DSPIAE ES-A PRO

Contents

DSPIAE ES-A PRO Reciprocating Electric Sander

Model: ES-A PRO "Illusive Shadow"

Product Overview

The DSPIAE ES-A PRO "Illusive Shadow" is an upgraded reciprocating electric sander designed for ultra-fine operation and high-efficiency sanding in assembly model hobbies and craft projects. It features an optimized motor, precise gear and drive train, and a direct connection charging module for continuous use.

DSPIAE ES-A PRO Reciprocating Electric Sander with reciprocating action illustration
The DSPIAE ES-A PRO Reciprocating Electric Sander, showcasing its precise sanding motion.
Hand holding the DSPIAE ES-A PRO sander, highlighting its extruded outer shell
Ergonomic design with an extruded outer shell for comfortable handling.

Package Contents

  • Reciprocating Electric Sander x1
  • Sanding Head x8 (various shapes)
  • Dedicated Silicon Sandpaper Set (#180/#280/#400/#600/#800/#1000/#1200, 8 shapes * 7 grits * 3 pcs)
  • Power Cord x1 (Type-C)
  • Storage Box x1
Image showing all items included in the DSPIAE ES-A PRO package: sander, 8 sanding heads, silicon sandpaper set, power cord, and storage box.
All components included in the DSPIAE ES-A PRO package.

Setup

  1. Unpack: Carefully remove all components from the storage box.
  2. Attach Sanding Head: Select the appropriate sanding head for your task. The sander features 8 types of quick-release interchangeable sanding bits. Simply push the desired sanding head firmly into the sander's tip until it clicks into place.
  3. Apply Sandpaper: Choose the desired grit from the silicon sandpaper set. The sandpaper has an adhesive backing for easy application to the sanding head. Ensure it is securely attached.
  4. Initial Charge: Before first use, fully charge the device using the provided Type-C power cord. Connect the Type-C cable to the charging port on the sander and the other end to a compatible 5V3A or below charging device. The charging indicator will show progress.
Diagram showing how to attach and detach the 8 types of quick-release interchangeable sanding bits.
Quick-release interchangeable sanding bits for various tasks.
Image showing the 8 different shapes of sanding heads included with the sander.
The eight distinct sanding head shapes.
Image showing the silicon sandpaper set with various grits from #180 to #1200.
Silicon sandpaper set with various grits for different finishing needs.

Operating Instructions

  1. Power On/Off: The sander features a convenient one-touch start/stop function. Press the power button to turn the device on or off.
  2. Adjust Speed: The sander offers multiple sanding speeds (4100/4500/5400rpm). Refer to the product's interface for speed adjustment options.
  3. Sanding Action: The electric reciprocating sanding action mimics real human hand movement, providing high efficiency and less vibration. Apply gentle pressure to the surface you are sanding.
  4. Charging During Use: The PRO edition allows for dual operation modes: "unplugged operation" and "charge while play" thanks to its independent power path management design. You can continue using the sander while it is connected to a charger.
Close-up of the electric reciprocating sanding action on a model part, showing before and after results.
Demonstration of the electric reciprocating sanding action.
Image showing the sander in hand, highlighting the one-touch start/stop button and the extruded outer shell.
One-touch start/stop functionality for ease of use.
Close-up of the sander being charged via its direct connection charging module.
Direct connection charging module allows use while charging.

Product demonstration video showcasing the sander's features and operation.

Maintenance

  • Cleaning: After each use, gently clean the sanding head and the sander body to remove any dust or debris. Use a soft, dry cloth.
  • Battery Care: If the sander will not be used for an extended period, ensure it is properly charged every six months to prevent damage to the Lithium battery due to over-discharge.
  • Storage: Store the sander and its accessories in the provided storage box in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Sandpaper Replacement: Replace sandpaper when it becomes worn or loses its abrasive quality.
Image showing the sander being charged and stored in its case.
Easy storage in the dedicated case for repeated use.

Troubleshooting

  • Sander not turning on: Ensure the device is sufficiently charged. If the battery is low, connect it to a charger.
  • Motor stalls during operation: This can occur if brutal force is applied to the working sanding head, causing overload. Reduce pressure and ensure the sanding head is not obstructed.
  • Poor sanding performance: Check if the sandpaper is worn out and replace it if necessary. Ensure the correct grit and sanding head are used for the material and desired finish.
  • Charging issues: Verify that the charging cable is securely connected to both the sander and a compatible 5V3A or below charging device. This product does not support quick charge protocols.
Image detailing product specifications and precautions for safe use.
Refer to precautions for safe and effective operation.

Specifications

Feature Detail
Name "Illusive Shadow" Reciprocating Electric Sander
Model ES-A PRO
Sanding Speed 4100/4500/5400rpm
Dimensions 178 x 21 x 18 mm
Net Weight 65 ± 1g
Main Material Nylon, Aluminum Alloy
Max Pressure 350/420/480g
Reciprocating Travel 2.5 ± 0.1mm
Horizontal Tolerance ± 0.1mm
Lateral Tolerance ± 0.1mm
Battery Capacity 280mAh
Charging Time 25 ± 3min
Work Duration (no load) 80 ± 5min
Rated Power 3.5W
Load Output 910mA MAX
No-load Output 330mA MAX
Comparison table of specifications between Illusive Shadow and Illusive Shadow PRO sanders.
Detailed specifications for the ES-A PRO model.

Precautions

  • Do not use this sander when ambient temperature is above 40°C.
  • Keep out of reach of children under 14 years of age to avoid injury.
  • Avoid tapping/dropping this product which may cause damage or malfunction.
  • Do not cover/block this sander while it is under working condition by any means to ensure proper heat dissipation.
  • Should you want to leave this sander not for use for a long time, keep it properly charged every six months so that the Lithium battery will not be damaged due to over-discharge.
  • Do not apply brutal force on the working sanding head. Motor would likely to stall when overloaded.
  • This sander is designed for use with compact parts for precision sanding/polishing. Do not use it on large objects.

User Tips

  • For optimal results, match the sanding head shape to the contour of the part you are working on.
  • Start with a coarser grit sandpaper (e.g., #180, #280) for removing larger imperfections, then gradually move to finer grits (e.g., #1000, #1200) for a smooth finish.
  • Always test the sander on a scrap piece of material before working on your main project to get a feel for the pressure and speed required.
  • The silicon sandpaper's flexible and stretchy abrasive layer, combined with its adhesive backing, provides excellent conformability to complex shapes.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official DSPIAE website or contact your authorized retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.