Dooya DM45R-50/12, DM45S-50/12

Contents

Dooya DM45R-50/12 and DM45S-50/12 Tubular Motor User Manual

This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya Tubular Motor.

1. Introduction

The Dooya Tubular Motor is designed to automate traditional opening and closing curtains, rolling blinds, canopies, and electric sunshades. It operates on a 100-240V AC input. Models with a built-in ZigBee wireless communication module (DM45R-50/12) allow for remote control, timed settings, continuous speed adjustment, and manual stop functions. It can also be integrated with other intelligent devices for enhanced smart living scenarios.

The DM45R-50/12 model features a built-in RF433 module and uses a 3-core wire. The DM45S-50/12 is an external motor model with 4-core wiring and does not include an RF433 module, requiring an external receiver for remote control functionality.

Dooya Tubular Motor DM45R-50/12 and DM45S-50/12
Dooya Tubular Motor DM45R-50/12 and DM45S-50/12

2. Safety Information

  • This product is for indoor use only. Do not use in damp environments or outdoors.
  • Be cautious of moisture. Do not splash water or other liquids onto this product.
  • Do not place this product near heat sources.
  • If the power cord is damaged, it must be replaced by a professional from the manufacturer, its repair department, or a similar organization to avoid danger.
  • If the product malfunctions during use, do not attempt to repair it yourself. It should be done by an authorized professional.
  • Installation involving strong electricity should be performed by a professional curtain engineer in accordance with specifications. Ensure the main power supply is turned off during installation.

3. Product Overview

The Dooya tubular motors come in two main types: DM45R (Built-in RF433) and DM45S (Standard/External Motor).

3.1 Motor Distinction

The primary difference lies in the motor line and built-in features:

  • DM45R (Built-in Motor): Features a built-in receiver and uses a 3-core wire. It has a black antenna. This motor can be directly controlled by a wireless switch or wireless remote controller, suitable for installations without switch wiring or in small spaces.
  • DM45S (External Motor): Uses a 4-core wire and has no built-in antenna. It can be equipped with an external receiver and then used with a remote control.
DM45R vs DM45S Motor Distinction and Wiring Diagrams
DM45R (Built-in, 3-core wire) vs DM45S (External, 4-core wire) Motor Distinction and Wiring Diagrams. Figure 1 shows 4-core wiring (Blue=zero line, Brown=Fire Wire 1, Black=Firewire 2, Yellow/Green=ground wire). Figure 2 shows 3-core wiring (Blue=zero line, Brown=Fire Wire, Yellow/Green=ground wire).

3.2 Included Accessories

The package typically includes the tubular motor, a crown, and a drive adapter. Additional accessories like brackets, different tube sizes (50mm/55mm), and tail plugs may be required depending on your specific installation.

Accessories for DM45 Tubular Motor
Common accessories for DM45 Tubular Motors: Brackets, Drive Wheel, Crown, 50mm/55mm Tube, Tail Plug.

4. Specifications

Dooya DM45 Series Tubular Motor Specifications
ParameterValue
Product NameDooya DM45R-50/12 Electric Tubular motor
Model NumberDM45R-50/12, DM45S-50/12
Motor Size315 × 50 × 50mm
Wireless ConnectionZigBee (for DM45R)
Rated Input100-240V~, 50/60Hz
Rated Current0.22 A
Rated Input Power14.2 W (DM45R-50/12), 205W (DM45S-50/12)
Rated Torque2.0 N·m (DM45R-50/12), 50 N·m (DM45S-50/12)
Rated Speed65 r/min (DM45R-50/12), 12 r/min (DM45S-50/12)
Working SystemS2 4min
Protection LevelIP40
Insulation ClassClass A
CertificationCE
Battery IncludedNo
DM45S Motor Diagram and Specifications Table
DM45S Motor Diagram and Detailed Specifications Table for various DM45 models.

5. Installation

5.1 Installing the Motor into the Track Drive Box

  1. Gently pull down the fixed buckle on the motor.
  2. Rotate the motor into the locked position within the track drive box.
  3. Ensure you hear a "click" sound, indicating the motor is securely installed.

Important: Ensure the motor and track drive box are securely installed to prevent issues during use or motor detachment.

5.2 Wiring the Motor

Refer to the wiring diagrams below for correct power connection. All wiring should be performed by a qualified professional with the main power supply turned off.

  • 3-Core Wire (Built-in Motor, e.g., DM45R): Blue wire is the zero line, Brown wire is the live (Fire) wire, Yellow/Green wire is the ground wire.
  • 4-Core Wire (External Motor, e.g., DM45S): Blue wire is the zero line, Brown wire is Fire Wire 1, Black wire is Firewire 2, Yellow/Green wire is the ground wire.
Wiring Diagram for 3-core and 4-core tubular motors
Wiring diagrams for 4-core external motor (Figure 1) and 3-core built-in motor (Figure 2).

5.3 Motor Application Notes

AC tubular motors are divided into external and built-in motor types. For external motors, 220V AC power is fed into the switch, and then a 3-wire connection goes to the motor (2 FireWire, 1 zero line) for strong electrical control. This setup allows for mechanical manual switch operation (up, down, stop).

External Tubular Motor with Mechanical Hand Switch Wiring
External tubular motor 3-core wire power cord to the switch position with a mechanical hand switch.

External motors can also be equipped with a receiver and used with a remote control. After coding the remote with the receiver, you can control the motor via both the wall switch and remote control.

External Tubular Motor with Receiver Switch and Remote Control Wiring
External tubular motor 3-core wire power cord to the switch position with a receiver switch and DC305 remote control.

