MEKEDE MN-X Series Car Central Display Multimedia Player User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE MN-X Series Car Central Display Multimedia Player. This system is designed to upgrade the in-car entertainment and navigation experience for compatible BMW models, integrating advanced features like Android Auto, CarPlay, GPS, and 4G connectivity while retaining original car functionalities.

MEKEDE MN-X Car Central Display for BMW E60 E90, showing main interface with Carplay, Android Auto, 8Core, 6+128GB, 1920*720, Android 12. — Figure 1: MEKEDE MN-X Car Central Display main interface.

2. Compatibility

The MEKEDE MN-X Series Car Central Display is compatible with the following BMW models and original systems:

BMW 5 Series: E60, E61, E63, E64 (2005-2008 with original CCC system)
BMW 5 Series: E60, E61, E63, E64 (2009-2010 with original CIC system)
BMW 3 Series: E90, E91, E92 (2005-2008 with original CCC system)
BMW 3 Series: E90, E91, E92 (2009-2012 with original CIC system)
The original car MASK system requires selection of the CCC system option.

Compatibility chart for BMW 5 Series E60 E61 E63 E64 and BMW 3 Series E90 E91 E92, showing CCC, CIC, NBT, EVO systems and corresponding LVDS connectors. — Figure 2: Compatibility chart and LVDS connector types.

3. Setup and Installation

3.1 Package Contents

Before beginning installation, please verify that all components are present:

Main Display Unit
Packaging Box
Power Cable
GPS Antenna
AUX Cable
4G Antenna
Microphone (MIC)
USB Cable

Package contents including the main unit, packaging box, power cable, GPS antenna, AUX cable, 4G antenna, MIC, and USB cable. — Figure 3: MEKEDE MN-X Series Package Contents.

3.2 Pre-Installation Checks

Original Audio System: Confirm that your original car system has 'AUDIO TO' options. This is crucial for sound output.
AUX IN Availability: If your original car does not have an AUX IN port, you will need to acquire an external AUX transmitter to enable sound output from the new display.

Note regarding AUX IN requirement for sound output, suggesting a $10 transmitter if AUX IN is not available. — Figure 4: AUX IN requirement for sound output.

3.3 Installation Overview

The installation process involves replacing your car's central display unit. Professional installation is recommended. The new display integrates seamlessly, retaining the aesthetic and functionality of your car's interior.

Comparison of car interior before and after installation of the MEKEDE MN-X display. — Figure 5: Before and After Installation.

Before and after installation comparison, showing the new display integrated into the dashboard. — Figure 6: Integrated display after installation.

4. Operating Instructions

4.1 Basic Navigation and UI

The system features a user-friendly interface with various applications and widgets. You can customize the UI style to your preference.

Main menu interface with various applications and widgets. — Figure 7: Main Menu Interface.

UI Style options (ID8, ID7, ID6, ID5) for the display interface. — Figure 8: Available UI Styles (ID8, ID7, ID6, ID5).

4.2 Dual System Switching

The MEKEDE MN-X allows seamless switching between your original car's system and the new Android 14 system. This ensures you can access all original car functions while also enjoying the advanced features of the Android system.

Dual system free switching, showing the original car system and Android 14 system interfaces side-by-side with a 'switch' button. — Figure 9: Dual System Free Switching.

4.3 CarPlay and Android Auto

The unit comes with built-in CarPlay and Android Auto functionality, eliminating the need for additional accessories.

Wireless Car-Play (iOS System):
1. Connect via Bluetooth (BT).
2. Click on 'Phone Link' and wait for connection.
3. CarPlay can also be connected via USB Cable.
Wireless + Wired Auto (Android System):
1. Connect your mobile phone and car DVD player with a USB cable.
2. Click on 'Phone Link' and wait for connection.

Built-in Carplay + Auto connection steps and features, including Wireless Car-Play (iOS) and Wireless+Wired Auto (Android). — Figure 10: CarPlay and Android Auto Connection.

4.4 Connectivity (4G LTE & WiFi)

The built-in 4G module allows you to stay connected to fast cellular data networks. Simply insert a 4G SIM card (optional) into the designated slot. You can also connect via WiFi without needing to use your phone's hotspot every time.

Built-in 4G LTE and WiFi module, showing SIM card slot for cellular data connection. — Figure 11: 4G LTE and WiFi Connectivity.

4.5 GPS Navigation

The system includes a built-in global positioning system with omni-directional map display for real-time traffic conditions and accurate positioning. Supported maps include Navitel, iGO, Yandex, and Google.

4.6 Split Screen Functionality

The display supports running two applications simultaneously, enhancing convenience and efficiency.

GPS Navigation with omni-directional map display and support for various maps (Navitel, iGO, Yandex, Google). Also shows split screen functionality. — Figure 12: GPS Navigation and Split Screen.

4.7 Digital Sound Processor (DSP)

A powerful DSP chip supports 32 equalizer adjustments, providing extensive control over various audio frequencies for an optimized sound experience.

DSP (Digital Sound Processor) with 32 EQ adjustments for sound control. — Figure 13: DSP 32 EQ Adjustments.

4.8 Car Information Display

The system can display various car information such as speed, fuel level, oil pressure, temperature, parking brake status, seat belt reminders, and door switch status on the dashboard.

Car information service condition display, showing speed, fuel level, oil pressure, temperature, parking brake, seat belt reminder, and door switch display. — Figure 14: Car Information Service Condition.

4.9 Retained Original Car Functions

The MEKEDE MN-X system ensures that essential original car functions remain operational after installation.

