Introduction
Thank you for purchasing the OGORI 4-in-1 Car Jump Starter. This versatile device combines a powerful car jump starter, a cordless air compressor, a portable power bank, and an emergency LED flashlight into one compact unit. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance in various emergency situations.
Package Contents
Please check the package contents upon unboxing:
- Main Unit (4-in-1 Jump Starter)
- Smart Jumper Clamps
- Air Hose
- Inflation Nozzles (various types)
- USB Charging Cable
- Storage Bag
- User Manual (this document)
Setup
Initial Charging
Before first use, fully charge the jump starter. Connect the provided USB charging cable to the device's input port and a suitable USB power adapter (not included). The smart screen will indicate the charging status and battery level. A full charge ensures optimal performance and readiness for emergencies.
Understanding the Smart Screen
The large smart screen displays crucial information such as battery percentage, air pressure units (PSI, BAR, KPA, Kg/cm²), and temperature protection status. Familiarize yourself with these indicators for safe and effective operation.
Operating Instructions
1. Car Jump Starter Function
This device can jump start 12V vehicles with up to 12.0L petrol or 10.0L diesel engines, even in extreme temperatures (-20℃ to 60℃). It provides a peak current of 7500A.
- Insert the Starting Cable: Firmly insert the blue end of the smart jumper cable into the jump starter's output port.
- Connect Clamps to Battery: Connect the red clamp to the positive (+) terminal of your car battery and the black clamp to the negative (-) terminal. Ensure a secure connection.
- Turn on Your Engine: Once connected, turn on your car's ignition. The vehicle should start.
- Remove Clamps: Immediately after the car starts, remove the clamps from the car battery, then disconnect the starting cable from the jump starter.
Note: Remove the clamps immediately after starting the car to prevent damage.
2. Cordless Air Compressor Function
The built-in air compressor provides a maximum pressure of 150 PSI and an airflow of 35L/Min. It can inflate a car tire from 0-36 PSI in approximately 3 minutes, or refill a tire from 25-36 PSI in about 1 minute. It is suitable for cars, bicycles, motorcycles, basketballs, and pool toys.
- Connect Air Hose: Screw the air hose securely onto the device's air output port.
- Attach to Tire/Item: Attach the other end of the air hose to the valve stem of the tire or item you wish to inflate. Use the appropriate inflation nozzle if needed.
- Set Desired Pressure: Use the control buttons on the device to set your desired pressure (PSI, BAR, KPA, or Kg/cm²).
- Start Inflation: Press the power button to begin inflation. The device will automatically stop once the preset pressure is reached.
- Disconnect: Remove the air hose from the tire/item and the device.
3. Power Bank Function
The device features smart USB output ports (USB1: 5V/3A, 9V/2A, 12V/1.5A; USB2: 5V/3A) to quickly and safely charge your mobile phones, tablets, and other USB-powered devices.
- Connect Device: Plug your device's charging cable into one of the USB output ports on the jump starter.
- Charging: The jump starter will automatically begin charging your device. The smart screen may indicate charging status.
- Disconnect: Remove your device once fully charged or when you no longer need to charge.
4. LED Flashlight Function
The integrated 400 Lumen LED flashlight offers three modes for various situations: stabilized lighting, SOS emergency signal, and strobe light.
- Turn On/Off: Press and hold the flashlight button to turn the light on or off.
- Change Modes: Short press the flashlight button to cycle through the modes: Stabilized Light > SOS > Strobe.
Maintenance
Charging and Storage
- For optimal battery life and readiness, it is recommended to fully charge the device every 3-6 months, even if not in use. It boasts an extreme low self-discharge rate, allowing up to 12 months standby on a full charge.
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
Cleaning
- Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure all ports are free from dust and debris.
Durability
The device features an indestructible and safe case, making it water-resistant, drop-proof, and dust-proof for enhanced longevity and reliability in various environments.
Troubleshooting
Common Issues & Solutions
- Device not turning on: Ensure the device is fully charged.
- Car not starting: Check that the jumper clamps are securely connected to the correct battery terminals. Ensure the car battery is 12V.
- Air compressor not inflating: Verify the air hose is properly connected to both the device and the tire valve. Check if the desired pressure is set correctly.
- Device not charging external devices: Ensure the USB cable is properly connected and the external device is compatible with the output specifications.
Safety Protections
The device is equipped with comprehensive safety features to protect both the user and the equipment:
- High Voltage Protection
- Low Voltage Protection
- High Charging Temperature Protection
- Low Charging Temperature Protection
- High Discharging Temperature Protection
- Low Discharging Temperature Protection
- Short Circuit Protection
- Reverse Connection Protection
- Backcharge Protection
Specifications
| Feature | Specification |
|---|---|
| Peak Current | 7500A |
| Battery Voltage | 12V |
| Engine Compatibility | Up to 12.0L Petrol, 10.0L Diesel |
| Air Compressor Max Pressure | 150 PSI |
| Air Compressor Airflow | 35L/Min |
| Power Bank Output | USB1: 5V/3A, 9V/2A, 12V/1.5A (QC 3.0) USB2: 5V/3A |
| Flashlight Brightness | 400 Lumens |
| Operating Temperature | -20℃ to 60℃ |
| Standby Time | Up to 12 months (on full charge) |
| Dimensions (L x W x H) | 21.00 cm x 11.00 cm x 6.50 cm (8.26 in x 4.33 in x 2.55 in) |
| Weight | 1.4 kg |
| Durability | Water-Resistant, Drop-Proof, Dust-Proof |
User Tips
- Pre-charge for emergencies: Always ensure your jump starter is fully charged before long trips or storing it in your vehicle, especially in cold weather.
- Check tire pressure regularly: Use the air compressor function to maintain optimal tire pressure, which can improve fuel efficiency and tire longevity.
- Keep it accessible: Store the device in its carrying bag in an easily accessible location in your vehicle for quick retrieval during emergencies.
- Read the display: Pay attention to the smart screen for battery level and pressure readings to ensure safe and effective operation.
Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
