1. Introduction
The X-GAMERX PowerTrain M360 is a 360mm All-In-One (AIO) CPU liquid cooler designed for efficient heat dissipation of core heating components such as the CPU and GPU within a computer chassis. Its purpose is to reduce hardware operating temperature, minimize operating noise, and ensure long-term stable operation of computer equipment. This cooler is compatible with high-end configurations and overclocking needs, enhancing overall aesthetics and performance.
Safety Tips
This product involves circuits, liquid pipelines, and precision hardware adaptation. Before use, please carefully read all contents of this manual and operate in strict accordance with the specifications to avoid safety issues such as hardware damage, liquid leakage, and short circuits caused by improper operation.
Function Introduction
This chassis water cooling system consists of a water block, circulating fluid, water pump, radiator, fan, and pipeline. Its core functions balance heat dissipation efficiency, quiet experience, and ease of use:
- Efficient Heat Dissipation: Adopting the principle of liquid heat conduction, it offers higher heat dissipation efficiency than traditional air cooling. It quickly absorbs heat from components like CPU and GPU, transfers it to the radiator, and discharges it via fans. This effectively controls hardware temperature under high load and overclocking conditions, preventing performance throttling and hardware aging.
- Quiet Operation: The water pump features a low-noise motor design. The radiator fan supports intelligent speed regulation, running at low speed under low load and speeding up automatically under high load. The overall operating noise is significantly lower than traditional air cooling radiators.
- Stability and Durability: The circulating fluid uses an anti-corrosion, anti-algae, and anti-freezing formula, preventing scaling and corrosion and extending system life. Core components (water block, water pump, radiator) are made of high thermal conductivity metal materials (copper/nickel/aluminum) with a solid structure and excellent sealing performance, reducing the risk of liquid leakage.
- Convenient Adaptation: The integrated water cooling is ready for installation out of the box. It is compatible with mainstream CPU sockets and chassis sizes. Some models support RGB light effect adjustment to enhance visual aesthetics.
- Dust-proof Protection: The closed circulation design reduces dust entry into the core heat dissipation area, minimizing hardware dust accumulation, reducing maintenance frequency, and avoiding dust affecting heat dissipation efficiency, thereby extending hardware service life.
2. Features
- 360° Magnetic Cover Digital Display Screen: The magnetic pump cover can freely rotate to adjust direction, suitable for various case viewing angles. It provides real-time CPU temperature monitoring.
- Global ARGB Light Effects: Features vibrant ARGB lighting on fans and pump head, offering customizable visual effects.
- Huge Copper Base: Extra-large copper base with precision chisel-tooth craftsmanship ensures full-coverage fit with the CPU lid for more efficient heat conduction and dissipation.
- Integrated Global Dashboard: Exclusive control software consolidates performance data (CPU/GPU temperature, power consumption, frequency, load, memory, and hard drive status) into a single interface for precise system bottleneck identification and performance optimization.
- Overheat Warning: The digital display activates flashing at 85°C to warn of overheating.
- Infinity Mirror High-Pressure Fan: Designed for optimal airflow and static pressure.
- Dual-Sided Evolving Infinity Mirror with ARGB Halo: Enhances aesthetic appeal with dynamic lighting.
- Precision Skived Copper Base: Micro-fin design on the copper base for improved heat transfer.
Figure 2.1: X-GAMERX M360 Water Cooler (Black Version)
Figure 2.2: X-GAMERX M360 Water Cooler (White Version)
Figure 2.3: 360° Magnetic Cover Digital Display Screen
Figure 2.4: Large-Scale Copper Base Design
Figure 2.5: Integrated Global Dashboard Software Interface
Figure 2.6: M360 Cooler Installed in a PC Case
Figure 2.7: Detailed Features Overview
3. Setup and Installation
3.1. Installation Preparation
- Check Product Integrity: After unpacking, confirm all components of the water cooling system are complete, including water block, radiator, fan, water pump (integrated in integrated type), pipeline, fixing screws, thermal grease, and manual. Check for any damage to the pipeline, loose connectors, or scratches/deformation on the radiator and water block surfaces.
- Prepare Tools: A Phillips screwdriver, anti-static gloves, and alcohol cotton pads (for cleaning hardware contact surfaces) are required. For split water cooling, additional pipe cutting tools and heat guns (for bending hard pipes) may be needed.
- Confirm Hardware Compatibility: Ensure the water cooling system is compatible with your computer chassis and CPU/GPU models. The radiator size (e.g., 120mm/240mm/360mm) must meet chassis installation requirements. The CPU water block must match the motherboard socket type (e.g., Intel LGA1700, AMD AM5).
