yinzam W8, PW8, C6

Contents

Yinzam Projector Mount Instruction Manual

Models: W8, PW8, C6

For Vidda C1/C2/C3/C5 Series, M2Pro, and XGIMI RS20/RS30 Series Projectors

1. Introduction

This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your Yinzam Projector Mount. Please read this manual thoroughly before installation and keep it for future reference. These mounts are designed to securely hold your projector, offering flexibility in placement and optimal viewing angles.

2. Safety Information

  • Ensure the mounting surface (wall or ceiling) is strong enough to support the weight of the mount and the projector.
  • Use appropriate tools and hardware for installation. If unsure, consult a professional.
  • Do not exceed the maximum load capacity of 10kg.
  • Keep children and pets away from the installation area.
  • Always ensure all screws and connections are securely tightened before mounting the projector.
  • Avoid installing the mount in areas prone to vibration or excessive heat.

3. Package Contents

Please verify that all components are present before beginning installation. Contents may vary slightly by model (W8, PW8, C6).

W8 Model Packing List: Gimbal, Decorative Cover Plate, M6x60mm Expansion Screws
W8 Model Packing List: Gimbal, Decorative Cover Plate, M6x60mm Expansion Screws
PW8 Model Packing List: Mount, Decorative Cover Plate, Screws
PW8 Model Packing List: Mount, Decorative Cover Plate, Screws
C6 Model Packing List: Mount, Screws
C6 Model Packing List: Mount, Screws

4. Specifications

Feature Specification
Brand Name yinzam
Model Numbers W8, PW8, C6
Compatibility Vidda C1/C2/C3/C5 Series, M2Pro; XGIMI RS20/RS30 Series
Load Capacity 10kg (Solid materials, corrosion-resistant and rust-proof aluminum alloy)
Mounting Screw 1/4 inch Standard Universal Screw (Approx. 6.35mm diameter)
W8 Packing Size 35x25x15cm
W8 Packing Weight 1.5kg
PW8 Packing Size 33x18x13cm
PW8 Packing Weight 2.6kg
C6 Packing Size 40x22x10cm
C6 Packing Weight 1.1kg
Close-up of the 1/4 inch universal screw, approximately 6.35mm in diameter.
Standard 1/4 inch Universal Screw Diameter (Approx. 6.35mm)
W8 Model dimensions showing length 285mm (11.22
PW8 Model Dimensions
C6 Model dimensions showing three height levels: 190mm, 390mm, and 490mm.
C6 Model Adjustable Height Levels (190mm, 390mm, 490mm)

5. Setup and Installation

The installation process is similar for W8 and PW8 wall mounts, and C6 ceiling mounts, with specific considerations for each type.

5.1 General Installation Steps (W8/PW8 Wall Mounts)

  1. Prepare the Mounting Location: Take out the base plate of the mount. Identify a suitable, fixed position on a load-bearing wall for installation.
  2. Mark and Drill Holes: Mark the positions of the four mounting holes on the wall using the base plate as a template. Drill holes with an M8 drill bit and then insert the provided expansion plugs.
  3. Secure the Base Plate: If applicable, pass the projector's power cable through the cable conduit opening on the mount's base plate. Then, securely fix the base plate to the wall using the provided screws.
  4. Attach Decorative Cover (W8/PW8): Place the decorative cover over the base plate, secure it with the fixing ring, and screw the projector mounting screw (1/4 inch) onto the base clockwise.
  5. Mount the Projector: Screw the projector onto the 1/4 inch mounting screw on the mount. Ensure the projector is firmly attached. The mount is designed for projectors weighing up to 5KG.
  6. Adjust and Tighten: After installing the projector, slightly loosen the pan and tilt adjustment screws. Power on the projector and adjust its angle to achieve the desired projected image. Once satisfied, tighten all pan and tilt adjustment screws securely.
W8 Projector Wall Mount installed with a projector, showing front view.
W8 Projector Wall Mount with Projector
W8 Model showing cable outlet design for neat wire management.
W8 Model Cable Outlet Design
W8 Model showing options for front or back installation of the projector.
W8 Model Front/Back Installation

