1. Introduction
Thank you for choosing the FNNEMGE 6500A Jump Starter Power Bank with 160PSI Air Compressor. This versatile device is designed to provide reliable emergency jump starting for your vehicle, inflate tires, and serve as a portable power bank for your electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.
Image 1.1: FNNEMGE Jump Starter Power Bank with Air Compressor and accessories.
2. Safety Information
Your safety is paramount. This device incorporates 10 intelligent protection mechanisms to ensure safe operation. Always follow these guidelines:
- Do not expose the device to extreme temperatures or direct sunlight.
- Do not disassemble or modify the device.
- Keep out of reach of children.
- Ensure proper connection polarity when jump starting.
- Avoid contact with water or other liquids.
- If the device becomes excessively hot during use, discontinue operation immediately.
2.1. Advanced Safety Protections
The FNNEMGE Jump Starter is equipped with the following safety features:
- Spark Proof Protection
- Zero Damage Protection
- Low Voltage Protection
- High Temp Protection
- Short Circuit Protection
- Reverse Polarity Protection
- Reverse Over Voltage Protection
- Reverse Current Protection
- Over Voltage Guard
- Over Charge Protection
Image 2.1: Detailed list of 10 Ultrasafety Advanced Protections.
3. Package Contents
Please check the package for the following items:
- FNNEMGE Jump Starter Power Bank
- Jump Leads (Smart Clamps)
- Inflator Hose
- USB-C Cable
- 3 Valve Adapters
- EVA Carrying Case
- User Manual
Image 3.1: Contents of the FNNEMGE Jump Starter kit.
4. Product Overview
Familiarize yourself with the components and controls of your FNNEMGE Jump Starter:
Image 4.1: Function Description of the FNNEMGE Jump Starter.
4.1. Device Components
- EC5 Port: For connecting the jump leads.
- LCD Display: Shows battery level, pressure readings (PSI, BAR, KPA, Kg/cm²), and operating status.
- Air-filled Hole: Air outlet for the compressor.
- LED Light: Multi-mode flashlight.
- Main Power Switch: Turns the device on/off.
- Straw Hat Lamp: Additional small lamp beads for mode switching.
- Type-C In Port: For charging the jump starter itself.
- USB 1 Out Port: For charging external electronic devices.
4.2. Control Buttons
- M (Mode) Button: Selects inflation units (PSI, BAR, KPA, Kg/cm²).
- OK Button: Confirms selections or starts/stops inflation.
- "-" Button: Decreases pressure value or navigates menus.
- Light Button: Short press to activate lower white light panel (400 lumens). Long press to turn on upper small lamp beads and switch between Lighting, SOS, and Strobe modes.
- "+" Button: Increases pressure value or navigates menus.
5. Charging the Device
Before first use, fully charge the FNNEMGE Jump Starter. Use the provided USB-C cable to connect the device's Type-C In Port to a suitable USB power adapter (not included). The LCD display will indicate the charging status. A full charge typically takes 3-4 hours.
6. Operating Instructions
6.1. Jump Starting a Vehicle
Ensure the jump starter is sufficiently charged before attempting to jump start a vehicle.
- Connect the jump start cable to the EC5 port on the jump starter. Ensure the connection is firm.
- Connect the red clamp to the positive (+) terminal of the car battery and the black clamp to the negative (-) terminal.
- Start the engine of your vehicle.
- Once the car starts, remove the clamps from the car battery, then disconnect the jump start cable from the jump starter.
Image 6.1: Step-by-step guide for jump starting a car.
Video 6.1: Demonstration of jump starting a car and inflating a tire.
6.2. Using the Air Compressor (Tire Inflation)
The built-in air compressor can inflate tires up to 160 PSI.
- Assemble the flexible hose to the air-filled hole on the jump starter.
- Connect the hose to the car tire valve.
- Set the desired inflation mode (PSI, BAR, KPA, Kg/cm²) using the 'M' button and adjust the inflation amount using the '+' and '-' buttons.
- Press the 'OK' button to start working. The compressor will automatically stop when the preset pressure is reached.
Image 6.2: Step-by-step guide for tire inflation.
Image 6.3: Cordless tire inflator with accurate pressure display.
6.3. Using as a Power Bank
The 26800mAh capacity allows you to charge various electronic devices.
- Connect your device (smartphone, tablet, camera, etc.) to the USB 1 Out Port using a compatible USB cable.
- The jump starter will automatically begin charging your device.
Image 6.4: FNNEMGE Jump Starter charging a smartphone and smartwatch.
6.4. Using the LED Light
The device features dual LED light sources with multiple modes for various situations.
- Short Press Light Button: Activates the lower white light panel (400 lumens) for general illumination.
- Long Press Light Button: Turns on the upper small lamp beads and cycles through the following modes:
- Lighting Mode: For basic illumination in dark environments.
- SOS Mode: Emits an SOS signal for emergencies.
- Strobe Mode: Provides a flashing light for warning or attention.
Image 6.5: LED light modes: Lumination, SOS, and Strobe.
7. Maintenance
- Store the device in a cool, dry place away from direct sunlight and moisture.
- Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Keep the ports free from dust and debris.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle won't jump start | Low battery on jump starter; incorrect clamp connection; severely discharged car battery. | Ensure jump starter is fully charged. Check clamp polarity (+ to +, - to -). For deeply discharged batteries, try the dual-start guarantee feature (refer to specific instructions if available, or try multiple attempts). |
| Air compressor not inflating | Hose not properly connected; incorrect pressure setting; device not powered on. | Ensure hose is securely attached to both the device and tire valve. Check pressure settings on the LCD. Turn on the device and press OK to start. |
| Device not charging external electronics | USB cable faulty; device battery low; external device not compatible. | Try a different USB cable. Ensure the jump starter has sufficient charge. Verify compatibility of the external device. |
| LCD display shows error/warning | Overheating/under-temperature; internal fault. | Allow the device to cool down or warm up to operating temperature. If the error persists, contact customer service. |
9. Specifications
| Feature | Specification |
|---|---|
| Peak Current | 6500A |
| Battery Capacity | 26800mAh |
| Air Compressor Max Pressure | 160 PSI |
| Air Flow Volume | 35 L/min |
| Engine Compatibility | All Gasoline Engines, up to 10.0L Diesel Engines (12V vehicles) |
| Voltage | 12 V |
| LED Light Output | 400 Lumens (lower panel) |
| Special Features | USB Output, Lighting, Warning Light, SOS Lighting |
| Item Weight | 1100 g |
| Dimensions (L x W x H) | 25 cm x 16 cm x 12 cm |
| External Testing Certification | ROHS, FCC, CE, UL |
| Number of Built-in Batteries | 5 |
| Conversion Rate | >90% |
10. User Tips
- A fully charged unit can jump start a car approximately 60 times.
- The automatic memory mode for tire inflation means you don't need to reset your preferred pressure value each time.
- Always ensure the jump starter is fully charged before long trips or storing it in your vehicle for emergencies.
11. Warranty & Support
The FNNEMGE Jump Starter Power Bank comes with a 24-Month Warranty. For any questions, technical assistance, or warranty claims, please contact FNNEMGE customer service. They offer 24/7 friendly customer service to assist you.