3.2. Installation Steps (for Integrated Water Cooling)
- Power-off Preparation: Turn off the computer, unplug all power and data cables, open the chassis, remove any debris, and take anti-static measures (wear anti-static gloves).
- CPU Surface Cleaning: Gently wipe the CPU surface with alcohol cotton pads to remove residual thermal grease and dust, ensuring a clean surface for optimal heat conduction.
- Apply Thermal Grease: Apply an appropriate amount of thermal grease (rice grain size or straight line type) evenly on the CPU surface. Avoid applying too much to prevent overflow onto the water block or motherboard.
- Water Block Installation: Align the water block with the CPU position, gently press and fit it, then fix it to the motherboard CPU bracket with matching screws. Tighten screws diagonally with uniform force to avoid deflecting the water block or damaging the CPU.
- Radiator and Fan Installation: Fix the fan(s) on the radiator, planning the fan direction (exhausting air outward is recommended for heat discharge). Install the radiator to the corresponding position in the chassis and fix it firmly with screws.
- Pipeline Arrangement and Connection: Arrange the water cooling system pipelines neatly to avoid bending or twisting, ensuring appropriate length without tension. Check that all connectors are tightened for good sealing.
- Liquid Leakage Test (Key Step): Do not connect the motherboard power supply. Power the water pump only with an independent power supply and let it run for 1-2 hours. Carefully observe all pipeline connectors, water block, and radiator joints for any liquid drops or water stains. If leakage is found, stop immediately, check and retighten connectors, and contact after-sales service if necessary.
- Final Power-on: After a successful liquid leakage test, reconnect all power and data cables, arrange pipelines and lines inside the chassis, close the chassis, connect the host power supply, and start the computer. Confirm the water cooling system runs normally (pump running, fan rotating, no obvious abnormal noise).
3.3. Driver Installation
Drivers need to be installed to extract motherboard temperature. The computer motherboard must have a 9-pin USB 2.0 interface to support temperature display.
Driver download URL: http://www.powertrain-pc.com/
Figure 3.1: Pump Head Installed on Motherboard
Figure 3.2: ARGB Fans on Radiator
Figure 3.3: Radiator and Fan Assembly
Figure 3.4: Radiator Fins Detail
Figure 3.5: Exploded View of Pump Head
Figure 3.6: Precision Skived Copper Base
4. Daily Operation
4.1. Start-up and Shutdown
The water cooling system starts automatically and synchronously with the computer. When the computer is shut down, the water cooling system also stops running synchronously.
4.2. Status Check
The operating status (water pump speed, fan speed, liquid circulation status) can be checked via computer motherboard software or chassis indicator lights. During normal operation, there should be no obvious abnormal noise, and the fan speed will automatically adjust with the hardware load.
4.3. Light Effect Adjustment
For models supporting RGB light effects, the light effect color and mode can be adjusted through supporting software or chassis buttons to meet personalized visual needs. Avoid frequent mode switching to reduce hardware loss.
Video 4.1: Product showcase demonstrating features like digital display, ARGB lighting, and internal components.
5. Maintenance
5.1. Cleaning Cycle
Clean dust from the radiator surface every 1-3 months. Use compressed air to blow air outward from the inner side of the radiator to remove dust, preventing blockage and maintaining heat dissipation. Check pipeline connectors every 6 months for loosening or leakage.
5.2. Circulating Fluid Replacement
For split water cooling, it is recommended to replace the special circulating fluid every 6 months to 1 year. When replacing, completely drain the old fluid, clean the pipeline with a special cleaning agent, and then add new fluid. The circulating fluid of integrated water cooling does not need to be replaced by yourself. If the circulating fluid is significantly reduced or turbid, contact after-sales service.
5.3. Long-term Shutdown Maintenance
If the computer is not used for more than 1 month, turn off the power, unplug the power cable, and place the host in a dry and ventilated environment. Start the computer for 10-15 minutes regularly (every 15 days) to ensure the water cooling system circulates and prevent pipeline blockage and water pump aging.
5.4. Fault Maintenance
If a fault is found, do not disassemble and repair it yourself, especially core components (water pump, water block). Contact official after-sales service for inspection and repair by professional personnel.
