Raise Canbus Box RZ-VW08/RZ-VW58 User Manual

1. Introduction

Thank you for choosing the Raise Canbus Box RZ-VW08 or RZ-VW58. This device is designed to integrate your Android 16 Pin Car Player with the existing Canbus system of your Volkswagen, Skoda, or Seat vehicle. It enables features such as steering wheel controls, door status display, air conditioning information, and other vehicle data to be displayed and controlled via your Android head unit. Please read this manual carefully before installation and operation to ensure proper functionality and safety.

2. Product Components

The package typically includes the following items:

• Raise Canbus Decoder Box (RZ-VW08 or RZ-VW58)
• 16-Pin Wiring Harness

3. Specifications

4. Installation Guide

It is highly recommended to have this product installed by a qualified professional to avoid damage to your vehicle or the device.

4.1. Pre-installation Checks

• Ensure your vehicle is compatible with the RZ-VW08 or RZ-VW58 Canbus box.
• Turn off your vehicle's ignition and disconnect the car battery to prevent electrical shorts.
• Carefully remove your existing car radio/head unit.

4.2. Wiring Connection

1. Locate the 16-pin connector from your Android car player.
2. Connect the provided 16-pin wiring harness to your Android car player.
3. Connect the other end of the wiring harness to the corresponding port on the Raise Canbus Box.
4. Connect the vehicle's original wiring harness to the appropriate connectors on the new 16-pin harness. Ensure all connections are secure.

4.3. Securing the Canbus Box

Find a suitable, secure location behind the dashboard to place the Canbus box, ensuring it does not interfere with other components or wiring. Reinstall your Android car player and reconnect the car battery.

5. Operation and Configuration

After installation, you may need to configure the Canbus settings on your Android car player.

5.1. Canbus Version Update (if necessary)

It is crucial to ensure your Canbus version is up to date for optimal performance. Follow these steps:

1. On your Android car player, navigate to the Settings menu.
2. Look for an option related to System Updates or Canbus Updates.
3. Select Check for Updates. If a new version is available, follow the on-screen prompts to update.
4. Verify the current Canbus version in the settings.

5.2. Protocol Setting and Model Selection

If the Canbus box is not automatically detected or functions are not working correctly, you may need to manually set the protocol:

1. From the main menu of your Android car player, go to Car Info or Settings.
2. Find Protocol Setting or Custom Set.
3. You may be prompted to enter an administration password. If you do not have it, contact your seller.
4. Once inside, select the correct vehicle model from the list (e.g., Volkswagen, Skoda, Seat, and specific models like Golf, Passat, Jetta, Tiguan, Touran).
5. The system may restart after selecting the model.

5.3. Steering Wheel Control Learning

To enable your steering wheel controls with the new Android player:

1. After setting the Canbus protocol, navigate to the Steering Wheel Learning or Steering Wheel Key application on your Android player.
2. The screen will display various functions (e.g., Volume+, Volume-, Mode, Power).
3. Select a function on the screen (e.g., "Volume+").
4. Press and hold the corresponding button on your vehicle's steering wheel. The system should register the input.
5. Repeat this process for all desired steering wheel buttons.
6. Once all buttons are assigned, press Save to store the configuration.

6. Troubleshooting

6.1. No Power to Android Player

• Check all wiring connections, especially the main power and ground wires.
• Ensure the car battery is properly reconnected.
• Verify that the vehicle's fuse for the radio/head unit is intact.

6.2. Steering Wheel Controls Not Working

• Confirm that the Canbus protocol is correctly set for your vehicle model (refer to Section 5.2).
• Repeat the steering wheel learning process (refer to Section 5.3).
• Ensure the Canbus box is securely connected to the wiring harness.

6.3. Vehicle Information (e.g., Door Status, AC) Not Displaying

• Check the Canbus version and update if necessary (refer to Section 5.1).
• Verify the correct vehicle protocol is selected in the settings (refer to Section 5.2).
• Ensure all connections to the Canbus box and car player are firm.

6.4. Intermittent Functionality

• Loose connections are a common cause. Recheck all wiring.
• Ensure the Canbus box is not overheating or being interfered with by other electrical components.

7. Maintenance

The Raise Canbus Box is designed for maintenance-free operation. However, to ensure longevity:

• Keep the area around the Canbus box clean and free from dust or debris.
• Avoid exposing the unit to extreme temperatures or moisture.
• Periodically check wiring connections for any signs of wear or looseness.

8. User Tips

No specific user tips were available from the provided data. Always ensure your Android car player's firmware is up-to-date for the best compatibility with the Canbus box.

9. Warranty and Support

For warranty information, technical support, or any issues not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.