1. Introduction
Thank you for purchasing the Sheik Mainland 3MIN-A PROJECT 1/18 scale 3.75-inch Action Figure Assembly Model Kit. This kit allows you to build and customize your own highly articulated sci-fi soldier figure. This manual provides detailed instructions for assembly, operation, maintenance, and safety to ensure an enjoyable experience with your new hobby toy.
2. Product Overview
The 3MIN-A PROJECT action figure is a highly detailed and articulated model designed for collectors and hobbyists. It features a robust joint system for dynamic posing and comes with various accessories for customization.
Key Features:
- Scale: 1/18 (approximately 3.75 inches / 9.7 cm tall)
- Material: Durable POK and ABS plastic
- Articulation: Over 20 movable joints for extensive posing options
- Interchangeability: Universal joint configuration compatible with other 3MIN series parts, allowing for weapon and limb swaps.
- Accessories: Includes an exclusive display stand, multiple sets of interchangeable hands, and various weapon accessories.
3. Package Contents
Each box of the 3MIN-A PROJECT model kit contains the following components:
- Unassembled 3MIN-A PROJECT Action Figure Body (2 sets)
- 3MIN Exclusive Display Stand (2 sets)
- Interchangeable Hands (6 pairs per figure)
- Universal Weapon Accessories (e.g., rifle, sword, shield parts)
4. Assembly Instructions
The 3MIN-A PROJECT is an assembly model kit. Carefully follow these steps to build your figure. It is recommended to use appropriate modeling tools (not included) for best results.
4.1 Understanding Articulation Points
The figure features over 20 movable joints, utilizing POK joint parts for smooth and stable movement. Key articulation points include:
- Shoulder and Hip Joints: Designed to pull out for an extended range of motion.
- Neck Joint: Allows for rotation and tilting of the head.
- Knee and Ankle Joints: Provide a wide range of movement for dynamic leg poses.
4.2 Assembling the Figure Body
- Carefully detach all parts from their runners. Use a hobby knife or nippers for clean cuts to avoid damaging the plastic.
- Assemble the torso, arms, and legs by connecting the joint parts. Refer to the product images for the correct orientation of each limb.
- Ensure all joints are securely fitted but allow for smooth movement. Do not force parts together.
- Attach the head to the neck joint.
4.3 Assembling the Display Stand
The exclusive display stand provides stability and allows for dynamic aerial poses.
- Connect the stand arm to the base.
- Attach the figure's back or waist to the stand's clip for support.
The stand base also features 3mm and 4mm holes, and corresponding holes on its underside, allowing for direct connection of 3MIN series interchangeable hands for convenient storage and display.
5. Operating Instructions
5.1 Posing Your Figure
Utilize the figure's extensive articulation to create various dynamic poses. Gently manipulate the joints to achieve desired stances. The shoulder and hip joints can be pulled out slightly to increase their range of motion for more extreme poses.
5.2 Attaching Accessories
The figure comes with various interchangeable hands and weapon accessories. To attach:
- Gently pull off the existing hand from the wrist joint.
- Select the desired interchangeable hand and carefully push it onto the wrist joint until secure.
- Weapons can be placed into the gripping hands or attached to designated ports on the figure or stand (if applicable).
The joint configuration is universal with other 3MIN series products, allowing for interchangeability of weapons and even limbs for advanced customization.
6. Maintenance
To ensure the longevity and appearance of your 3MIN-A PROJECT action figure, follow these maintenance guidelines:
- Cleaning: Dust the figure regularly with a soft, dry brush or cloth. For stubborn dirt, lightly dampen a cloth with water and gently wipe. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation and discoloration.
- Joint Care: If joints become loose over time, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the ball joint and allowed to dry to increase friction. If joints are too stiff, gently warm the area with a hairdryer on a low setting before attempting to move.
- Handling: Always handle the figure by its main body parts. Avoid excessive force on small or delicate components.
7. Troubleshooting
Common Issues and Solutions:
| Problem | Solution |
|---|---|
| Joints are too stiff. | Gently warm the joint area with a hairdryer on a low setting for a few seconds to soften the plastic before attempting to move. |
| Joints are too loose. | Apply a thin layer of clear nail polish or specialized joint-tightening fluid to the ball joint. Allow it to dry completely before reassembling. |
| Parts do not fit together. | Ensure all excess plastic (nubs) from the runners have been removed. Check the orientation of the parts. Do not force; if necessary, gently sand down connection points. |
| Figure falls off the stand. | Ensure the figure is securely clipped to the stand. Adjust the stand's arm and base for better balance, especially with dynamic poses. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Sheik Mainland |
| Model | 3MIN-A PROJECT |
| Scale | 1:18 |
| Figure Height | Approx. 3.75 inches (9.7 cm) |
| Material | POK, ABS Plastic |
| Articulation Points | Over 20 movable joints |
| Joint Sizes | 3mm pegs, 4mm, 5mm, 6mm ball joints |
| Package Contents | 2 figures per box, stands, interchangeable hands, weapon accessories |
| Recommended Age | 14+ years, 18+ years |
| Origin | Mainland China |
| Package Weight | 0.25 kg |
9. User Tips
- Pre-assembly Check: Before starting assembly, lay out all parts and compare them against the parts list (if available) to ensure nothing is missing or damaged.
- Dry Fit: Always dry fit parts before applying glue (if using) or permanently snapping them together. This helps identify potential fit issues.
- Customization: The universal joint system allows for creative customization. Experiment with different weapons and even parts from other 3MIN series figures to create unique designs.
- Painting: For advanced hobbyists, the plastic material is suitable for painting. Always prime the parts first and use paints designed for plastic models.
10. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
- Recommended for ages 14 and up. Adult supervision is advised for younger users.
- Keep packaging materials away from children.
- Avoid placing the figure in your mouth.
11. Warranty & Support
For any questions, concerns, or support regarding your Sheik Mainland 3MIN-A PROJECT action figure, please contact the seller or manufacturer directly. Please retain your proof of purchase for any warranty claims.
