1. Introduction
Thank you for choosing the Junsun Car Navigation System. This manual provides detailed instructions on the basic functions, usage skills, and precautions for your car radio. Please read it carefully before use to ensure optimal performance and a safe driving experience.
2. Safety & Warnings
- Do not operate the device while driving.
- Ensure the device is installed in a position that does not obstruct the driver's view to ensure safe driving.
3. Setup & Installation
3.1 Package Contents
The package includes the following accessories:
- Frame
- Power Cable
- 4PIN USB Cable
- 6PIN USB Cable
- Video Input Cable
- GPS Module
- Canbus (if applicable to your model)
- 4G Module (for 4G versions only)
- 4G SIM Cable (for 4G versions only)
- Instruction Manual
Refer to the image below for a visual representation of the included accessories:

3.2 Physical Installation
The Junsun car radio features a plug-and-play design. The power cable is pin-to-pin, allowing direct connection to the car's power interface for easy installation.

3.3 Rear View Camera Connection
To connect the rear view camera, follow these steps:
- Red cable (② in diagram) connects to the backup light "+".
- Black cable (① in diagram) connects to the “GND“ (ground).
- The reversing detection cable (④, brown color) connects to the red cable (③) extending from the video input cable.

3.4 Steering Wheel Control Setup
The device supports steering wheel control, allowing convenient operation without taking your hands off the wheel. The setup method depends on whether your car has a CAN protocol.
3.4.1 For Models Without CAN Protocol (Learning Type)
If your product does not include a Canbus, you will need to manually learn the steering wheel controls:
- Navigate to "Settings > Vehicle Settings > General > Steering Wheel Control Type > Learning Type".
- Click the button you want to learn on the screen.
- Press the corresponding button on the steering wheel of your vehicle. If successful, the button on the screen will change color.
- Repeat steps 2 and 3 until all buttons on the steering wheel are set.
- Click [End] to finish the setup.
Note: If you need to relearn a button, click [Start] then [Clear], and repeat the steps.
3.4.2 For Models With CAN Protocol
If your product includes a Canbus:
- Ensure the 8-pin interface of the Canbus cable is properly connected.
- Navigate to "Car Settings > Factory > Password (000000) > CarType Setting".
- Select the corresponding vehicle information and click OK to save.

4. Operating Instructions
4.1 Boot and Shutdown
- Boot: Plug in the car key, turn on the ACC power. The device will automatically boot and display the boot LOGO animation.
- Shutdown: After removing the car key and turning off the ACC power, the device will automatically shut down.
Key Functions:
| Icon | Function | Description |
|---|---|---|
| Power | Power | In power-on state, long press for sleep screen; short press for mute. |
| Home | Main Interface | Press to return to the main interface. |
| Return | Return | Press to return to the previous interface and exit the current source. |
| Volume + | Volume Up | Press to increase volume. |
| Volume - | Volume Down | Press to decrease volume. |
4.2 Main Interface and Application Interface
- The device features a multi-page screen; slide left or right to switch between pages.
- Click the application icon (usually a grid or 'Apps' icon) on the main interface to access the application interface.
4.3 Status Bar and Drop-Down Menu
The status bar at the top of the screen provides quick access to various functions and settings, including screen off, reboot, mute, Wi-Fi, and screenshot. Swipe down from the top to reveal the full drop-down menu.
4.4 Wallpaper Replacement
You can personalize your device's wallpaper:
- Go to "Settings > Car Settings > Display > Wallpaper".
- Choose your preferred wallpaper source (e.g., Live Wallpapers, Wallpapers).
4.5 Navigation Function
To use the navigation function:
- From the main interface, click the navigation icon (often a map symbol) or select the navigation function from the application interface.
- Copying and Installing Maps: If your device does not have pre-installed maps, you can copy map packages and APKs to an SD card or USB flash drive. Then, use the File Manager (accessible from the application interface) to install the map APK.
- Selection of Navigation Path: In "Settings > Car Settings > Navigation Software", select your preferred navigation application.

4.6 Radio Function
Click the radio icon on the main interface or application interface to access the radio. The device supports FM-RDS and online radio (for 4G versions).

