AULA MINI60 HE PRO

Contents

AULA MINI60 HE PRO 60% ANSI US Layout Gaming Keyboard User Manual

Model: MINI60 HE PRO

Introduction

The AULA MINI60 HE PRO is a high-performance 60% ANSI US layout gaming keyboard featuring Hall Effect magnetic switches, tri-mode connectivity (Wired, 2.4GHz Wireless, Bluetooth), and advanced programmable functions. Designed for both competitive gaming and efficient productivity, it offers unparalleled responsiveness, customizable actuation points, and vibrant RGB backlighting. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.

AULA MINI60 HE PRO Black Keyboard, top view

AULA MINI60 HE PRO Black Keyboard

Package Contents

Upon unboxing, please verify that all the following items are included:

  • AULA MINI60 HE PRO Keyboard (Black or White variant)
  • USB-C to USB-A Cable
  • 2.4GHz Wireless Dongle
  • Keycap Puller
  • Switch Puller
  • Extra Magnetic Switches (typically 2-4)
  • Quick Operation Guide / Product Manual
AULA MINI60 HE PRO Black Keyboard unboxing contents

Contents of the AULA MINI60 HE PRO Keyboard package (Black variant shown)

Setup Instructions

1. Charging the Keyboard

The keyboard is equipped with a 4000mAh rechargeable battery. Before initial use or when the battery is low, connect the USB-C cable to the keyboard's port and the other end to a powered USB-A port on your computer or a wall adapter. The keyboard's indicator light will show charging status.

2. Connecting the Keyboard

The AULA MINI60 HE PRO supports three connection modes:

  • Wired Mode (USB-C):

    Connect the provided USB-C cable from the keyboard to your computer's USB port. The keyboard will automatically switch to wired mode. To manually select wired mode, press Fn + T.

  • 2.4GHz Wireless Mode:

    Plug the 2.4GHz wireless dongle into an available USB port on your computer. The keyboard should automatically connect. To manually select 2.4GHz mode, press Fn + R.

  • Bluetooth Mode:
    1. Press Fn + Q, W, or E to select one of the three Bluetooth channels. The corresponding key will flash, indicating pairing mode.
    2. On your device (PC, Mac, or Android), open Bluetooth settings and search for "AULA MINI60 HE PRO".
    3. Select the keyboard to pair. Once connected, the key will stop flashing and remain lit.
    4. You can pair up to three Bluetooth devices and switch between them by pressing Fn + Q/W/E.
Quick Operation Guide for AULA MINI60 HE PRO

Quick Operation Guide showing key combinations for connectivity and functions.

Operating Instructions

1. Basic Key Functions (60% Layout)

The MINI60 HE PRO features a compact 60% layout. Many keys have secondary functions accessed by holding the Fn key. Refer to the quick operation guide image for a visual representation.

Key CombinationFunction
Fn + Q/W/EBluetooth Channel 1/2/3 (Pairing/Switching)
Fn + R2.4GHz Wireless Mode
Fn + TWired Mode
Fn + BackspaceDelete
Fn + PPrint Screen
Fn + [Home
Fn + ]End
Fn + ;Page Up
Fn + 'Page Down
Fn + Left AltLeft Arrow
Fn + Left CtrlUp Arrow
Fn + Left ShiftDown Arrow
Fn + Right CtrlRight Arrow
Fn + WinLock/Unlock Windows Key
Fn + SpaceChange RGB Lighting Mode
Fn + Up ArrowIncrease RGB Brightness
Fn + Down ArrowDecrease RGB Brightness
Fn + Left ArrowAdjust RGB Effect Speed/Direction
Fn + Right ArrowAdjust RGB Effect Speed/Direction
Fn + MMute Audio
Fn + ,Volume Down
Fn + .Volume Up
Fn + 1-12 (top row)F1-F12 Function Keys

2. RGB Backlighting

The keyboard features stunning RGB backlighting with south-facing LEDs and shine-through keycaps.

  • Press Fn + Space to cycle through various lighting modes.
  • Use Fn + Up Arrow / Down Arrow to adjust brightness levels.
  • Use Fn + Left Arrow / Right Arrow to change the speed or direction of dynamic lighting effects.
AULA MINI60 HE PRO Black Keyboard with RGB backlighting

AULA MINI60 HE PRO Black Keyboard with active RGB backlighting.

3. Programmable Web Driver (Advanced Features)

The MINI60 HE PRO utilizes a programmable web driver for advanced customization. This driver allows you to:

  • Adjust Actuation Points: Fine-tune the trigger point of each Hall Effect magnetic switch from 0.1mm (for rapid response in FPS games) to 3.4mm (for deliberate typing).
  • Mod Tap: Assign multiple functions to a single key based on whether it's tapped or held.
  • Dynamic Keystroke (DKS): Implement advanced keybinds where functions change based on varying keystroke distances, allowing for precise control in games.
  • Create Macros: Program complex sequences of commands to a single key.

