1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ORICO M.2 NVMe Magnetic SSD Enclosure (Models AP42F and AP42P). Please read this manual thoroughly before using the product to ensure proper functionality and safety.
The ORICO M.2 NVMe Magnetic SSD Enclosure is a high-performance external storage solution designed for M.2 NVMe 2230/2242 SSDs, offering 10Gbps data transfer speeds and up to 100W Power Delivery (PD). It features a magnetic design for easy attachment to compatible devices and the AP42F model includes dual TF/SD card slots for expanded functionality. It is compatible with a wide range of operating systems and devices, including Windows, Linux, Mac OS, Android, and iOS.
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.
Figure 2.1: Package Contents
| Item | Quantity |
|---|---|
| ORICO M.2 NVMe Magnetic SSD Enclosure | 1 |
| USB-C to USB-C Data Cable (10Gbps, 13cm) | 1 |
| Thermal Pad | 1 |
| Screws and Screwdriver | 1 set |
| User Manual | 1 |
| Universal Adapter Ring (for magnetic attachment) | 1 |
3. Specifications
Figure 3.1: Product Specifications
| Feature | ORICO-AP42F | ORICO-AP42P |
|---|---|---|
| Product Name | Magnetic M.2 SSD Enclosure | |
| Product Size | 70(L)×60(W)×13(H)mm | |
| Product Material | Aluminum + ABS | |
| Product Color | Black/Green/Blue (also Starry Ocean Blue, Mint Green, Starlight Black) | |
| Cable Specification | C To C 10G 13cm | |
| Input Interface | USB-C (10Gbps PD100W) | |
| Support Hard Disk | M.2 NVME 2230/2242*1, TF/SD 3.0*1 | M.2 NVME 2230/2242*1 |
| Power Input Interface | USB-C (PD100W) | |
| Support System | Windows, Linux, Mac OS, Android, iOS | |
| Max Capacity | Up to 2TB | |
| Transfer Speed | 10Gbps | |
| Magnetic System | 17 built-in magnets | |
| Protocols Supported | Thunderbolt 4 / USB3.2 / USB3.1 / USB3.0 | |
Note: Enclosure only (SSD not included). For mobile use, SSDs <4.5W are recommended. Higher-power SSDs may require PD port power. Excessive power may cause disconnections during recording.
4. Setup and Installation
Follow these steps to install your M.2 NVMe SSD into the enclosure.
Figure 4.1: Supported M.2 SSD Sizes and Key Types
- Open the Enclosure: Unscrew and gently remove the bottom cover of the enclosure.
Figure 4.2: Installation Steps Overview
- Install the Hard Drive: Carefully insert your M.2 NVMe SSD into the slot at a 30-degree angle. Gently push down and secure it with the provided rear screw. Ensure the SSD is properly seated.
- Apply Thermal Pad: Place the thermal pad (included) on top of the installed hard drive. This helps dissipate heat and maintain optimal performance.
- Complete Installation: Close the bottom cover and tighten the screws to secure the enclosure.
For a visual guide, please refer to the "Hard Drive Installation Guide" section in the official PDF user manual available at ORICO M.2 NVMe Enclosure User Manual (PDF).
5. Operating Instructions
5.1 Connecting to Devices
The enclosure supports a wide range of devices and operating systems.
Figure 5.1: System and Device Compatibility
- Connect the enclosure to your device (PC, laptop, smartphone, tablet, etc.) using the provided USB-C to USB-C cable.
- For devices with Lightning ports, a compatible Lightning adapter can be used (sold separately).
- The enclosure supports USB-C (10Gbps PD100W) for both data input and power input.
5.2 Data Transfer and Power Delivery
Experience blazing-fast data transfer and simultaneous charging.
Figure 5.2: High-Speed Data Transfer
- The enclosure supports 10Gbps read/write speeds, allowing for 1GB file transfers in approximately 1 second.
- With PD 100W support, you can transfer data and charge your connected device simultaneously, eliminating concerns about storage and battery life.