4.7 Bluetooth Function
Access the Bluetooth interface by clicking the Bluetooth icon. It supports Bluetooth 5.0 for stable connections.
- Paired Devices: In the Bluetooth interface, click the search icon to find nearby devices. Select the device to pair. A PIN code may appear on your phone. A successful connection is indicated by a specific icon.
- Bluetooth Music: Click the music player icon to enter the music player interface. After connecting your phone, you can control music playback (Play, Pause, Previous, Next). Note: Some mobile phones require the music app to be open on the phone first.
- Bluetooth Address Book: In the Bluetooth interface, click the address book icon. Select Phone/SIM and click [Download] to synchronize your phone's address book.

4.8 Music and Video Playback
- Music Function: Click the music icon to enter the music player. Select the playback path (Playlist, SD Card, U Disk, Local) at the top.
- Video Function: Click the video icon to enter the video playback interface. Supported formats include MP4, AVI, WMV, MOV, MKV, MPEG, RMVB.
4.9 Equalizer (EQ) and Sound Settings
The device offers comprehensive sound customization:
- Accessing EQ: From the application interface, click the EQ icon, or from the radio/music interface, click the EQ icon.
- Equalizer Settings: Choose from 8 sound effects (Flat, Pop, Rock, Jazz, Classic, User, etc.) and adjust individual frequency bands.
- Sound Field Settings: Adjust bass and loudness, and control volume for front left, front right, rear left, and rear right speakers.
- Reversing Mute: When checked, the car will have no sound output when reversing. When unchecked, sound will be output.
- Navigation Channel: Configure whether navigation sounds play through front speakers only or all four channels.
- Navigation Volume: Adjust the navigation voice volume.
- Device Ringtone: Music played when the car calls.
4.10 AUX IN Function
Enter the AUX IN interface. If no video input signal is connected, it will display "No Video Signal". With a connected signal, it will display the video screen.
4.11 Third Party Application - ZLINK5
After successful activation, the ZLINK5 connection interface will display a corresponding mark. This feature supports full-featured wired CarPlay and wired Android Auto. If wired CarPlay/Android Auto is activated, only the last two icons will be displayed. If the interface is not displayed after activation, restart the car.
4.12 WiFi Settings
There are two ways to manage Wi-Fi:
- Drop-down Menu: Short press the WLAN function to toggle on/off. Long press to enter the WLAN settings interface.
- Settings Menu: Go to "Settings > Network and Internet > WLAN".
4.13 Date and Time
The device automatically calibrates time. You can manually set the date, time, time zone, and format via "Settings > System > Date and time".
4.14 Switching Input Method
Manage input methods via "Settings > System > Language and Input Method > Virtual Keyboard > Manage Keyboard". Enable the desired keyboards and disable others.
4.15 Split Screen
Click the split screen icon to pop up multiple pages. Drag the desired pages to the left and right to enable split-screen mode.

4.16 Button Light Settings
Customize the button backlighting:
- Go to "Settings > Car Settings > Display > Illumination Color".
- Model 1: Open LED Animation for automatic color change.
- Model 2: Close LED Animation to manually switch colors.
4.17 AI Voice Control
The device supports AI voice control. Activate it by saying the wake-up word (e.g., "Hey Top"). You can then issue commands for music playback, navigation, and more.
4.18 Parking Location and GPS Tracking (4G Version Only)
The Junsun exclusive design (for 4G versions) includes locus management for viewing GPS track information and a parking location feature to help you find your parked car.

4.19 ADAS Full HD Camera
The device integrates advanced driver assistance systems with 1080P HD shooting. Features include Lane Departure Warning System (LDWS), Front Vehicle Departure Warning (FVDW), and Forward Collision Warning System (FCWS). It supports hidden installation and displays information on the large screen for enhanced safety.