5.2 C6 Ceiling Mount Installation Steps

  1. Prepare the Mounting Location: Identify a suitable, fixed position on a sturdy ceiling for installation.
  2. Mark and Drill Holes: Mark the positions for the mounting screws on the ceiling. Drill holes and insert appropriate anchors (not explicitly listed in packing, but implied by installation type).
  3. Secure the Mount: Attach the ceiling mount base to the ceiling using the provided screws.
  4. Adjust Height (C6): The C6 model offers three height levels (190mm, 390mm, 490mm). Select the desired height and adjust the pole accordingly.
  5. Cable Management (C6): The C6 model features a double U-shaped conduit trough for neat cable routing, accommodating both thick and thin wires. Pass power and HDMI cables through this trough.
  6. Mount the Projector: Screw the projector onto the 1/4 inch mounting screw at the end of the pole. Ensure the projector is firmly attached.
  7. Adjust and Tighten: Loosen the adjustment knob on the pole to adjust the projector's angle. Power on the projector and adjust its angle to achieve the desired projected image. Once satisfied, tighten the adjustment knob securely.
C6 Projector Ceiling Mount installed with a projector, showing it hanging from the ceiling.
C6 Projector Ceiling Mount with Projector
C6 Model showing wiring inside the conduit trough and three height levels available for selection.
C6 Model Wiring Conduit and Height Adjustment
C6 Model installation diagram showing steps for mounting to ceiling, routing cables, and attaching projector.
C6 Model Installation Diagram

5.3 Unboxing and Installation Video (W8 Model Example)

Video demonstrating the unboxing and installation process for the W8 Projector Wall Mount.

6. Operation

Once the projector is securely mounted, you can adjust its position and angle:

  • Pan/Tilt Adjustment: Loosen the pan and tilt screws (for W8/PW8) or the adjustment knob (for C6) to freely move the projector.
  • Angle Setting: Adjust the projector to achieve the desired projection angle and image alignment.
  • Secure Position: Once the desired angle is set, firmly tighten all adjustment screws/knobs to lock the projector in place.

7. Maintenance

  • Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
  • Periodic Check: Regularly inspect all mounting screws and connections to ensure they remain tight and secure.
  • Load Capacity: Do not place additional weight on the mount beyond the projector's weight.

8. Troubleshooting

  • Mount feels unstable: Re-check all mounting screws and wall anchors. Ensure the wall is load-bearing and suitable for installation. Verify the projector weight does not exceed 10kg.
  • Projector overheating: Ensure there is adequate space around the projector for ventilation. A minimum of 20 cm (approx. 8 inches) between the projector and the wall is recommended for proper fan cooling.
  • Cables are messy: Utilize the integrated cable management features (conduit trough for C6, cable outlet for W8/PW8) to route and conceal cables neatly.

9. User Tips

  • Ventilation Space: For optimal projector performance and longevity, especially for models like the Hisense C2, ensure a minimum distance of 20 cm (approximately 8 inches) between the projector's fan vents and any adjacent surfaces (e.g., wall). This allows for proper airflow and prevents overheating.
  • Model Confirmation: If you ordered a specific model (e.g., ASW8) and it is out of stock, the seller might offer an upgraded, compatible model (e.g., PW8) as a substitute. It is advisable to confirm the exact model and its specifications, including material differences (e.g., brushed aluminum vs. stainless steel), if you have a strong preference.
  • Cable Management: Take advantage of the mount's design for cable routing to maintain a clean and organized setup.

10. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

You can also refer to the official product page for additional resources or contact information.

A PDF version of the user manual is available for download: User Manual (PDF)

© 2024 Yinzam. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.