RAVEMEN FR1000

Contents

RAVEMEN FR1000 Bike Headlight User Manual

Model: FR1000

1. Introduction

Thank you for purchasing the RAVEMEN FR1000 Bike Headlight. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new bike light. Please read this manual thoroughly before use and keep it for future reference.

Safety Warnings

  • The FR1000 contains a Li-Polymer/Li-ion battery. Do not put the light into fire.
  • Charge the device with a qualified USB power adapter and ensure the charging port is dry and clean before and during charging.
  • Do not look directly into the light beam to avoid eye injury.

2. Package Contents

Please check the package to ensure all items are present:

  • 1 x Ravemen FR1000 Light (Standard compatible with GARMIN)
  • 1 x ABM20 Handlebar Bracket (for 31.8mm and 35mm diameters Round handlebar)
  • 1 x Adapter compatible with Wahoo
  • 1 x Adapter compatible with Bryton
  • 1 x AGX03 Adapter compatible with GOPRO
  • 1 x USB-C Charging Cable
  • 1 x C-Micro USB Charging Cable
  • 1 x User Manual
  • 1 x AGM04 Adapter (Free gift)
  • 1 x Thick silicone shim
  • 1 x Thin silicone shim
Package contents of RAVEMEN FR1000 Bike Headlight
Image: Contents of the FR1000 package, including the light, handlebar bracket, various adapters, and charging cables.

3. Setup

3.1 Handlebar Bracket Installation

The ABM20 Handlebar Bracket is suitable for 31.8mm and 35mm diameter round handlebars. Use the provided silicone shims to ensure a snug fit for your handlebar size.

  1. Select the appropriate silicone shim (thick or thin) for your handlebar diameter.
  2. Place the shim around your handlebar at the desired mounting position.
  3. Position the ABM20 bracket over the shim and handlebar.
  4. Tighten the screw on the bracket with the provided hex key until it is securely fastened.
Diagram showing handlebar bracket installation with silicone shims and hex key
Image: Detailed diagram for installing the handlebar bracket, including shims and tightening the screw.

3.2 Mounting the Light and Bike Computer

The FR1000 features an integrated design, serving as both a headlight and a bike computer bracket. It is compatible with Garmin, Wahoo, and Bryton bike computers using the provided adapters.

  1. Slide the FR1000 light onto the ABM20 handlebar bracket until it clicks into place.
  2. Attach the appropriate adapter (Garmin, Wahoo, or Bryton) to the top of the FR1000 light.
  3. Mount your bike computer onto the adapter.
Integrated design of bike light and computer bracket
Image: The FR1000 light with a bike computer mounted on top, showcasing the integrated design.
Detachable quick release mechanism for the bike light
Image: Hands demonstrating the quick release mechanism of the FR1000 light from its mount.

3.3 Attaching GoPro Interface Accessories

The FR1000 includes a detachable AGX03 adapter for GoPro, allowing you to easily attach action cameras or other compatible devices below the light.

GoPro interface accessories attached to the bike light
Image: The FR1000 with a GoPro camera attached via the AGX03 adapter.

4. Operating Instructions

4.1 Power Button and Mode Selection

The power button controls the light's on/off state and cycling through modes.

  • Turn On/Off: Press and hold the power button for 1.5 seconds.
  • Cycle Modes: Click the power button to switch between different brightness and flashing modes.

4.2 Lighting Modes and Run Time

FR1000 Lighting Modes
ModeBrightness (lumens)Run Time (hours)
High10002.5
Mid5003.5
Low3007
Eco15010
Pulse Flashing50039

Note: Lab testing data. Run times may vary by environment and user conditions.

Night illumination with 1000 lumens
Image: The FR1000 providing 1000 lumens of high brightness for night cycling.
Daytime warning flash with 500 lumens
Image: The FR1000 in daytime warning mode, emitting a 500-lumen flash for increased visibility.

4.3 Auto On-Off Mode (Intelligent Sensing)

This mode automatically manages the light to save battery and extend runtime.

  • Activate: When the light is off, press and hold the power button for 3 seconds until the light blinks quickly.
  • Functionality: In this mode, the light will automatically turn off after being stationary for 2 minutes and will turn on with a vibration when you start riding again.
  • Exit: To exit this mode, turn off the light and then press and hold the power button again for 3 seconds until the light blinks slowly.
Auto On-off Mode illustration
Image: Illustration of the auto on-off mode, showing the light turning off after 2 minutes of stillness and turning on with movement.