Original Radio System
Original CD Function
Steering Wheel Control
Original Reversing Image
i-Drive Control

Illustration of retained original car functions: radio, CD, steering wheel control, reversing image, and i-Drive control. — Figure 15: Retained Original Car Functions.

5. Optional Accessories

Enhance your driving experience with these optional accessories (sold separately):

5.1 AHD Reversing Video Camera

Supports AHD rear-view cameras for clearer picture quality than ordinary cameras. (Rear view camera not included).

AHD Reversing Video display, showing clear rear-view camera feed. Note: rear view camera is not included. — Figure 16: AHD Reversing Video.

5.2 ADAS DVR (Anti-collision Warning Driving Recorder)

Provides front vehicle distance prediction, anti-collision warning, lane departure warning, and front car start reminders to enhance driving safety. (DVR not included).

ADAS DVR (Anti-collision warning driving recorder) features: front vehicle distance prediction, anti-collision warning, lane departure warning, front car start reminder. Note: DVR is not included. — Figure 17: ADAS DVR Features.

5.3 OBD II (On-Board Diagnostics)

With an OBDII function, you can monitor real-time data and obtain fault codes from your vehicle's computer. (OBDII not included).

Support for OBD II (On-board diagnostics) to monitor car status. Note: OBDII is not included. — Figure 18: OBD II Support.

5.4 TPMS (Tire Pressure Monitoring System)

After correct installation, TPMS sensors automatically monitor tire pressure and temperature, displaying real-time statistics on the receiver. (TPMS not included).

Support for TPMS (Tire Pressure Monitoring System), showing external and built-in TPMS options. Note: TPMS is not included. — Figure 19: TPMS Support.

6. Maintenance

Cleaning: Use a soft, dry cloth to clean the display screen. Avoid abrasive cleaners or solvents.
Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Follow on-screen prompts for updates.
Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

7. Troubleshooting

7.1 No Sound Problem

If you experience no sound from the unit:

Connect the original car fiber optic cable to the interface of the conversion line, and then connect it to the host.
Connect 'AUX' and switch the mode to 'AUX'.
If your car does not have AUX IN, you will need an AUX audio cable or an external transmitter to connect.

'How To Solve No Sound Problem' diagram, showing fiber optic cable connection, AUX connection, and 'Audio OUT' to 'Audio IN' setup. — Figure 20: No Sound Problem Solution.

7.2 OEM Menu Display Issues / Resolution Setting

If the OEM menu shows symptoms like 'No Signal', vertical lines, or flashing, check the LVDS connector and adjust the original menu resolution.

Go to 'Setting'.
Select 'Personalized Setting'.
Adjust 'Resolution ratio'.

Ensure the display screen of the original car corresponds to the selected option, otherwise, the display quality may be poor.

'How To Set The Resolution?' guide, showing steps: 1. Setting, 2. Personalized Setting, 3. Resolution ratio. Also shows symptoms of OEM menu issues (no signal, flashing). — Figure 21: How to Set the Resolution.

7.3 iDrive Knob Control for CCC Systems

For cars with CCC systems, the metal iDrive knob may experience some control errors when rotating it in the Android menu. However, you can control the Android menu correctly by touching the screen. If this is a concern, consider a Qualcomm series unit which offers full compatibility. Cars with CIC NBT EVO systems can control all menus normally.

'Please note (Cars with CCC system)' image, explaining potential iDrive knob control errors in Android menu for CCC systems and suggesting Qualcomm series for full compatibility. — Figure 22: Note for CCC System iDrive Knob.

8. Specifications

Feature	Specification
Brand Name	MEKEDE
Operating System	Android 14
Processor	8-Core (MTK8781 1.3Ghz)
RAM + ROM (Example)	2GB + 64GB (for 1280x480 resolution), 4GB + 64GB, 6GB + 128GB, 8GB + 128GB (for 1920x720 resolution)
Display Size	8.8 inch, 12.3 inch
Resolution	1280x480 / 1920x720
Touch Screen	Yes
Built-in Screen	Yes
Built-in DVD Player	No
Built-in CD Player	No
TF/Micro SD Slot	1
Din	Double Din
Interface	Plug and Play
Out Power	4*45W
Voltage	12V
Item Weight	1.5kg
Item Size	8.8/12.3 inch
Output Type	Colored
Max External Memory	256G
Special Features	WiFi Function, Support 4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, CarPlay, Android Auto, Reversing Input, Support steering wheel control
Digital Media Format	Mp3, MP4, WMA, JPEG
OSD Language	Chinese (Simplified), Chinese (Traditional), Irish, Polish, Danish, Russian, Finnish, Korean, Dutch, Czech, Croatian, Latvian, Romanian, Japanese, Swedish, Slovak, Slovenian, THAI, Ukrainian, Spanish, English
Material	Plastic Hardware
Certification	CE
Built-in	GPS, Bluetooth, Wifi, 4G LTE module
Bracket for (Optional)	Carplay, Android Auto, rear camera, DVR, OBD, TPMS

9. User Tips

Confirm Car System: Always double-check if your car has a CCC, CIC, NBT, or EVO system before ordering to ensure compatibility.
Sound Output: If your car lacks an AUX IN port, remember to purchase an AUX transmitter for proper sound output.
iDrive Knob: For CCC systems, while the iDrive knob might have limited functionality in Android mode, the touchscreen provides full control.
Resolution Adjustment: If the original car menu displays incorrectly, try adjusting the resolution ratio in the settings.

10. Warranty and Support

The MEKEDE MN-X Series Car Central Display comes with a 365-day warranty.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or manufacturer directly. Provide your product model and a detailed description of the issue for efficient service.