1. Product Overview
The NEOECO GA02 is a dual-action airbrush engineered for creators who demand ultimate precision and ergonomic comfort. This next-generation airbrush merges a revolutionary design with superior performance, making it an ideal tool for various projects.
It features an angled ergonomic body, a self-centering threadless nozzle, a fixed air cap, and a square trigger for improved control. It is suitable for hobby modeling, illustration, miniature painting, and general airbrush applications.
Key Features:
- Ergonomic Wide Trigger for Maximum Comfort: The exclusive large square trigger features a greater contact surface, a matte non-slip finish, and follows your finger's natural curve. Integrated weight-reduction holes ensure a responsive feel, allowing for comfortable, fatigue-free painting for extended periods.
- Angled Ergonomic Grip Design: The angled body and curved tail handle are designed to fit perfectly against the base of your fingers, providing a more comfortable, secure grip. This design shifts the center of gravity for perfect balance, offering effortless control and stability.
- Perfect Balance for Effortless Control: With its center of gravity right in the middle, the airbrush can stand straight on a table, ensuring stable and precise operation.
- Auto-Centering Drop-in Nozzles: The innovative nozzle design features 3 air channels for superior atomization and airflow. The drop-in, self-centering system eliminates the need for tricky screw-in nozzles, ensuring perfect alignment every time. This design facilitates faster cleaning and guarantees consistent, reliable performance.
- Ultimate Versatility with Multiple Nozzle Sets: Comes complete with 0.2mm, 0.3mm, and 0.5mm needle and nozzle sets, allowing you to switch from hair-thin detail lines to broad, even coverage in seconds.
- Two Interchangeable Airbrush Caps:
- Fixed-Distance Cap: This unique two-prong cap acts as a physical guide to maintain a constant distance from the surface for perfectly uniform lines. It also protects the delicate needle tip, allowing you to work up close with confidence.
- Round Nozzle Cap: Provides complete protection for the needle, preventing it from being bent or damaged during use or storage.
2. Specifications
| Attribute | Value |
|---|---|
| Brand Name | NEOECO |
| Model Number | NCT-GA02 |
| Type | Mini Spray Gun |
| Application | Paint Spray Gun |
| Use | Home DIY |
| Power Type | Pneumatic |
| Feed Type | Gravity |
| Cup Volume | 9cc |
| Needle & Nozzle Sizes | 0.2mm, 0.3mm, 0.5mm |
| Battery Included | No |
| High-concerned chemical | None |
| Origin | Mainland China |
Package Dimensions:
- Length: 10 cm
- Width: 8 cm
- Height: 8 cm
- Weight: 0.26 kg
3. Package Contents
Your Neoeco Dual Action Airbrush Kit NCT-GA02 includes the following items:
- 1 x Neoeco Dual-Action Airbrush Body
- 1 x 0.2mm Needle & Nozzle Set
- 1 x 0.3mm Needle & Nozzle Set (Pre-installed)
- 1 x 0.5mm Needle & Nozzle Set
- 1 x Fixed-Distance Cap
- 1 x Round Nozzle Cap (Pre-installed)
4. Setup
4.1. Connecting to Air Source
- Ensure your air compressor is turned off and depressurized.
- Connect the airbrush to an air source using a standard air hose. Ensure all connections are secure to prevent air leaks.
4.2. Nozzle & Needle Installation
The 0.3mm needle and nozzle set comes pre-installed. To change or install a set:
- Ensure the airbrush is clean and depressurized.
- Gently unscrew the rear handle and needle chucking guide.
- Carefully remove the existing needle from the rear.
- Unscrew the nozzle cap and then the nozzle from the front of the airbrush.
- Place the desired self-centering threadless nozzle into position carefully at the front of the airbrush.
- Install the appropriate nozzle cap (Fixed-Distance or Round) securely. Do not overtighten.
- Insert the new needle gently from the rear of the airbrush until it seats properly.
- Tighten the needle chucking guide and replace the rear handle.
5. Operating Instructions
- Prepare your paint by thinning it to the appropriate consistency for airbrushing.
- Add the properly thinned paint into the airbrush cup.
- Turn on your air compressor and set the desired air pressure.
- To begin spraying, press down on the trigger to release air.
- While holding the trigger down, pull it back to control the paint flow. The further back you pull, the more paint will be released.
- Adjust the spraying distance and trigger movement for desired results, such as fine lines or broad coverage.
- When finished, release the trigger to stop paint flow, then release the air.
6. Cleaning & Maintenance
Proper cleaning after each use is crucial for maintaining the performance and longevity of your airbrush.
- Empty any remaining paint from the cup.
- Flush the airbrush by spraying appropriate cleaner or water (for water-based paints) through it until the spray runs clear.
- Remove the needle carefully from the rear and wipe it clean with a soft cloth and cleaner. Do not force the needle during removal or installation.
- Unscrew the nozzle cap and nozzle. Clean these parts thoroughly with a brush and cleaner.
- Clean the paint cup and airbrush body.
- Reassemble the airbrush, ensuring all parts are dry.
- Avoid soaking seals for long periods, as this can cause damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No paint flow or sputtering | Clogged nozzle/needle, paint too thick, low air pressure. | Clean nozzle/needle thoroughly. Thin paint properly. Increase air pressure. |
| Air bubbles in paint cup | Loose nozzle, damaged nozzle, bent needle tip. | Tighten nozzle. Inspect and replace damaged parts. Straighten or replace needle. |
| Inconsistent spray pattern | Partially clogged airbrush, uneven paint thinning, damaged needle/nozzle. | Perform a deep clean. Ensure paint is consistently thinned. Check for damage. |
| Air leaks | Loose connections, worn O-rings. | Check all connections for tightness. Inspect and replace O-rings if necessary. |
8. User Tips
- Paint Thinning is Key: Always ensure your paint is thinned to a milk-like consistency for optimal flow and atomization. Test on a scrap surface before applying to your main project.
- Practice Makes Perfect: Spend time practicing on various surfaces to get a feel for the airbrush's response to trigger control and distance.
- Immediate Cleaning: Clean your airbrush immediately after each use, especially when switching colors or finishing a session, to prevent paint from drying and clogging.
- Gentle Handling: The needle and nozzle are delicate components. Handle them with care during installation and cleaning to avoid bending or damage.
- Experiment with Caps: Utilize both the Fixed-Distance Cap for precise, uniform lines and the Round Nozzle Cap for general protection and broader sprays.
9. Storage
After cleaning and ensuring all parts are dry, store your airbrush in a dry, clean place. Keep the needle protected when not in use, ideally within the airbrush or in a protective tube.
10. Warranty & Support
For detailed warranty information and customer support, please refer to the official product documentation or contact NEOECO customer service.
A digital version of the user manual (PDF) can be viewed here.
11. Disclaimer
Improper use, incorrect paint thinning, or lack of cleaning may affect the performance and lifespan of the airbrush. The manufacturer is not responsible for damage caused by misuse or unauthorized modification of the product.
CE Certified
