Freshliance G100

Contents

Freshliance G100 WIFI Gateway Real-time Temperature and Humidity Monitoring System User Manual

Model: G100

Brand: Freshliance

1. Introduction

The Freshliance G100 system provides real-time temperature and humidity monitoring for various environments such as cold rooms, laboratories, small warehouses, and other small areas. This comprehensive system integrates BlueTag series data loggers, the G100-S gateway, a router, a cloud platform, and a mobile application.

BlueTag series data loggers record on-site temperature and humidity, transmitting data continuously to the G100-S WiFi gateway via Bluetooth. The G100-S then relays this data to the cloud in real-time using WiFi communication. The system supports connections for up to 20 configurable Bluetooth loggers. Users can remotely access real-time temperature and humidity data, view live changes, and review data history through the mobile app or PC platform. The system also provides SMS or email alerts for any deviations. For challenging or hard-to-reach locations, BlueTag series loggers can be equipped with one or two external probes.

Diagram of Freshliance G100 system showing gateway, sensors, cloud, and monitoring devices
Figure 1: Overview of the Freshliance G100 Monitoring System. This diagram illustrates the connection between BlueTag sensors, the G100 WiFi Gateway, the cloud platform, and user monitoring devices (PC and mobile).

2. Setup

  1. Powering the Gateway: Connect the G100 WiFi Gateway to a power source using the provided DC 5V/1A Mini-USB adapter.
  2. WiFi Connection: Connect the G100 Gateway to your local WiFi network. Follow the instructions in the mobile application for initial network configuration.
  3. Sensor Pairing: Pair your BlueTag Bluetooth sensors with the G100 Gateway via Bluetooth communication. Refer to the BlueTag sensor's individual manual for specific pairing instructions. The G100 can support up to 20 sensors.
  4. External Probes (Optional): If using external probes with BlueTag sensors, ensure they are securely connected to the sensor unit.
Freshliance G100 WiFi Gateway with WiFi and Cloud upload icons
Figure 2: The G100 WiFi Gateway, indicating its WiFi connectivity and cloud upload capabilities.

3. Operating Instructions

Once the G100 Gateway and BlueTag sensors are set up and connected, you can begin monitoring your environment.

  • Real-time Monitoring: Access the mobile application (Android and iOS) or the web platform to view real-time temperature and humidity data from all connected sensors.
  • Data Review and Management: The platform allows for comprehensive data analysis, filtration, and graphing of live changes and historical data.
  • Alarm Notifications: Configure alarm thresholds for temperature and humidity. The system will send SMS or email alerts if these thresholds are exceeded.
  • Offline Data Caching: In case of temporary network loss, the system features persistent caching. Data recorded during offline periods will be automatically re-uploaded to the cloud once network connectivity is restored, ensuring no data loss.

Application Scenarios

Wine cellar temperature and humidity monitoring with G100 system
Figure 3: Real-time temperature and humidity monitoring in a wine cellar, showing data trends and alarm indicators.
Warehouse temperature and humidity monitoring with G100 system
Figure 4: Real-time temperature and humidity monitoring in a warehouse, displaying environmental data and system components.
Machine room temperature and humidity monitoring with G100 system
Figure 5: Real-time temperature and humidity monitoring in a machine room, illustrating data visualization and system integration.

4. Maintenance

  • Cleaning: Gently wipe the G100 Gateway and BlueTag sensors with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement (BlueTag T10 Logistics Sensor): The BlueTag T10 uses a 3.0V CR2032 lithium battery with a battery life of approximately 1 year. Replace the battery when indicated by the device or app.
  • Rechargeable Battery (BlueTag Storage Sensors): BlueTag storage sensors are equipped with rechargeable lithium batteries. Ensure they are charged as needed to maintain continuous operation.
  • Firmware Updates: Periodically check the mobile application or web platform for available firmware updates for the G100 Gateway and BlueTag sensors to ensure optimal performance and access to new features.

