Pinmany RZ-DF103 CAN Bus Decoder Instruction Manual

1. Introduction

The Pinmany RZ-DF103 is a CAN Bus data converter designed to integrate an Android head unit with the existing CAN Bus system of various Nissan vehicle models. This decoder facilitates communication between your car's systems and your aftermarket Android radio, enabling features such as steering wheel controls and other vehicle data to function correctly.

This product is intended for use with 7, 8, 9, and 10-inch Android head units.

Figure 1: Front view of the RZ-DF103 CAN Bus Decoder.

2. Specifications

Figure 2: Detailed product information and specifications.

Figure 3: Physical dimensions of the RZ-DF103 CAN Bus Decoder.

3. Vehicle Compatibility

This CAN Bus decoder is compatible with the following Nissan models and years:

• Nissan Terra: 2018-2020
• Nissan Kicks: 2016-2024
• Nissan Tiida: 2016-2021
• Nissan Lannia: 2016-2020
• Nissan Murano: 2015-2021
• Nissan Qashaqi: 2016-2022
• Nissan Qashaqi (Turkey): 2013-2015
• Nissan Teana: 2013-2020
• Nissan X-Trail: 2014-2025
• Nissan Rogue: 2014-2024
• Nissan Ruiqi6: 2021-2022
• Nissan Navara: 2016-2023
• Nissan JUKE: 2016-2019
• Nissan Pulsar: 2016-2019
• Nissan Serena: 2023-2024
• Nissan Sentra VS: 2016-2024
• Nissan Titan VS: 2019-2023
• Nissan Sylphy: 2016-2022
• Nissan Sylphy E-POWER: 2022
• Nissan Altima: 2019-2024
• Nissan Frontier (Brazil): 2022-2024
• Nissan Pathfinder: 2022-2024
• Nissan Leaf: 2024

The product can be adapted to 7, 8, 9, and 10-inch Android Head units.

Figure 4: Compatible Android Head Unit sizes.

4. Setup Instructions

4.1 Pre-Installation Considerations

• This product does not include cables. You will need to purchase compatible cables with a CAN Bus box if you do not have them.
• The CAN Bus box is only compatible with Android head units that have 8-pin connectors and support serial communication.
• Wiring requires certain professional knowledge. Please strictly follow the pin definition chart for correct wiring. Improper wiring can damage the CAN Bus decoder.
• Before purchasing, it is recommended to check your Android radio's CAN Bus settings to confirm if your car model can be displayed.

Figure 5: Important pre-purchase tips and cable compatibility.

4.2 Pin Definition

Refer to the diagram below for the 20-pin connector definition. Ensure all connections are made accurately according to this chart.

Figure 6: RZ-DF103 20-pin connector pinout.

4.3 Connection of Cable Adapter (Step 1)

Locate the 20-pin CAN plug on your wiring harness and connect it to the corresponding 20-pin socket on the CAN Bus Box.

Figure 7: Connecting the CAN Bus Box.

5. Operating Instructions

5.1 Setting up CAN Bus on the Android Head Unit (Step 2 & 3)

The exact steps for setting up the CAN Bus on your Android head unit may vary depending on the head unit's manufacturer and software version. The following steps provide a general guide. If you encounter difficulties, consult your head unit vendor's manual or support.

1. Access Settings: From the main screen of your Android head unit, navigate to the 'Car Settings' or 'Settings' menu.
2. Enter Factory Settings: You may need to enter a factory password to access advanced CAN Bus settings. Common passwords include: 3368, 1617, 8317, 8888. If none of these work, contact the seller of your Android radio.
3. Navigate to CAN Bus Settings: Within the factory settings, look for options like 'CAN Related Settings' or 'CarType Setting'.
4. Select Manufacturer: Choose 'Raise' as the CAN Bus Box manufacturer.
5. Select Car Model and Year: From the list, select your specific Nissan car model and the corresponding year range.
6. Save and Reboot: After selecting the correct settings, save your changes and reboot the Android head unit for the changes to take effect.

Figure 8: Android Head Unit CAN Bus setup process (Part 1).

Figure 9: Android Head Unit CAN Bus setup process (Part 2).

6. Maintenance

The Pinmany RZ-DF103 CAN Bus Decoder is designed to be maintenance-free. Ensure it is installed in a dry environment, away from extreme temperatures and direct sunlight. Do not attempt to open or modify the device, as this will void any potential support.

7. Troubleshooting

• Device not functioning: Verify that the operating voltage is within the +9V to +16V range. Voltages outside this range can damage the decoder.
• Features not working (e.g., steering wheel controls): Double-check all wiring connections against the pin definition diagram (Figure 6). Incorrect wiring is a common cause of issues.
• Cannot access CAN Bus settings on Android head unit: If the provided factory passwords (3368, 1617, 8317, 8888) do not work, contact the seller or manufacturer of your Android head unit for the correct password.
• Car model not listed in head unit settings: Ensure your car model and year are explicitly supported by the RZ-DF103. If your model is not listed, the decoder may not be compatible.
• General installation difficulties: If you are unsure about any part of the fitting process, it is highly recommended to seek professional assistance or contact support before attempting further steps to prevent damage.

8. Support

For any questions regarding the product, installation, or troubleshooting, please contact the seller directly. They provide professional after-sale service and will assist you until your concerns are resolved.

9. User Tips

• Always verify the operating voltage range (+9V to +16V) to prevent damage to the decoder.
• Carefully review the pin definition diagram before making any wiring connections.
• Before purchasing, check your Android head unit's CAN Bus settings to ensure your specific car model is recognized and can be selected.
• If you are not confident with car electronics installation, consider professional installation to ensure correct setup and avoid potential damage.