Built-in motors (like DM45R) have an integrated receiver, allowing direct use with a remote control or wireless switch. 220V AC power is supplied directly to the motor. This simplifies installation as all controllers are within the motor, eliminating the need for an external motor. It's ideal for situations without switch wiring or limited installation space.

Built-in Tubular Motor with Wireless Control Setup
Built-in tubular motor directly connected to power, controlled by wireless switch (DC863) or single-channel remote (DC305).
Video demonstrating the installation of the motor into the track, remote control pairing, and setting upper and lower limits for the roller blind.

6. Operation

6.1 Remote Control Types

The rolling code version of the remote control is available in various channels:

  • DC2700AM: 1 channel remote control.
  • DC2760AM: 2 channel remote control.
  • DC2702D: 15 channel remote control.
Dooya Remote Control Models
Various Dooya remote control models: DC2700AM (1 channel), DC2760AM (2 channel), DC2702D (15 channel).

6.2 Quick Operation Instructions (Button Functions)

Motor Button Functions
ActionDescription
Single ClickPerforms open, close, or stop operation based on current curtain status.
Double ClickQueries the connection status between the motor and gateway.
Triple ClickSets a custom travel point (sets current position as a start/end point. Once two points are set, the motor will operate between them).
5 Quick ClicksDeletes the currently set motor travel.
Long Press (5+ seconds)Restores the motor to factory settings and enters network pairing mode.

6.3 Buzzer and Indicator Light Status

Buzzer and Indicator Light Meanings
SourceStatusDescription
BuzzerShort 2 beepsNo travel set: Delete travel action performed. With travel set: Custom travel action performed.
Short 3 beepsMotor powered on.
Long 1 beepDelete motor travel, restore factory settings, motor direction change successful, manual travel point setting successful.
Blue light slow flash 2 timesPerform device search.
Blue light fast flashEnter initialization state (first use or after factory reset).
Indicator LightYellow light slow flashOTA upgrade in progress.
Blue light solidMotor is connected to the network and operating.
Red light solidMotor is not connected to the network and operating.

7. Maintenance

To ensure the longevity and optimal performance of your Dooya tubular motor, follow these maintenance guidelines:

  • Regularly inspect the motor and curtain system for any signs of wear, damage, or loose connections.
  • Keep the motor and surrounding area clean and free from dust and debris.
  • Avoid exposing the motor to excessive moisture or extreme temperatures.
  • Do not attempt to lubricate the motor or internal components unless specifically instructed by the manufacturer.
  • If any unusual noises or operational issues occur, refer to the troubleshooting section or contact customer support.

8. Troubleshooting

If you encounter issues with your motor, refer to the buzzer and indicator light status table in Section 6.3 for initial diagnosis. Common issues and their potential solutions include:

  • Motor not responding to remote control: Check if the motor is powered on (buzzer short 3 beeps on power-up). Ensure the remote control is paired correctly (refer to Section 6.2 for pairing instructions). Check the indicator light status (blue solid for connected, red solid for not connected).
  • Motor not moving to desired limits: The travel limits may need to be set or reset. Use the triple-click function to set custom travel points or the 5 quick clicks to delete existing travel settings, then re-set.
  • Motor making unusual noises: Inspect the curtain track for obstructions. Ensure the motor is securely installed in the track drive box. If the noise persists, contact customer support.
  • Motor not connected to network (for DM45R with ZigBee): If the indicator light is solid red, the motor is not connected. Long press the reset button for 5+ seconds to restore factory settings and enter network pairing mode, then attempt to re-pair with your gateway.

9. User Tips

  • Remote Control Pairing and Limit Setting: The process for pairing the remote control and setting the upper and lower limits is crucial for proper operation. If you find the provided instructions unclear, searching for video tutorials specific to Dooya tubular motors (DM45R or DM45S) can be very helpful. Many users have successfully figured this out through online resources.
  • Motor Type Selection: When purchasing, ensure you select the correct motor type (DM45R for built-in RF433 and 3-core wiring, or DM45S for external control and 4-core wiring) based on your existing setup and desired control method.
  • Professional Installation: Due to the involvement of strong electrical currents, it is highly recommended to have the motor installed by a professional to ensure safety and correct functionality.

10. Warranty and Support

10.1 Warranty Policy (China)

This product strictly adheres to the 'Consumer Rights Protection Law of the People's Republic of China' and the 'Product Quality Law of the People's Republic of China' for after-sales service, which includes return, exchange, and repair services. A valid invoice is required for these services.

  • 7-Day No-Reason Return (e-commerce channels): Within 7 days from the date of receipt, returns are accepted without reason, but the user is responsible for logistics costs.
  • Quality Issue Return/Exchange/Repair: If the product exhibits performance failures listed in the 'Product Performance Failure Table' and is confirmed by the after-sales service center, free return, exchange, or repair services are provided:
Service TypeService Policy
ReturnReturn due to product quality issues within 7 days from receipt.
ExchangeExchange due to product quality issues within 15 days from receipt.
RepairRepair due to product quality issues within 3 years from receipt.

It is recommended to keep the original packaging for at least 30 days from the date of receipt to ensure safe transportation if needed.

10.2 Manufacturer Information

Name: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
Tel: 86-18589043609

10.3 EU Authorized Representative

Name: Sophie Bennett
Address: 9 rue du Bat d'Argent, 69001 Lyon, France
Tel: 33-774555006

For further support or inquiries, please contact the manufacturer or your local distributor.

11. Environmental Protection

This product complies with EU RoHS directives. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.

12. Important Warnings

Please be aware of potential fire risks and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of any lithium-ion battery safely in accordance with applicable legal requirements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.