1. Introduction
This manual provides detailed instructions for the PCBFUN ZK-TB21Q 2.1 Channel Bluetooth Amplifier Board. This high-performance audio module features APTX lossless decoding, a powerful 50W+50W+100W output, and a versatile design for various audio applications. Please read this manual carefully before installation and operation to ensure proper use and optimal performance.
2. Key Features
- APTX Lossless Decoding: Supports APTX lossless decoding and 24-bit DAC for delicate and high-quality sound.
- Enhanced Audio Purity: Features fever-level inductor LC filtering to enhance audio purity.
- Efficient Heat Dissipation: Designed with an enlarged heat sink to effectively reduce operating temperature.
- Superior Dynamic Response: Utilizes the original TI operational amplifier NE5532 for better dynamic response and high fidelity.
- Versatile Compatibility: Offers dual package compatibility (SOP and DIP) allowing for free replacement of operational amplifiers.
- Subwoofer Expansion: Includes a subwoofer expansion port with anti-POP control technology.
- Bluetooth Chip: Integrated QCC3034 Bluetooth chip for reliable wireless audio transmission.
Figure 2.1: Overview of high-end components including digital amplifier inductor, red-gray ring inductor, QCC3034 Qualcomm module, PCM5102 decoding chip, karaoke board expansion interface, subwoofer signal output expansion interface, and original TI NE5532 operational amplifier.
3. Specifications
Figure 3.1: Product parameters table.
| Parameter | Value |
|---|---|
| Product Name | 2.1 Channel Qualcomm BT Amplifier Board 50W+50W+100W |
| Product Model | ZK-TB21Q |
| Suitable Power Supply | 12-24VDC (Recommended: 24V, 8A or above DC power supply. AC power is not supported. If using a DC/DC boost module, adjust to 80% of limit voltage.) |
| Maximum Power Output | Left and right channels ≤ 50W, Subwoofer ≤ 100W |
| Compatible Speaker | 20-100W, 4-8 Ω |
| BT Chip | QCC3034 |
| BT Transmission Distance | 15 meters |
| Input Method | BT+AUX (BT has priority. Disconnect BT when using audio cable input.) |
| Number of Channels | 2.1 (Left channel + Right channel + Subwoofer) |
| Amplifier Chip | Two TI original TPA3116D2 |
| Protection Mechanism | Input undervoltage, overheating, overcurrent, short circuit protection, with input anti-reverse protection. |
| Product Dimensions (Integrated shell-less potentiometer) | 118 x 100 x 21mm |
| Product Dimensions (Integrated potentiometer with casing) | 118 x 100 x 26mm |
| Product Dimensions (External potentiometer) | 100 x 100 x 21mm |
Important Note on Power Supply:
Only when there is sufficient audio input and sufficient power supply voltage/current will there be sufficient output power. The higher the power supply voltage, the greater the output power, and the smaller the speaker impedance, the greater the output power. Please ensure that the power of the adapted power supply is greater than the actual working power of the amplifier to prevent damage.
Figure 3.2: Product dimensions.
Figure 3.3: Decoding comparison chart for various Bluetooth encoding bandwidths (kbps). Note: Bit-rates are not necessarily indicative of sound quality.
4. Package Contents
The standard package includes:
- 1x ZK-TB21Q Power Amplifier Board
- 1x Accessory Kit (may include potentiometers, cables, etc., depending on the selected variant)
Figure 4.1: Product packaging for the integrated potentiometer variant.
Figure 4.2: Product packaging for the external potentiometer variant.
5. Setup and Installation
Before connecting, ensure all components are powered off. Refer to the function diagram for connection points.
5.1. Power Supply Connection
- Connect a DC power supply (12-24VDC) to the "DC 12-24V" input terminal.
- You can use either the 5.5-2.5DC female socket or the 2P terminal block for power input.
- Ensure the power supply provides at least 24V and 8A for optimal performance.
- Caution: Do not use a 24V battery directly when fully charged, as it may cause overvoltage. AC power is not supported.
Video 5.1: Demonstration of connecting the power supply and speakers to the amplifier board, followed by Bluetooth pairing and audio playback.
5.2. Speaker Connections
- Connect your left channel speaker to the "Connect the left channel speaker" output.
- Connect your right channel speaker to the "Connect the right channel speaker" output.
- Connect your subwoofer speaker to the "Connect to subwoofer speaker" output.
- Ensure speakers are within the compatible range of 20-100W and 4-8 Ω.
5.3. Audio Input
- Bluetooth Input: The board supports Bluetooth audio input. Bluetooth has priority over AUX input.
- AUX Input: Connect an audio source via a 3.5mm audio cable to the "LINE IN input" port. When using AUX input, ensure Bluetooth is disconnected.
Figure 5.1: Detailed function diagram of the amplifier board, illustrating power input, speaker outputs, line-in, expansion ports, and control knobs.
5.4. Potentiometer Installation (if applicable)
The ZK-TB21Q is available in variants with integrated potentiometers (with or without casing) or external potentiometers. If you have the external potentiometer version, connect the potentiometer module to the corresponding ports on the main board.
Figure 5.2: ZK-TB21Q amplifier board with external potentiometers.
5.5. External Antenna Installation (Special Scenario)
The board comes with onboard antennas, providing a normal Bluetooth range of 10-15 meters. If the board is installed in a metal enclosure (which can block the signal) or if you require an extended Bluetooth range (20-30 meters), an external antenna is necessary.
