1. Introduction
This manual provides detailed instructions for the proper handling, installation, operation, and maintenance of your Sunon PE705-2 Quartz Watch Movement. The PE705-2 is a sophisticated quartz movement featuring three hands, three sub-dials, chronograph functions (center second and minute chronograph), a date display, and a Sun & Moon 24-hour indicator. Please read this manual carefully to ensure optimal performance and longevity of your movement.
2. Product Overview
The Sunon PE705-2 is a high-quality quartz movement designed for precision timekeeping and advanced functionality. It integrates multiple complications within a compact design, making it suitable for a variety of watch designs.



3. Specifications

| Feature | Description |
|---|---|
| Model | PE705-2 |
| Item Type | Movement |
| Movement Type | Quartz |
| Height | 4.52mm |
| Hands | 6 Hands (Hour, Minute, Center Chrono Second, Chrono Minute, 24-Hour, Date) |
| Functions | Chrono center second, Chrono minute, Sun & Moon 24-hour indicator, Date display |
| Date Wheel Font | English |
| Date Wheel Colors | White |
| Battery Type | SR920SW (Battery not included) |
| Jewels | 0 Jewels |
| Origin | Mainland China |
4. Setup
Proper handling and setup are crucial for the longevity and accuracy of your watch movement. Always work in a clean, dust-free environment and use appropriate watchmaking tools.
4.1. Installing the Stem
- Gently insert the stem into the movement's stem tube. Refer to Video 2.1 for a visual guide.
- Push the stem in until you feel a slight click, indicating it is securely seated. Do not force the stem.
4.2. Battery Installation
The PE705-2 movement requires an SR920SW battery (not included). Ensure correct polarity when installing the battery.
- Locate the battery compartment on the back of the movement (refer to Figure 2.2).
- Carefully open the battery clamp or cover.
- Insert the SR920SW battery with the positive (+) side facing up.
- Secure the battery clamp or cover.
4.3. Hand Installation
Install the watch hands (hour, minute, second, and sub-dial hands) in the correct order and alignment. Use specialized hand-setting tools to avoid damaging the movement or hands.
5. Operating Instructions
The PE705-2 movement offers timekeeping, date, 24-hour, and chronograph functions.
5.1. Setting the Time
- Pull the crown out to the furthest position (typically position 2 or 3, depending on the watch case).
- Turn the crown to move the hour and minute hands to the desired time. Ensure the 24-hour (Sun & Moon) indicator is correctly set for AM/PM.
- Push the crown back to its normal operating position.
5.2. Setting the Date and 24-Hour Indicator
- Pull the crown out to the first position (intermediate position).
- Turn the crown in one direction to adjust the date.
- Turn the crown in the other direction to adjust the 24-hour (Sun & Moon) indicator.
- Once set, push the crown back to its normal operating position.
5.3. Using the Chronograph Function
The chronograph allows for measuring elapsed time.
- Start: Press the top pusher (button) to start the chronograph (center second hand and minute chronograph sub-dial will begin moving).
- Stop: Press the top pusher again to stop the chronograph.
- Reset: Press the bottom pusher to reset all chronograph hands to their zero positions.
6. Maintenance
To ensure the longevity and accurate performance of your Sunon PE705-2 movement, follow these maintenance guidelines:
- Battery Replacement: Replace the SR920SW battery approximately every 2-3 years, or when the watch stops or runs erratically. Always use a fresh, high-quality battery.
- Cleaning: Keep the movement clean and free from dust and debris. Use a soft, dry brush or air blower for cleaning. Avoid using liquids directly on the movement.
- Storage: When not in use, store the movement in a dry, cool, and dust-free environment.
- Professional Service: For any complex repairs or internal cleaning, it is recommended to seek assistance from a qualified watchmaker.
7. Troubleshooting
If you encounter issues with your PE705-2 movement, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs slowly | Low or dead battery | Replace the battery (SR920SW). |
| Hands do not move after battery replacement | Battery incorrectly installed or contact issue | Check battery polarity and ensure proper contact. |
| Date or 24-hour indicator does not change | Incorrect setting or mechanical issue | Ensure the crown is in the correct position for adjustment. If issue persists, seek professional service. |
| Chronograph hands do not reset to zero | Mechanical misalignment or internal issue | Attempt to reset multiple times. If unsuccessful, professional calibration may be required. |
| Stem is loose or falls out | Stem not properly secured or release lever issue | Re-insert the stem carefully, ensuring it clicks into place. If the problem persists, the stem release mechanism may need inspection. |
For issues not listed above or if solutions do not resolve the problem, please consult a professional watchmaker.
8. User Tips
- When handling the movement, always use finger cots or clean gloves to prevent oils and dirt from transferring to the delicate components.
- Avoid exposing the movement to strong magnetic fields, as this can affect its accuracy.
- Do not attempt to adjust the date or 24-hour indicator between 9 PM and 3 AM, as this can damage the date change mechanism.
9. Warranty and Support
For warranty information or technical support, please refer to the seller's specific terms and conditions or contact the point of purchase. Keep your purchase records for any warranty claims.