5. Troubleshooting

  • No Data on App/Web:
    - Check if the G100 Gateway is powered on and connected to your WiFi network. The gateway has persistent caching, so data should re-upload once the network is restored.
    - Ensure BlueTag sensors are powered on and within Bluetooth range of the G100 Gateway.
    - Verify that the mobile app or web platform has an active internet connection.
  • Inaccurate Readings:
    - Ensure sensors are placed in appropriate locations, away from direct heat sources, cold drafts, or excessive moisture.
    - Calibrate sensors if necessary, following instructions in the app or sensor manual.
  • Sensor Disconnection:
    - Check the battery level of the BlueTag sensor.
    - Ensure the sensor is within the 100m (open area) Bluetooth range of the G100 Gateway. Obstacles can reduce this range.
  • Gateway Not Connecting to WiFi:
    - Verify your WiFi network is 2.4GHz, as the G100 operates on this band.
    - Check your WiFi password and signal strength.

6. Specifications

G100 WiFi Bluetooth Gateway

FeatureSpecification
ModelG100 WiFi Bluetooth Gateway
Antenna TypeExternal antenna*2
Antenna Gain6dBi
PowerDC 5V/1A, Mini-USB
Standby Current≤40mA
Maximum Current≤90mA
Maximum Connections20 sensors
Communication NetworkWiFi/Bluetooth
WiFi Frequency Band2.4GHz
Bluetooth Range100m (open area)
Operation SystemAPP of Android and iOS and Web
Working Temperature-20℃~+55℃
Working Humidity5%~95%RH (non-condensing)
Storage and Transportation-40℃~+70℃
DimensionsDevice: 93mm*62mm*21mm; Antenna: 19.5mm*13mm
Weight97g

Bluetooth Sensors for Storage (BlueTag Series)

FeatureBlueTag TH10RBlueTag TH10R-IBlueTag TH30RBlueTag TH30R-IBlueTag TH30R-ETU
Internal Probe TypeTemperature and humidity
External ProbeOptional√
External Probe ChannelsMax. 2 probes
External Probe TypeSee External Probe List
Internal Temperature Range-30℃~+70℃
Internal Temperature Accuracy±0.5℃ F.S.
Temperature Units℃, ℉
AlarmsMax. 6 Alarm Points
ReportPDF/CSV
ConnectionBluetooth 5.2
Start Delay0 minute~72 hours
Logging Interval1 minute ~99 minutes
Memory Capacity20000 readings each probe
Device Dimensions83mm*68mm*20.5mm
BatteryRechargeable lithium battery
InstallationHanging, Folding stand
Weight85g (Main device)90g (Main device)

External Probe List

FeatureType 1Type 2Type 3Type 4Type 5Type 6Type 7Type 8
External Probe Type (Temperature Range)-30℃~+70℃-30℃~+70℃-40℃~+85℃-80℃~+200℃-90℃~+400℃-90℃~+80℃-90℃~+200℃-196℃~+200℃
Temperature Accuracy±0.5℃ (-90℃~+70℃); ±1.0℃ (Others)
Cable Length2m, 5m, 10m, 15m or 20m (5 adhesive cable clips every 2m, for cable management)

Bluetooth Sensors for Logistics (BlueTag T10)

FeatureSpecification
ModelBlueTag T10
Memory CapacityMax. 65,000 readings
Shelf Life1 year
Start Delay0 minute-72 hours
Battery Life1 year
Logging Interval1 minute-99 minutes
Wireless ConnectionBluetooth 5.2
Battery3.0V CR2032 lithium battery
APP LanguageChinese, English, French, German, Portuguese, Russian, Spanish
APP OSAndroid, iOS
Temperature Unit℃, ℉
Report FormatPDF & CSV
Temperature Range-30℃~+70℃
Temperature Accuracy±0.5℃ F.S.
Weight7.8 g
Dimension48mm*31mm*5mm
Installation3M adhesive tape
CertificationCE, RoHS, EN12830

7. User Tips

  • Cloud Storage: Benefit from 2 years of free data cloud storage, ensuring your historical data is always accessible.
  • Flexible Probes: Utilize external probes with your BlueTag sensors for monitoring in hard-to-reach areas or for specific temperature ranges not covered by internal sensors.
  • Regular Monitoring: Regularly check the app or web platform to stay informed about your environmental conditions and respond promptly to any alerts.

8. Warranty and Support

The Freshliance G100 WIFI Gateway and associated BlueTag sensors come with a 2-year warranty from the date of purchase.

For technical support, inquiries, or warranty claims, please contact Freshliance customer service:

Contact information for Freshliance: Email, Phone, Website
Figure 6: Freshliance contact details for support.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.