4.4 Mode Memory Function

The FR1000 remembers the last used mode when it is switched off, ensuring you don't have to re-select your preferred mode each time you turn it on.

4.5 Battery Indicator

You can check the battery status without turning on the light:

  • When the light is off, single-click the power button to activate the battery indicator.
  • Green light: 40%-100% battery remaining.
  • Red light: 5%-40% battery remaining.
  • Flashing red light: Less than 5% battery remaining. Charge your light soon.
Battery status indicator on the bike light
Image: The power button illuminating to indicate battery status (green, red, flashing red).

4.6 USB-C Charging and Power Bank Functionality

The FR1000 features a universal USB-C port for charging and can also function as a power bank.

  • Charging Input: 5V, DC/1A. Standard charging time is approximately 2.7 hours.
  • Power Bank Output: 5V, DC/1A. Can provide emergency charging for bike computers and mobile phones.
  • Charging Indicator: Blinking red light indicates charging; a solid green light indicates fully charged.
  • Usage as Power Bank: When used as a power bank, the light can be turned on simultaneously, but medium and high brightness modes cannot be used.
  • Important: Always connect the bike computer first when using the power bank function.
Bike light charging a Garmin bike computer
Image: The FR1000 connected via USB-C cable to a Garmin bike computer, demonstrating its power bank functionality.
Universal USB-C port on the bike light
Image: Close-up of the FR1000's USB-C charging port and power indicator lights.

Video: A demonstration of the RAVEMEN FR1000's features, including mounting, light modes, and power bank function.

5. Maintenance

  • Keep the charging port dry and clean at all times.
  • Ensure the charging port cover is securely tightened before any outdoor biking, especially in wet conditions, to maintain IPX6 waterproof rating.
  • Clean the light's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Store the light in a cool, dry place when not in use for extended periods.
IPX6 Waterproof bike light in rain
Image: The FR1000 bike light being exposed to water, illustrating its IPX6 waterproof rating.
Aluminum alloy heat-dissipation design
Image: Close-up of the FR1000's aluminum alloy body with deep cooling fins for heat dissipation.

6. Troubleshooting

6.1 Light Not Charging

  • Issue: The FR1000 is not charging or charging slowly.
  • Solution: Due to varying charging protocols, some fast chargers may not be compatible. Try using a different qualified USB charger or charging cable. Ensure the charging port is clean and free of debris.

6.2 Light Not Turning On/Off Automatically

  • Issue: The auto on-off mode is not functioning as expected.
  • Solution: Ensure the auto on-off mode is correctly activated (light blinks quickly when turned off). If it's not working, try deactivating and reactivating the mode.

7. Specifications

FeatureDetail
LEDHigh-efficiency LED
Battery3000mAh/3.7V rechargeable Li-polymer battery
Dimensions (Headlight)108mm (L) x 39.8mm (W) x 34.5mm (H)
Weight (Headlight)130g
Body MaterialAluminum alloy
Power SupplyBattery
Mounting PlacementHandlebar
Support Dimmer5 - 8 Files (modes)
Intelligent SensingYes
Beam Distance140 meters
Water ResistanceIPX6
Impact Resistance1 meter
CertificationCE, FCC, RoHS

8. User Tips

  • The FR1000 is noted for its powerful illumination, making it ideal for night riding.
  • Its compact design and integrated mounting platform allow for a neat setup, combining the light with a bike computer (Garmin, Wahoo, Bryton) and even an action camera (GoPro) on a single handlebar bracket.
  • The light intensity and durability are highly regarded by users.
  • Utilize the power bank feature for emergency charging of your bike computer or smartphone during longer rides.

9. Warranty and Support

9.1 Warranty Policy

  • Product Warranty: Two years from the date of purchase for defects in material and workmanship under normal use.
  • Accessories & Battery Warranty: One year.
  • Support: Limited lifetime warranty support.

9.2 Warranty Exclusions

The warranty does not cover:

  • Normal wear and tear, and normal battery deterioration.
  • Improper use and maintenance, unauthorized modifications or alterations.
  • Lack of a sales receipt or proof of purchase.

9.3 Contact for Warranty Service

For warranty service, please contact the seller or RAVEMEN directly at: service@ravemen.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.