4.20 360 Surround View Camera
The device supports 360-degree surround view cameras (optional accessories) to provide a comprehensive view around your vehicle, aiding in parking and maneuvering in tight spaces.
5. Maintenance
To ensure the longevity and optimal performance of your Junsun Car Radio, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
- Temperature: Avoid exposing the device to extreme temperatures, both hot and cold, as this can affect its electronic components.
- Software Updates: Regularly check for and install OTA (Over-the-Air) software updates to ensure you have the latest features, bug fixes, and performance improvements.
- Cooling Fan: The device is equipped with a cooling fan. Ensure the fan vents are not obstructed to prevent overheating.
6. Troubleshooting
6.1 Common Issues & Solutions
- Steering Wheel Control Not Working:
a. If no Canbus: Ensure manual learning steps (Section 3.4.1) are followed correctly.
b. If Canbus included: Verify the 8-pin Canbus cable is connected and the correct Canbus type is selected in "Car Settings > Factory > CarType Setting". If unsure, contact customer service. - Wireless CarPlay/Android Auto Connection Issues:
a. For first connection, ensure phone's Bluetooth is on and paired with the car's Bluetooth.
b. After pairing, the car radio should automatically jump to Zlink or AutoLink interface.
c. Ensure phone's Wi-Fi is turned on for CarPlay to connect. - Wired CarPlay/Android Auto Connection Issues:
a. Use your original data cable to connect the phone to the 4 PIN USB cable.
b. Enable CarPlay/Android Auto function on your phone.
c. Select the "AutoLink" or "ZLINK5" icon on the device to connect. - No GPS Signal (when not using CarPlay/Android Auto):
a. Ensure the GPS antenna is properly connected at the back of the unit.
b. Check for any obstructions that might block the GPS signal. - Boot Logo Cannot Be Changed:
Due to copyright issues, the logo may not be directly changeable. Contact customer service for methods to modify the logo if needed.
7. Specifications
The Junsun Car Navigation System comes in various configurations. Below are the general specifications and model-specific details:
7.1 General Specifications
| Feature | Specification |
|---|---|
| Brand Name | Junsun |
| Model Name | XT89 |
| Operating System | Android |
| Din | Double Din |
| Item Weight | 2kg |
| Voltage | 12 V |
| Out Power | 4*45W |
| Max External Memory | 256G |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| Interface | USB/RCA |
| TF/Micro SD Slot | 2 |
| Built-in DVD Player | No |
| Built-in CD Player | No |
| Is Touch Screen | Yes |
| Built-in Screen | Yes |
| Material | Composite Material |
| Certification | CE, EAC, FCC, RoHS, KC, WEEE |
| OSD Language | Multi-language support (Simplified Chinese, Traditional Chinese, Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galician, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spanish Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesian, English, Vietnamese) |
7.2 Model-Specific Specifications

| Feature | V1 Wifi (MTK8163) | V1 4G (MTK8581) | X9 (UIS7870) | V9 Pro (SDM450) |
|---|---|---|---|---|
| CPU | 4-Core 1.3 GHz | 8-Core 1.6 GHz | 8-Core 2.7 GHz | 8-Core 1.8 GHz |
| Display | IPS 1280*720P | IPS 1280*720P | QLED 2000*1200P | IPS 1280*720P |
| DSP | DSP 12EQ | DSP 48EQ | DSP 5.1DTS+36EQ | DSP 48EQ |
| Cooling Fan | No | Yes | Yes | Yes |
| Radio | FM-RDS | AM, FM-RDS | AM, FM-RDS | AM, FM-RDS |
| AMP IC | 7388 | 7388 | TDA7851 | TDA7851 |
| Radio Chip | 6625 | SI4755 | TDA7708 | SI4755 |
| Bluetooth | 4.1 | 5.0 | 5.0 | 5.0 |
| Camera Support | AHD/TVI 1080P, CVBS | AHD/TVI 1080P, CVBS | AHD/TVI 720P, CVBS | AHD/TVI 720P, CVBS, 360 |
7.3 Available Screen Sizes
The Junsun Car Radio is available in multiple screen sizes with varying resolutions:
- 9 inch (1280*720P HD)
- 9.5 inch (1280*720P HD)
- 10.1 inch (1280*720P HD)
- 11.5 inch (2000*1200P QLED)

8. User Tips
- Learning the System: Treat the radio like a musical instrument; it takes time to learn and master its features. Explore the settings and functions to get the most out of your device.
- Quick Start: The device connects very quickly upon starting the car, allowing for immediate use of features like navigation and music.
- Installation: The cables are plug-and-play, and the frame and cables generally fit perfectly for compatible models.
- Customer Service: If you encounter issues, especially with complex features like steering wheel controls or GPS signals, contact Junsun customer service for assistance. They are often helpful in resolving problems.
9. Warranty & Support
Junsun offers comprehensive support for its products:
- Warranty: 3-year warranty.
- Service: 24H*7 service support.
- Innovation and Updates: Junsun is committed to continuous innovation in hardware and software, providing free updates for firmware, software, UI, and navigation maps.
For further assistance, you can contact the manufacturer:
- Manufacturer: Shenzhen jinnaibo Electronic Co., Ltd
- Email: junsun888@163.com
This manual is for reference only. The manufacturer reserves the right to upgrade the product hardware, software, structure, and accessories without prior notice. Minor differences between the manual and the actual product due to technical updates shall not be regarded as product quality defects. The actual delivered product shall prevail.