1. Introduction
Thank you for choosing the SUITU ST-6699APlus Wireless Handheld Car Vacuum Cleaner. This versatile device combines powerful suction, effective blowing, and convenient inflation functions in a compact, portable design. Designed for ease of use and efficiency, it is ideal for cleaning car interiors, inflating small items, and blowing away dust from various surfaces. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Package Contents
Please check the package for the following items:
- 1 x SUITU ST-6699APlus Main Unit (Wireless Handheld Vacuum Cleaner)
- 1 x Long Flat Nozzle (for suction)
- 1 x Blower Nozzle (for blowing)
- 1 x Suction Brush (for suction)
- 1 x HEPA Filter (pre-installed or spare)
- 1 x Type-C Charging Cable
- 1 x Floor Brush (for suction, if included in your specific package)
- Inflation Nozzles (various sizes for different inflatables)
3. Specifications
| Feature | Specification |
|---|---|
| Product Model | ST-6699APlus |
| Product Material | ABS |
| Dimensions (L x W x H) | 28.5 x 6 x 6 cm |
| Bare Metal Weight | Approx. 460g |
| Motor Power | 100W (Max) |
| Motor Speed | 80000 RPM |
| Vacuum Degree | High-grade: 16KPa, Mid-range: 12KPa, Low-grade: 6KPa (Max 15000Pa) |
| Airflow | 680 L/min (Three gears) |
| Battery Capacity | 3 x 2000mAh (18650 Lithium Battery) |
| Rated Voltage | 11.1V |
| Charging Interface | Type-C |
| Input Voltage (Charging) | 5V 1.5A |
| Charging Time | Approx. 3-3.5 hours |
| Battery Life (Vacuuming) | Low-end: ~30 mins, Mid-range: ~18 mins, High-end: ~12 mins |
| Working Temperature | -10℃ to 50℃ |
4. Setup
Before first use, ensure the device is fully charged. The charging indicator will show three green grids when fully charged.
4.1 Attaching the Dust Cup
- Hold the main unit firmly.
- Align the dust cup with the main unit and twist clockwise until it clicks securely into place.
4.2 Attaching Nozzles
The device supports various nozzles for different functions:
- For Suction: Attach the Long Flat Nozzle, Suction Brush, or Floor Brush to the front (suction) end of the vacuum cleaner.
- For Blowing: Attach the Blower Nozzle to the rear (blowing) end of the vacuum cleaner.
- For Inflation: Attach the appropriate inflation nozzle to the rear (blowing) end of the vacuum cleaner.
5. Operating Instructions
5.1 Power On/Off and Speed Adjustment
- Press the power button once to turn on the device at the lowest speed setting.
- Press the power button again to cycle through the speed settings (Low, Mid, High). The display will show the current power level (35W, 75W, 100W) and battery status.
- Press and hold the power button to turn off the device.
5.2 Suction Function (Vacuuming)
- Attach the desired suction nozzle (e.g., Long Flat Nozzle for crevices, Suction Brush for upholstered surfaces).
- Turn on the device and select the appropriate speed.
- Direct the nozzle towards the area to be cleaned. The powerful suction (up to 16KPa) can effectively pick up dust, crumbs, pet hair, and small debris.
5.3 Blowing Function
- Attach the Blower Nozzle to the rear end of the device.
- Turn on the device and select the desired speed.
- Use the powerful airflow (up to 680 L/min) to blow away dust from keyboards, car air vents, or to assist in starting outdoor fires.
5.4 Inflation Function
- Attach the appropriate inflation nozzle to the rear end of the device.
- Turn on the device.
- Connect the nozzle to the inflatable item (e.g., balloons, swimming rings, small inflatable boats) and allow it to inflate.
5.5 Vacuum Sealing Function (with appropriate nozzle)
The device can also be used for vacuum sealing storage bags:
- Attach the vacuum sealing nozzle (if included) to the rear end of the device.
- Connect the nozzle to the valve of a vacuum storage bag.
- Turn on the device to extract air from the bag.
6. Maintenance
6.1 Emptying the Dust Cup
- Ensure the device is turned off.
- Twist the dust cup counter-clockwise to detach it from the main unit.
- Open the dust cup lid (one-key dust dumping feature) and empty the collected debris into a trash bin.
- Close the lid and reattach the dust cup to the main unit.
6.2 Cleaning the HEPA Filter
- Remove the dust cup as described above.
- Carefully remove the HEPA filter from inside the dust cup.
- Tap the filter gently to remove loose dust. For a more thorough clean, rinse the filter under running water.
- Important: Ensure the HEPA filter is completely dry before reinserting it into the dust cup and reattaching it to the main unit. A wet filter can damage the motor.
6.3 General Cleaning
- Wipe the exterior of the device with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place away from direct sunlight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or no charge. | Charge the device fully using the provided Type-C cable. |
| Weak suction/blowing power. |
|
|
| Device stops unexpectedly. | Overheating or low battery. | Allow the device to cool down. Charge the device if the battery is low. |
8. User Tips
- For optimal performance, regularly empty the dust cup and clean the HEPA filter.
- The compact size of the vacuum allows it to be stored conveniently in a car's cup holder.
- Utilize the different nozzles for specific tasks: the flat nozzle for tight spaces, the brush for delicate surfaces, and the blower for hard-to-reach dust.
9. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
