1. Important Safeguards
When using an electric appliance, basic precautions should always be followed, including the following:
- To provide continued protection against risk of electric shock, connect to properly grounded outlets only.
- Check that the main voltage corresponds to the voltage indicated on the rating label.
- This product is designed for domestic use only.
- Do not use outdoors.
- Do not leave the Steam mop unattended while switched on. Turn off the switch and unplug the electrical cord when not in use and before servicing.
- Do not allow to be used as a toy. Close attention is necessary when used near children, pets or plants.
- The appliance is not intended for use by young children or infirm persons without supervision.
- Young children should be supervised to ensure that they do not play with the appliance.
- Never direct steam towards people, animals or plants, or equipment containing components.
- Do not immerse the Steam mop into water or other liquids.
- Do not use with damaged cord or plug.
- Do not pull or carry by cord, use cord as a handle, close a door on the cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
- Never force the plug into an outlet.
- Do not use extension cords or outlets with inadequate current carrying capacity.
- Unplug after use. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or Steam mop with wet hands or operate without shoes.
- Do not insert any objects into openings. Do not use with any opening blocked.
- Do not use without floor cloth in place. Do not use without water in the water tank.
- When using on stairs use extra caution.
- Store your Steam mop in doors in a cool, dry area.
- Keep your work area well lighted.
- Never put cleaning detergents into the Steam mop. This will make the operation unsafe and damage the unit.
- Never block the steam openings of the product or place it on a soft surface, where the steam openings may be blocked. Keep the steam openings free of lint, hair, and the like.
- Use only as described in this manual. Use only manufacturer's recommended accessories.
- This appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been give supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
⚠️ WARNING-DANGER OF SCALDING
2. Product Components
Familiarize yourself with the parts of your INSE F2 Steam Mop:
- Handle
- Flow Control Switch
- Water Tank Cover
- Water Tank
- Mop Head
- Power Switch
- Carpet Glider
- Power Cord
- Mop Cloth
- Bend Nozzle
- Large Round Brush
- Small Round Brush
- Steaming Head
- Steaming Cloth
- Measuring Cup
- Steam Nozzle
3. How to Assemble and Use
Follow these steps to assemble and prepare your steam mop for use:
- Attach Mop Head: Securely attach the mop head to the main unit.
- Open Water Tank: Rotate the water tank cover counterclockwise to open it.
- Add Water: Use the provided measuring cup to add water into the water tank. The water tank has a capacity of 360ml.
- Attach Mop Cloth: Place the microfiber cloth pad onto the mop head. If cleaning carpets, place the carpet glider over the mop head with the cloth pad.
- Connect Power: Unwrap the power cord completely and plug it into a grounded electrical outlet.
4. Operating Instructions
The INSE F2 Steam Mop provides an effective and hygienic cleaning solution by converting water into superheated steam.
Power Button Operations:
- Single Press: Switches to low-power mode (22g/min steam for daily shine).
- Double Press: Switches to high-power mode (30g/min steam for deep cleaning).
- Long Press: Powers off / Shuts down the unit.
Cleaning Process:
- The steam mop heats up in just 15 seconds.
- It produces high-temperature steam (>212°F / 100°C) to effectively remove stubborn stains and bacteria.
- To disinfect a specific area, position the steamer over the area for a minimum of eight seconds.
- The flexible angle adjustment allows you to clean under furniture and reach tight corners.
Suitable Surfaces:
The steam mop is designed to thoroughly clean various floor surfaces, including:
- Hardwood floors
- Laminate
- Marble & Tile
- Carpet (with carpet glider attachment)
Important Warnings:
- On surfaces that have been treated with wax, the wax may be removed by the heat and steam action.
- Do not use on unsealed wood floors or let unit stand on any wood floor for an extended period of time. This could cause the wood grain to rise.
- When using on vinyl, linoleum or any other heat sensitive floors, use extra caution. Too much heat can melt down glue in the flooring.
- It is recommended that a sample cleansing be carried out on an isolated area of the floor.
- It is also recommended that you check the use and care instructions of the surface from the floor manufacturer to ensure suitability to steam cleaning.
5. Cleaning and Maintenance
Proper cleaning and maintenance will ensure the longevity and optimal performance of your steam mop.
CAUTION: Prior to cleaning or maintenance, isolate the unit by removing the cord from the power socket. Do not immerse the unit in water.
- Microfiber Cloth pads can be machine washed in hot water and tumbled dry.
- Wipe the steamer with a soft cloth.
- The Steam mop should only be used with its own specially developed floor cloths and Filter (spare Cloth pads and Filters are available from your retailer).
- After cleaning, unplug the power cord, wait for the mop head to cool down, then remove the mop pad. The mop pad is machine washable.
- Use a dry cloth or paper towel to wipe away any water stains from the water tank and the main unit.
- Clean and dry all used accessories, then store them properly.
- Wrap the power cord around the cord hook on the machine, then store it. Note: Do not place the machine in direct sunlight to avoid damage.
6. Troubleshooting Guide
If you encounter any issues with your steam mop, refer to the table below for solutions.
CAUTION: Prior to troubleshooting, isolate the unit by removing the cord from the power socket.
| Problem | Solution |
|---|---|
| LED Indicator is not on. | Ensure the Steam mop power cord is correctly plugged in. Ensure circuit breaker is operational. Try operating the Steam mop from another power outlet. |
| The Steam mop will not release steam. | Ensure the water tank is filled with water and located properly. |
| Pale residue left on the floor. | Caused by leaving the Steam mop in the same position for too long time. Can be removed with household white vinegar or a decalcifying product. Alternatively reheat the area for one minute and residue should be removed. |
CAUTION: Do not overheat area.
7. Specifications
| Attribute | Value |
|---|---|
| Model No. | F2 |
| Brand | INSE |
| Rated Power | 1300W |
| Rated Voltage | AC 120V~60Hz |
| Water Tank Capacity | 360ML |
| Power Cord Length | 4.75M |
| Steam Volume | Low: 22g/min, High: 30g/min (Two level adjustment) |
| Heat-up Time | 15 seconds |
| Steam Temperature | >212°F (100°C) |
| Weight | 2.3kg |
| Material | ABS |
| Feature | Steam function |
| Certification | CE |
8. User Tips
- For optimal performance, especially in areas with hard water, consider using distilled water in the water tank to prevent mineral buildup and pale residue on floors.
- Always ensure the microfiber mop pad is clean before use for the best cleaning results.
- When cleaning delicate surfaces, test a small, inconspicuous area first to ensure compatibility with steam cleaning.
9. Warranty and Support
NOTE: THIS WARRANTY TERM GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
12-month Warranty & Lifetime Customer Support
This warranty applies only to eligible purchases made directly from authorized distributors. Warranty coverage applies to the original owner and to the original product only and is not transferable.
How to Initiate a Warranty Claim
If your appliance operates improperly while in use under normal household conditions within the warranty period, please contact our customer support via support@vacservice.vip.
The warranty will not apply in cases of:
- Normal wear and tear
- Incorrect use, e.g., overloading of the appliance, use of non-approved accessories
- Use of force, damage caused by external influences
- Damage caused by non-observance of the user manual, e.g., connection to an unsuitable mains supply or non-compliance with the installation instructions
- Partially or completely dismantled appliances
For additional guidance, a detailed user manual is available in PDF format: View User Manual (PDF).
Please do not hesitate to contact us whenever you want, we are always more than happy to help you!
FC CE ROHS
MADE IN CHINA
