AULA NOVA 75

Contents

AULA NOVA 75 Mechanical Keyboard User Manual

Model: NOVA 75

Introduction

Thank you for choosing the AULA NOVA 75 Mechanical Keyboard. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new keyboard. Designed for both desktop and gaming applications, the NOVA 75 features a compact 61-key layout, 3-mode connectivity (2.4Ghz Wireless, Bluetooth, and Wired), hot-swappable switches, and vibrant multicolor backlighting. Please read this manual carefully to ensure optimal performance and longevity of your device.

AULA NOVA 75 mechanical keyboard, front view with blue backlighting
Figure 1: AULA NOVA 75 Mechanical Keyboard (Front View)

Setup

1. Unpacking

Carefully remove all components from the packaging. Ensure the following items are present:

  • AULA NOVA 75 Mechanical Keyboard
  • USB-C Cable (for wired connection and charging)
  • 2.4Ghz Wireless Receiver
  • Keycap Puller (for maintenance)
  • Switch Puller (for maintenance)
  • User Manual (this document)

2. Charging the Battery

The keyboard comes with a built-in battery. Before first use, or if the battery is low, connect the keyboard to a USB power source (e.g., computer USB port, USB wall adapter) using the provided USB-C cable. The charging indicator will show the charging status. A full charge is recommended for optimal wireless performance.

3. Connecting the Keyboard

The AULA NOVA 75 supports three connection modes: 2.4Ghz Wireless, Bluetooth, and Wired (USB-C).

3.1. 2.4Ghz Wireless Connection

  1. Locate the 2.4Ghz wireless receiver.
  2. Plug the receiver into an available USB port on your computer.
  3. Turn on the keyboard and switch it to 2.4Ghz wireless mode (refer to the keyboard's physical switch or function key combination for mode selection).
  4. The keyboard should automatically connect to your computer.

3.2. Bluetooth Connection

  1. Turn on the keyboard and switch it to Bluetooth mode (refer to the keyboard's physical switch or function key combination for mode selection).
  2. On your computer or device, enable Bluetooth and search for new devices.
  3. Select "AULA NOVA 75" (or similar name) from the list of available devices.
  4. Follow any on-screen prompts to complete the pairing process.

3.3. Wired (USB-C) Connection

  1. Connect one end of the USB-C cable to the keyboard's USB-C port.
  2. Connect the other end of the USB-C cable to an available USB port on your computer.
  3. The keyboard will automatically switch to wired mode and be ready for use. It will also charge the battery in this mode.

Operating Instructions

1. Basic Typing

The AULA NOVA 75 functions as a standard QWERTY keyboard. Simply connect it using your preferred method and begin typing.

2. Backlight Control

The keyboard features multicolor backlighting. Use the designated function key combinations (e.g., Fn + specific key) to cycle through different lighting effects, adjust brightness, or change colors. Refer to the keyboard's specific key legends or a quick guide for exact combinations.

3. Mode Switching

To switch between 2.4Ghz Wireless, Bluetooth, and Wired modes, use the physical switch located on the keyboard or specific function key combinations. Ensure the correct mode is selected for your desired connection type.

4. Hot-Swappable Switches

The NOVA 75 supports hot-swappable switches, allowing you to change mechanical switches without soldering. This feature enables customization of typing feel and sound.

AULA NOVA 75 mechanical keyboard, disassembled view showing internal components and backlighting
Figure 2: Internal view of the AULA NOVA 75, highlighting hot-swappable switch sockets.

Maintenance

1. Cleaning the Keyboard

  • Keycaps: Use the provided keycap puller to carefully remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
  • Keyboard Body: Wipe the keyboard body with a soft, slightly damp cloth. Avoid excessive moisture.
  • Between Keys: Use compressed air to remove dust and debris from between the switches.

2. Replacing Switches

Thanks to the hot-swap feature, you can easily replace switches:

  1. Using the switch puller, gently grip the switch from the top and bottom (not the sides) and pull upwards to remove it.
  2. Align the pins of the new switch with the holes on the PCB.
  3. Gently push the new switch into place until it clicks. Ensure it is seated firmly and evenly.

Caution: Apply gentle, even pressure when inserting switches to avoid bending the pins. If a switch doesn't go in easily, check pin alignment.

3. Battery Care

  • Avoid fully discharging the battery frequently.
  • Store the keyboard in a cool, dry place when not in use for extended periods.
  • Use only the provided USB-C cable or a certified equivalent for charging.

Troubleshooting

1. Keyboard Not Responding

  • Check Connection: Ensure the keyboard is properly connected via USB-C, the 2.4Ghz receiver is plugged in, or Bluetooth is paired.
  • Mode Switch: Verify that the keyboard is set to the correct connection mode (Wired, 2.4Ghz, or Bluetooth).
  • Battery: If in wireless mode, check the battery level and charge if necessary.
  • Restart: Try restarting your computer and the keyboard.

2. Keys Not Working or Double-Typing

  • Clean Key: Remove the keycap and switch, then clean any debris around the switch socket.
  • Reseat Switch: Carefully remove and re-insert the switch for the affected key.
  • Replace Switch: If the issue persists, the switch may be faulty. Replace it with a new one (compatible with hot-swap sockets).

3. Backlight Issues

  • Brightness: Ensure the backlight brightness is not set to minimum. Adjust using function key combinations.
  • Software: If applicable, check any companion software for backlight settings.

4. Wireless Connectivity Drops

  • Interference: Move the keyboard closer to the receiver/device, or away from other wireless devices (routers, cordless phones).
  • Battery: Low battery can affect wireless signal strength. Charge the keyboard.
  • Drivers: Ensure your computer's Bluetooth or USB drivers are up to date.

Specifications

FeatureDetail
Brand NameAULA (ziyoulang)
ModelNOVA 75
Keyboard Standard61 Keys (Compact Layout)
Operation StyleMechanical
Type2.4Ghz Wireless (Tri-mode connectivity: 2.4Ghz, Bluetooth, Wired)
Switches Hot SwapYes
Keycup MaterialPBT plastic
Backlight TypeMulticolor
Wrist SupportNo
Battery IncludedYes
ApplicationDesktop
LanguageEnglish
OriginMainland China

User Tips

  • Customization: Experiment with different mechanical switches to find your preferred typing feel, thanks to the hot-swap feature.
  • Firmware Updates: Check the manufacturer's website periodically for any firmware updates that might improve performance or add new features.
  • Keycap Compatibility: When replacing keycaps, ensure they are compatible with standard MX-style switches.
  • Wireless Range: For the most stable wireless connection, keep the keyboard within a reasonable range of your device and minimize obstructions.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official AULA website or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2024 AULA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.