1. Introduction
Thank you for choosing the Fieryzeal Mini 100W RGB COB LED Spotlight. This professional stage and DJ lighting fixture is designed to deliver vibrant and versatile illumination for various events, including parties, weddings, and shows. This manual provides essential information for the safe and effective operation, installation, and maintenance of your new spotlight. Please read it thoroughly before use and retain it for future reference.
2. Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- Lamp: 1 unit
- Handle: 1 unit
- Knob + Gasket: 2 sets
- Instruction Manual: 1 unit
3. Product Overview
The Fieryzeal Mini 100W RGB COB LED Spotlight features a compact and durable design with intuitive controls. Key components include the adjustable spot size lens, RGB COB LED, rotary focus, and a rear control panel with a 4-digit digital display, DMX input/output, and power connection.
4. Setup
4.1 Mounting the Spotlight
- Attach the provided handle to the spotlight using the knobs and gaskets.
- Ensure the handle is securely fastened to allow for safe positioning.
- Mount the spotlight to a stable surface or truss using appropriate clamps (not included) and safety cables. Ensure the mounting location can support the weight of the fixture.
4.2 Power Connection
- Connect the power cable to the 'POWER' input on the rear panel of the spotlight.
- Plug the other end of the power cable into a compatible AC power outlet (AC100V-240V 50/60Hz).
- Ensure the power source matches the specified voltage and frequency.
4.3 DMX Connection (Optional)
For DMX control, connect your DMX controller to the 'DMX IN' port using a 3-core XLR cable. If linking multiple units, connect the 'DMX OUT' of the first unit to the 'DMX IN' of the next unit in the chain.
5. Operating Instructions
5.1 Digital Display and Menu Navigation
The spotlight features a 4-digit digital display on the rear panel for easy configuration. Use the 'MENU', 'UP', 'DOWN', and 'ENTER' buttons to navigate through settings and select desired modes.
5.2 Operation Modes
The spotlight supports the following operation modes:
- Auto-run Mode: The fixture runs through pre-programmed light shows automatically.
- Sound-Activated Mode: The light effects respond to ambient sound or music.
- Master/Slave Mode: Link multiple units where one acts as the master, controlling the others (slaves).
- DMX Mode: Control the fixture using an external DMX512 controller. The spotlight uses 7 control channels.
5.3 Adjusting Focus and Spot Size
The spotlight features manual focus and spot size adjustment. Rotate the lens barrel to achieve a sharp or soft focus. Use the adjustment mechanism on the top of the fixture to change the beam from a narrow spotlight to a wide floodlight.
5.4 Color Mixing and Dynamic Effects
The 120W RGB COB LED allows for full-color mixing. The fixture supports various dynamic effects with adjustable speed:
- Jump Mode: Instantaneous color changes.
- Gradient Mode: Smooth transitions between colors.
- Pulse Mode: Rhythmic changes in light intensity.
- Strobe Mode: Rapid flashing effect (1-13Hz).
5.5 Dimming
The spotlight offers 0-100% linear dimming for precise control over light intensity.
6. Maintenance
6.1 Cleaning
Regular cleaning of the lens and housing is recommended to maintain optimal light output and prevent overheating. Use a soft, lint-free cloth. For stubborn dirt, a mild cleaning solution can be applied to the cloth, not directly to the fixture.
6.2 Storage
When not in use, store the spotlight in a dry, dust-free environment. Protect it from extreme temperatures and physical impact.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected or faulty outlet. | Check power cable connection. Test outlet with another device. |
| No light output | Fixture in standby mode, dimming set to 0%, or internal fault. | Check display for error codes. Increase dimming level. Restart fixture. |
| No DMX control | Incorrect DMX address, faulty DMX cable, or incorrect mode. | Verify DMX address and mode settings. Check DMX cable connections. Try a different DMX cable. |
| Overheating | Blocked ventilation or high ambient temperature. | Ensure ventilation openings are clear. Operate within specified temperature range (-20°C to 40°C). |
8. Specifications
| Parameter | Value |
|---|---|
| Input Voltage | AC100V-240V 50/60Hz |
| Rated Power | 120W |
| Light Source | 1 x 120W (RGB) COB LED |
| Light Output Angle | 25° |
| Optimal Throw Distance | 3-10m |
| Average LED Lifespan | 10,000 hours |
| Dimming Curve | 0-100% Linear Dimming |
| Flicker Rate | 1-13Hz |
| Focus | Manual |
| Spot Size Adjustment | Manual |
| Operation Modes | Auto, Sound-Activated, Master/Slave, DMX |
| Control Channels | 7CH |
| Protocol | Standard DMX512 protocol |
| Data Connection | 3-core XLR input/output |
| Display | 4-digit Digital Display |
| Ingress Protection | IP20 |
| Operating Environment | -20°C to 40°C |
| Material | Aluminum/Steel/Plastic |
| Product Size | 32.5 x 17 x 21 cm (12.8 x 6.7 x 8.3 in) |
| Net Weight | 1.9 kg (4.2 lbs) |
9. User Tips
- For optimal performance in DMX mode, ensure all DMX cables are in good condition and properly terminated.
- Experiment with different focus and spot size settings to achieve desired lighting effects for various stage layouts or art installations.
- When using multiple units in Master/Slave mode, set the master unit first, then connect and power on the slave units.
- Always allow adequate ventilation around the fixture to prevent overheating and ensure longevity of the LED.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please contact Fieryzeal Official Store directly. Keep your purchase receipt as proof of purchase.