Access the official AULA website for the web driver software and detailed instructions on its use.

Maintenance

1. Cleaning the Keyboard

  • Disconnect the keyboard from all power sources before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and case.
  • For dust and debris between keys, use compressed air or a small brush.
  • Avoid using harsh chemicals or abrasive materials, as these can damage the keyboard's finish.

2. Hot-Swapping Switches

The AULA MINI60 HE PRO features hot-swappable switches, allowing you to easily change switches without soldering.

  1. Using the provided keycap puller, gently remove the keycap from the switch you wish to replace.
  2. Using the provided switch puller, carefully grip the top and bottom clips of the switch and pull it straight up to remove it from the PCB.
  3. Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
  4. Gently push the new switch into place until it clicks securely. Replace the keycap.

Always ensure the keyboard is disconnected or powered off before hot-swapping switches to prevent accidental damage.

Troubleshooting

  • Keyboard not responding:

    Ensure the keyboard is charged. Check the connection mode (wired, 2.4GHz, Bluetooth) and ensure it matches your device. Try switching to wired mode to rule out wireless issues. Restart your computer.

  • Wireless connectivity issues:

    For 2.4GHz, ensure the dongle is securely plugged in and try a different USB port. For Bluetooth, unpair and re-pair the keyboard with your device. Ensure no other devices are interfering with the signal.

  • RGB lighting not working or incorrect:

    Check brightness settings using Fn + Up Arrow / Down Arrow. Cycle through lighting modes with Fn + Space. Ensure the keyboard is not in a low-power mode that disables lighting.

  • Keys not registering or double-typing:

    This could be due to debris under the keycap or a faulty switch. Try cleaning the area or hot-swapping the affected switch with one of the spares provided.

  • Battery not charging:

    Ensure the USB-C cable is fully inserted into both the keyboard and the power source. Try a different USB cable or power adapter. Check the charging port for any obstructions.

Specifications

FeatureDetail
BrandAULA
ModelMini60 HE Pro
Layout60% Layout, US ANSI, QWERTY
Number of Keys61 Keys
Battery4000mAh Rechargeable
Connectivity2.4Ghz Wireless, Bluetooth, USB-C Wired
CompatibilityMac, WIN, Android
Keyboard Dimensions (L×W×H)299mm × 102mm × 37mm
Front Height2cm
Back Height2.8cm
Keyboard Weight0.62kg
Case MaterialPlastic
Plate MaterialAluminum Plate
StabilizersPlate-Mount Stabilizer
Mounting StructureTray-Mounted
Sound Dampening5 Layers (Sound-absorbing Foam, Fiber Switch Pad, PET Sound Dampening Foam, Bottom Foam, Bottom Silicone Pad)
Keycaps ProfileCherry
Keycaps MaterialPBT plastic
Hot Swappable SwitchesYes
RGB BacklightingYes, South-facing LEDs
Polling Rate8000Hz (2.4G & Wired Mode)
Scanning Rate128KHz
Latency0.125ms
Anti-GhostingYes
High-concerned chemicalNone

Magnetic Switch Specifications

FeatureMistcloud Magnetic SwitchStormrise Magnetic Switch
Switch TypeMagnetic, Pre-LubedMagnetic, Pre-Lubed
Trigger Force33±5gf32±5gf
Bottom-out Force53±5gf50±5gf
Trigger PointAdjustable Travel (0.1mm to 3.4mm)Adjustable Travel (0.1mm to 3.4mm)
Total Travel3.4±0.1mm3.4±0.1mm
Magnetic Flux80±15Gs to 480±60Gs (1.6mm PCB)80±15Gs to 480±60Gs (1.6mm PCB)

User Tips

  • Customize Actuation: Utilize the programmable web driver to adjust the actuation point of your magnetic switches. A lower actuation point (e.g., 0.1mm) is ideal for competitive gaming where every millisecond counts, while a higher point (e.g., 2.0mm or more) can help prevent accidental key presses during typing.
  • Experiment with DKS/Mod Tap: Explore the Dynamic Keystroke (DKS) and Mod Tap features in the web driver. These can significantly enhance your workflow or gaming performance by allowing a single key to perform different actions based on how it's pressed.
  • Keep Software Updated: Regularly check the official AULA website for updates to the web driver. Updates often include performance improvements, new features, and bug fixes.
  • Ergonomics: Make use of the keyboard's 2-level adjustable stands to find a comfortable typing angle that reduces strain during long sessions.
AULA MINI60 HE PRO Black Keyboard side view with kickstand

Adjustable kickstand for ergonomic comfort.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official AULA website. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.