Figure 5.3: Continuous Power Delivery
5.3 TF/SD Card Reader Functionality (AP42F Model Only)
The AP42F model includes dual slots for TF and SD cards.
Figure 5.4: TF/SD Card Reading
- Insert your TF or SD card into the corresponding slot.
- The enclosure supports USB 3.0 high-speed data transfer for memory cards, with theoretical read speeds up to 90MB/s.
5.4 Magnetic Attachment
The enclosure features a multi-magnetic system for secure attachment.
Figure 5.5: Magnetic Convenience
- The 17 built-in magnets ensure a firm, wobble-free lock on contact with compatible surfaces or devices.
- Use the included universal adapter ring to enable magnetic attachment to devices that do not have built-in magnetic capabilities.
5.5 Indicator Light Description
The LED indicator provides status information:
Figure 5.6: Activity Status Indicator
- Solid Blue: The enclosure is powered on, and the hard drive is recognized.
- Flashing Blue: Data transfer is in progress. Do not disconnect the device during this time.
- No Light: The enclosure is powered off or the hard drive is not recognized.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or solvents.
- Storage: Store the enclosure in a cool, dry place away from direct sunlight and extreme temperatures.
- Smart Hibernation: The enclosure features a smart hibernation function that activates after 10 minutes of inactivity to extend the service life of the installed hard disk.
- Thermal Management: Ensure the thermal pad is correctly placed on the SSD during installation to aid in heat dissipation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Enclosure not recognized by device. |
|
|
| Slow data transfer speeds. |
|
|
| Disconnections during mobile recording (iPhone/Android). |
|
|
| TF/SD card not detected (AP42F only). |
|
|
8. User Tips
- SSD Compatibility: While the enclosure supports M.2 NVMe 2230/2242 SSDs, ensure your SSD is NVMe and not SATA, as they use different protocols.
- Thermal Pad: Always use the provided thermal pad during SSD installation. It's crucial for heat dissipation, especially during prolonged high-speed transfers, to prevent throttling and ensure drive longevity.
- Cable Quality: For optimal 10Gbps performance, always use the included high-quality USB-C to USB-C cable or another certified cable capable of 10Gbps data transfer. Not all USB-C cables are equal.
- Safe Ejection: Always safely eject the enclosure from your operating system before disconnecting it to prevent data corruption.
- Magnetic Ring Placement: When using the universal adapter ring for magnetic attachment, ensure it's placed on a clean, flat surface of your device for maximum adhesion.
9. Safety Precautions
- Do not expose the product to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the product to strong impacts.
- Do not attempt to disassemble or modify the product. This will void the warranty.
- Keep out of reach of children.
- Use only the provided or recommended accessories.
- Disconnect the device during thunderstorms or when unused for long periods.
10. Warranty and Support
ORICO products come with a standard warranty. Please refer to the official ORICO website or your purchase documentation for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact ORICO customer service or your local distributor. You can also refer to the comprehensive "Warranty Regulations" section in the official PDF user manual for more details: ORICO M.2 NVMe Enclosure User Manual (PDF).
11. Frequently Asked Questions (FAQ)
- Q: Is the SSD included with the enclosure?
- A: No, the M.2 NVMe SSD is not included and must be purchased separately.
- Q: What types of M.2 SSDs are supported?
- A: The enclosure supports M.2 NVMe SSDs in 2230 and 2242 form factors. It is not compatible with M.2 SATA SSDs.
- Q: Can I use this with my iPhone for recording 4K video?
- A: Yes, it supports ProRes 4K 60/120fps recording and direct saving to the SSD with compatible iPhone models (e.g., iPhone 15 Pro/Pro Max, iPhone 16 Pro/Pro Max). For higher power SSDs, external PD power might be required to prevent disconnections.
- Q: Does the AP42P model have a TF/SD card reader?
- A: No, only the AP42F model includes the TF/SD card reader functionality.
- Q: How do I know if the enclosure is working?
- A: The LED indicator will show a solid blue light when powered on and the SSD is recognized. It will flash blue during data transfer.