6. Troubleshooting (FAQs)
| Frequently Asked Questions | Possible Causes | Solutions |
|---|---|---|
| Obvious water flow/bubble sound during water cooling operation | Air in the system is not completely exhausted; the water pump installation position is too high; pipeline bending leads to poor liquid circulation | 1. Tilt the chassis repeatedly, let the water pump run to discharge air. 2. Adjust pump installation position to ensure it's not at the highest point and radiator interface is higher than the pump. 3. Check and straighten bent pipelines. 4. If bubble sound persists after 1-2 days, contact after-sales service. |
| High computer hardware temperature and poor heat dissipation effect | Uneven or insufficient thermal grease; excessive dust on radiator; abnormal fan speed; pipeline blockage; poor contact between water block and CPU | 1. After shutdown, reapply thermal grease uniformly. 2. Clean dust from radiator with compressed air. 3. Check fan speed via motherboard software; if abnormal, restart computer or contact after-sales. 4. Check pipeline for blockage. 5. Check water block fixing, retighten screws. |
| Liquid leakage in the water cooling system | Loose pipeline connectors; damaged pipelines; aging seals of water block/radiator; damaged sealing structure during installation | 1. Immediately shut down, power off, unplug all cables. 2. Drain remaining liquid, wipe wetted hardware with anhydrous alcohol, dry thoroughly (24+ hours recommended). 3. Check leakage position; retighten loose connectors; replace damaged components. 4. Conduct liquid leakage test again before powering on. |
| Abnormal noise (creaking, friction sound) during water cooling operation | Damaged water pump bearing; dust accumulation or jamming of fan blades; loose pipeline colliding with chassis; water pump idling due to air intake | 1. Check fan blades, clean dust. 2. Check pipeline, straighten loose parts. 3. Discharge air from system and observe. 4. If abnormal noise persists, it's likely a water pump fault; contact after-sales. |
| Fan not rotating or abnormal speed | Fan power cable not connected properly; fan fault; abnormal motherboard control; water cooling system power supply fault | 1. After shutdown, check and firmly reinsert fan power cable. 2. Restart computer and observe fan. 3. Check fan control settings via motherboard software; restore default if abnormal. 4. If fan still abnormal, contact after-sales. |
| Gradually deteriorating heat dissipation effect of water cooling after long-term use | Reduced evaporation of circulating fluid; impurities and microorganisms blocking water channel; long-term dust accumulation on radiator; attenuation of water pump performance | 1. For split water cooling, add/replace circulating fluid and clean pipeline regularly. 2. Clean radiator dust. 3. For integrated water cooling over 3 years, pump performance may attenuate or fluid age; contact after-sales. |
7. User Tips
- Initial Inspection: Upon receiving the product, carefully inspect the packaging and contents for any signs of damage.
- Pump Connection: Be aware that the pump may use a 3-pin connector. If precise PWM control and monitoring are desired, ensure your motherboard supports this or consider alternative solutions.
- Software Compatibility: For temperature display and monitoring, ensure you install the necessary drivers from the provided URL. Users running Windows 11 should specifically verify compatibility and ensure their motherboard has a 9-pin USB 2.0 interface for the temperature display to function correctly.
- Gentle Handling: While the product is generally well-packaged, some users have reported issues with packaging damage. Handle the box with care during unboxing.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | M360 |
| Brand Name | POWER TRAIN |
| Type | CPU All In One |
| Radiator Type | 360mm |
| RGB Support | A-RGB |
| Fan Interface | 3PIN, 5v-3pin ARGB |
| Pump Interface | 4PIN, 5v-3pin ARGB |
| With Screen | Yes |
| With Liquid | Yes |
| Supported CPU Sockets | Socket AM3, LGA 1150, LGA 1155, LGA 1151, LGA1200, FM1, LGA 1156, AM4, Socket FM2, LGA1150, LGA 1700, Socket AM5 |
| Package | Yes |
| Origin | Mainland China |
| High-concerned chemical | none |
| Package Length | 49 cm |
| Package Width | 23 cm |
| Package Height | 17 cm |
| Package Weight | 2.373 kg |
9. Warranty & Support
9.1. Fault Feedback
If you find a product fault, contact the after-sales customer service through the official after-sales hotline or official account. Provide the product model, fault phenomenon, purchase date, and usage details.
9.2. Remote Troubleshooting
Based on the fault description, customer service will guide you through simple troubleshooting steps to resolve basic issues (e.g., loose pipelines, unexhausted air).9.3. Other Instructions
When discovering product issues, immediately preserve evidence such as photos/videos of faulty parts, screenshots of purchase receipts, and logistics delivery records. Provide complete unboxing videos if damage is found during unboxing.
Contact official after-sales channels, specify the product model, fault description, purchase time, and scenario of the issue, and submit the preserved evidence.
For a detailed user manual, please refer to the official PDF document: X-GAMERX M360 User Manual (PDF)
Important Safety Notice
ATTENTION: Not suitable for children aged 14 to touch after power is turned on.