Lemorele R1100 Wireless HDMI Transmitter and Receiver User Manual

1. Introduction

The Lemorele R1100 Wireless HDMI Transmitter and Receiver system provides high-definition audio and video transmission over a wireless 5GHz connection. Designed for professional and personal use, it supports 1080P@60Hz resolution with ultra-low latency, making it ideal for photography, live streaming, office meetings, education, and entertainment. The system offers flexible power options and multi-terminal monitoring capabilities.

Figure 1: Lemorele R1100 Wireless HDMI Transmitter (TX) and Receiver (RX)

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, please contact customer support.

• Transmitter (TX) x1
• Receiver (RX) x1
• Antenna x4
• Cold Shoe x1
• User Manual x1
• 100cm USB-C Cable x2

Note: Some packages may contain only one Receiver (RX) with two antennas and one USB-C cable if purchased separately. The RX unit cannot be used alone; it must be paired with a TX unit.

Figure 2: Typical Package Contents

3. Product Overview

Familiarize yourself with the components and ports of the Transmitter (TX) and Receiver (RX) units.

Figure 3: Transmitter (TX) and Receiver (RX) Unit Features

Transmitter (TX)

• HDMI Input: Connects to your video source (e.g., camera, PC).
• HDMI Output (Loop Out): Allows local monitoring of the input signal.
• USB-C Power Input: For 5V/2A power supply.
• NP-F Battery Slot: For portable power using NP-F series batteries (F970/F750/F550, not included).
• LCD Display: Shows status information.
• Threaded Hole: 1/4-inch for mounting accessories like the cold shoe.
• Power Button: To turn the unit on/off.
• Pairing Button: For establishing connection with RX units.

Figure 4: Transmitter (TX) Unit Diagram

Receiver (RX)

• HDMI Output: Connects to your display device (e.g., monitor, projector).
• USB-C Power Input: For 5V/2A power supply.
• NP-F Battery Slot: For portable power using NP-F series batteries (F970/F750/F550, not included).
• LCD Display: Shows status information.
• Threaded Hole: 1/4-inch for mounting accessories.
• Power Button: To turn the unit on/off.
• Pairing Button: For establishing connection with TX unit.

Figure 5: Receiver (RX) Unit Diagram

4. Setup Instructions

4.1. Antenna Installation

1. Carefully screw the provided antennas onto the antenna ports of both the TX and RX units.
2. Ensure they are securely tightened but do not overtighten.

4.2. Power Supply

The R1100 system supports two power supply methods:

• USB-C Power: Connect the provided USB-C cables to the USB-C power input ports on both TX and RX units, and then connect them to a 5V/2A power adapter (not included).
• NP-F Battery: Insert a compatible NP-F series battery (F970/F750/F550, not included) into the battery slot on the back of each unit.

Important: Always use a 5V/2A power supply to ensure optimal performance. Insufficient power can lead to connection issues, lags, or disconnections.

Figure 6: Power Supply Methods

4.3. Connecting the Transmitter (TX)

1. Connect your video source (e.g., camera, PC, game console) to the HDMI Input port of the TX unit using an HDMI cable.
2. (Optional) If you wish to monitor the input signal locally, connect a monitor to the HDMI Output (Loop Out) port of the TX unit.

Figure 7: Transmitter (TX) with HDMI Loop Out Support

4.4. Connecting the Receiver (RX)

1. Connect your display device (e.g., TV, projector, monitor) to the HDMI Output port of the RX unit using an HDMI cable.

4.5. Mounting (Optional)

The units feature a 1/4-inch threaded hole for mounting. Use the included cold shoe adapter to attach the units to cameras, cages, or other equipment.

Figure 8: Easy Cold Shoe Installation

5. Operating Instructions

5.1. Powering On and Initial Connection

1. Ensure both TX and RX units are powered on by pressing their respective power buttons.
2. If the TX and RX units were purchased together as a kit, they are usually pre-paired. The connection should establish automatically within 5-10 seconds.
3. If units were purchased separately or need re-pairing, press the pairing button on both units simultaneously until the connection is established. Refer to the LCD display for status indicators.

5.2. Multi-Terminal Monitoring

The system supports one Transmitter (TX) connecting to up to four Receivers (RX) simultaneously. This allows for monitoring from multiple perspectives, suitable for director, monitoring, or broadcasting needs.

Figure 9: Monitor Up to Four Devices

5.3. APP Monitoring (TUTUPlay)

For real-time screen monitoring on mobile devices, download the TUTUPlay app (available for iOS and Android). The TX unit can connect to up to four TUTUPlay apps as receivers.

1. Download and install the TUTUPlay app on your smartphone or tablet.
2. Ensure your mobile device is connected to the same 5GHz Wi-Fi network as the TX unit.
3. Open the TUTUPlay app and follow the in-app instructions to connect to the TX unit.

Figure 10: APP Monitor TuTuPlay

5.4. Seamless Channel Switch

The R1100 system utilizes 5GHz WiFi high-speed transmission technology with a seamless channel switch feature. This ensures stable connection and strong anti-interference, automatically selecting the best channel for optimal performance.

Figure 11: 5GHz Wi-Fi with 5DB Gain External Antenna

6. Maintenance

To ensure the longevity and optimal performance of your Lemorele R1100 system, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the units. Avoid using liquid cleaners or solvents.
• Storage: Store the units in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Ventilation: Ensure proper ventilation around the units during operation to prevent overheating. The units are designed with efficient cooling for stable wireless transmission.

Figure 12: Efficient Cooling for Stable Wireless Transmission

7. Troubleshooting

8. Specifications

Figure 13: Transmission Range and Latency

9. Warranty and Support

9.1. Warranty Information

This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2. Returns Policy

Free returns are available within 90 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.

9.3. Customer Support

For any questions, technical assistance, or warranty claims, please contact the Lemorele Official Store directly through the platform where you made your purchase. Our support team is available to assist you.

10. User Tips

• Optimal Power: Always ensure both the Transmitter and Receiver units are powered by a stable 5V/2A source to prevent connection issues and ensure smooth operation.
• Clear Line of Sight: For best performance and maximum transmission range, try to maintain a clear line of sight between the TX and RX units, minimizing physical obstructions.
• App Monitoring: Utilize the TUTUPlay app for convenient mobile monitoring, especially in dynamic shooting environments or when multiple viewing points are needed.
• Battery Management: If using NP-F batteries, keep spare charged batteries on hand for extended use, as they are not included and need to be purchased separately.