your vehicle. Incorrect settings may lead to improper functionality or display issues.
- Optional Camera Connections: If installing aftermarket front, rear, or 360-degree cameras, connect them to the appropriate input ports on the decoder box as per the included manual.
- Test Functionality: Before reassembling the vehicle interior, power on the car and test all functions of the decoder box, including CarPlay, Android Auto, Mirror Link, voice control, and camera inputs.
- Reassemble: Once all functions are verified, carefully reassemble the vehicle's interior panels.


5. Operating Instructions
Once installed, the MEKEDE Decoder Box integrates seamlessly with your car's original system, allowing you to switch between the original interface and the CarPlay/Android Auto interface.
5.1. Connecting to CarPlay/Android Auto:
- Wireless Connection:
- Ensure Bluetooth is enabled on your smartphone.
- On your car's screen, navigate to the CarPlay/Android Auto interface (usually by pressing a specific OEM button or selecting an input).
- Pair your phone with the decoder box via Bluetooth.
- Once paired, the system will automatically establish a Wi-Fi connection for wireless CarPlay/Android Auto.
- Wired Connection:
- Turn off Wi-Fi on your smartphone.
- Connect your iPhone via a Lightning cable or Android phone via a USB cable to the USB port provided by the decoder box.
- The system should automatically launch CarPlay/Android Auto. Wired connection also charges your phone.


5.2. Mirror Link:
The device supports Mirror Link for both iOS and Android systems, allowing you to mirror your phone's screen directly onto the car's display.

5.3. Controls:
- OEM Buttons: Utilize your car's original buttons to navigate the CarPlay/Android Auto interface.
- Steering Wheel Controls: Control audio playback, calls, and other functions directly from your steering wheel.
- iDrive Knob Control: Use the iDrive knob for intuitive menu navigation.
- Voice Control: Activate voice assistants (e.g., Siri) by pressing the designated voice control button on your steering wheel and saying commands like "Hey Siri..."


5.4. Other Functions:
- Navigation: Access GPS navigation apps like Google Maps, Waze, and Apple Maps for real-time traffic and directions.
- Communication: Make and receive calls, and view messages directly from the car's display.
- Media Playback: Stream music from various apps or play videos and audio files from a USB flash drive connected to the decoder box.
- Camera Display: View feeds from original or aftermarket cameras (rear, front, 360) on the car screen, with dynamic guidance lines for parking assistance.



6. Troubleshooting
If you encounter issues with your MEKEDE Decoder Box, please refer to the following common troubleshooting steps. For more detailed solutions, consult the full instruction manual or contact customer support.
- No Display/Black Screen:
- Check all cable connections, especially the LVDS video cable and power cable, to ensure they are securely seated.
- Verify that the DIP switches are set correctly for your specific car model and screen size as per the included manual.
- Ensure the car's ignition is on and the multimedia system is powered.
- CarPlay/Android Auto Not Connecting:
- For wireless connection, ensure Bluetooth is on and your phone is paired. Then, check Wi-Fi connectivity.
- For wired connection, ensure Wi-Fi is off on your phone and try a different USB cable.
- Restart your phone and the car's multimedia system.
- Audio Issues:
- Ensure the audio output settings on your car's multimedia system are correctly configured to receive audio from the decoder box (e.g., AUX input).
- Check volume levels on both your phone and the car's system.
- Controls Not Responding:
- Verify that the decoder box is fully powered and connected.
- Ensure the correct input mode is selected on your car's screen to interact with the CarPlay/Android Auto interface.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | MEKEDE |
| Origin | Mainland China |
| Supported Functions | Wireless/Wired CarPlay, Wireless/Wired Android Auto, Mirror Link, GPS Navigation, Media Playback, Voice Control, Camera Input |
| Control Methods | OEM Buttons, Steering Wheel Controls, iDrive Knob, Voice (Siri) |
| Supported Screen Sizes | Original 7" - 10.3" Lexus screens |
| Package Dimensions (L x W x H) | 23 cm x 15 cm x 10 cm |
| Package Weight | 1.2 kg |
8. User Tips
- Verify Compatibility: Before purchasing or installing, always confirm the exact model and manufacturing year of your car. Sending a photo of your control panel and display screen to the seller can help ensure you receive the correct item.
- Professional Installation: While the system is designed for integration, the installation process involves disassembling parts of your car's interior and connecting to sensitive electronics. Professional installation is highly recommended to avoid damage to your vehicle or the product.
- Firmware Updates: MEKEDE provides free updates for firmware, software, UI, and GPS navigation maps. Regularly check for updates to ensure optimal performance and access to new features.
9. Warranty and Support
Your MEKEDE Wireless Carplay Android Auto Upgrade Decoder Box comes with a standard 1-year warranty period from the date of receipt. We are committed to providing a personalized experience and continuous support.
Warranty Details:
- Standard Warranty: 1 year from the date of receipt.
- Extended Warranty: The warranty period can be extended to 2 years if you provide a 5-star review and share installation photos on the platform, then provide feedback to us.
- Problem Resolution: If the product experiences a problem within 365 days after receipt confirmation, please contact us. We offer free return and refund within 15 days, or direct replacement of the unit. Communication with our support team is required first.
Technical Support:
MEKEDE maintains a dedicated R&D team to assist customers with technical problems quickly and efficiently. For any technical inquiries or support needs, please refer to the contact information provided in your purchase documentation or on the official MEKEDE website.