- Purchase a 2.4G antenna, including an antenna extension cable and antenna rod.
- Connect the external antenna to the IPEX/IPX generation antenna base, which is already soldered onto the amplifier board.
Figure 5.3: Installation of an external antenna for improved Bluetooth range or when using a metal enclosure.
5.6. Installing ZK-AMP Microphone Front-End Board (Optional)
The amplifier board features expansion ports for connecting a microphone front-end board, such as the ZK-AMP. This allows for karaoke functionality.
- When using the expansion interface, ensure the dial switch on the ZK-TB21Q is turned to the OFF position.
- Connect Expansion Port 1 to the audio input of the MIC front stage board (reverb input).
- Connect Expansion Port 2 to the MIC front stage board reverb output or Qualcomm decoding board audio output.
- Provide a separate power supply (8-26VDC) to the microphone board.
Figure 5.4: Diagram for connecting a ZK-AMP microphone front-end board.
5.7. Subwoofer Expansion (Optional)
The subwoofer signal output expansion interface allows for cascading to a defense POP control port or connecting to a pure post amplifier board like the ZK-6002.
Figure 5.5: Subwoofer expansion setup with a ZK-6002 pure post amplifier board.
Figure 5.6: Subwoofer installation with level joint defense POP. The cascading anti-POP control interface prevents POP sound when cascading power is turned off.
6. Operation
6.1. Power On/Off
- The master volume knob typically includes a switch. Long press the master volume knob to turn the amplifier board On or Off.
6.2. Bluetooth Pairing
- Once powered on, the amplifier board will enter Bluetooth pairing mode.
- On your device (e.g., smartphone), search for Bluetooth devices and select "Wuzhi Audio" or "Wuzhi3034" to connect.
- If using an external button extension, a long press for 3 seconds on the PLAY/PAUSE button will disconnect Bluetooth.
6.3. Audio Adjustments
- Master Volume: Adjust the overall output volume using the Master Volume knob.
- Treble Adjustment: Use the Treble knob to adjust high frequencies.
- Bass Adjustment: Use the Bass knob to adjust low frequencies.
- Bass Signal Volume Adjustment: Fine-tune the subwoofer's volume.
- Bass Signal Frequency Adjustment: Adjust the subwoofer's crossover frequency (20-200Hz).
6.4. Button Extension Wiring (Optional)
If you have connected the optional button extension wiring, the following functions are available:
- PLAY/PAUSE: Single click to Play/Pause. Long press for 3 seconds to disconnect Bluetooth.
- PREV/VOL-: Short press for Previous track. Long press for Volume down.
- NEXT/VOL+: Short press for Next track. Long press for Volume up.
Figure 6.1: Schematic diagram of button extension wiring and functions.
7. User Tips
- For best sound quality, ensure your power supply meets or exceeds the recommended specifications (24V, 8A or above).
- When using the AUX input, always disconnect Bluetooth first to ensure the audio cable signal is prioritized.
- Experiment with the Bass Signal Frequency Adjustment to find the optimal crossover point for your subwoofer and main speakers.
- If experiencing signal interference or short Bluetooth range, consider installing an external 2.4G antenna.
8. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| No sound output | Incorrect wiring, insufficient power, Bluetooth not connected/AUX not selected, speaker issues. | Check all wiring connections (power, speakers, input). Ensure power supply meets requirements. Verify Bluetooth is paired or AUX cable is properly connected and Bluetooth is disconnected. Test speakers with another audio source. |
| Distorted sound | Overdriving the amplifier, poor quality audio source, incorrect impedance speakers, power supply ripple. | Reduce volume. Use a high-quality audio source. Ensure speaker impedance is 4-8 Ω. Check power supply for stability and sufficient current. |
| Bluetooth connection issues / Short range | Interference, metal enclosure, distance. | Ensure no other strong wireless signals are nearby. If in a metal enclosure, install an external antenna. Reduce distance between device and amplifier. |
| Amplifier overheating | Insufficient ventilation, excessive load, prolonged high volume. | Ensure adequate airflow around the heat sink. Reduce volume or load. Check speaker impedance. |
| "POP" sound when powering on/off | Normal for some amplifiers, or issue with cascading setup. | The board has anti-POP control for subwoofer expansion. Ensure proper connection to the "Joint defense POP control interface" if cascading. |
The ZK-TB21Q includes built-in protection mechanisms against input undervoltage, overheating, overcurrent, short circuit, and input anti-reverse protection. If the amplifier stops working, check for these conditions.
9. Maintenance
- Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the board to moisture, extreme temperatures, or direct sunlight.
- Ensure proper ventilation to prevent overheating, especially during prolonged use at high volumes.
- Regularly check all connections to ensure they are secure.
10. Safety Warnings
- Always disconnect power before making any connections or adjustments to the amplifier board.
- Do not exceed the recommended input voltage (12-24VDC). Using an incorrect power supply can damage the device and pose a safety risk.
- Avoid short-circuiting the speaker outputs or power input terminals.
- Keep the device away from water and other liquids.
- Do not attempt to modify or repair the board yourself unless you are a qualified technician. Unauthorized modifications may void the warranty and lead to damage or injury.
- This product is intended for indoor use only.