Important Safety Tips
This product involves circuits, liquid pipelines, and precision hardware adaptation. Before use, please carefully read all contents of this manual and operate in strict accordance with the specifications to avoid safety issues such as hardware damage, liquid leakage, and short circuit caused by improper operation.
ATTENTION: Not suitable for children aged 14 to touch after power is turned on.
1. Function Introduction
This chassis water cooling system consists of a water block, circulating fluid, water pump, radiator, fan, and pipeline (integrated type with integrated pipeline, split type with assemblable pipeline). Its core functions are as follows, balancing heat dissipation efficiency, quiet experience and ease of use:
- Efficient Heat Dissipation: Adopting the principle of liquid heat conduction, it has higher heat dissipation efficiency than traditional air cooling. It can quickly absorb the heat generated by core components such as CPU and GPU, transfer the heat to the radiator through the circulation system, and then discharge it out of the chassis by the fan. It can effectively control the hardware temperature under high load and overclocking conditions, avoid performance throttling and hardware aging caused by overheating, and is suitable for high-performance equipment such as high-end game hosts and design workstations.
- Quiet Operation: The water pump adopts a low-noise motor design, with weak noise during operation; the radiator fan supports intelligent speed regulation, running at low speed under low load and automatically speeding up under high load. The overall operating noise is much lower than that of traditional air cooling radiators, creating a quiet working environment for users.
- Stability and Durability: The circulating fluid adopts an anti-corrosion, anti-algae and anti-freezing formula, which can effectively avoid scaling and corrosion on the inner wall of the pipeline and extend the service life of the system; core components (water block, water pump, radiator) are made of high thermal conductivity metal materials (copper/nickel/aluminum), with a solid structure and excellent sealing performance, reducing the risk of liquid leakage.
- Convenient Adaptation: The integrated water cooling is ready for installation out of the box without assembly, compatible with mainstream CPU sockets and chassis sizes; the split water cooling supports personalized pipeline layout, which can be flexibly adjusted according to the chassis space and hardware configuration to meet the personalized needs of DIY enthusiasts. Some models support RGB light effect adjustment to enhance the visual texture of the host.
- Dust-proof Protection: The closed circulation design can reduce dust entering the core heat dissipation area, reduce the probability of hardware dust accumulation, reduce the frequency of hardware maintenance, and avoid dust affecting heat dissipation efficiency, indirectly extending the service life of computer hardware.
2. Product Specifications
| Attribute | Value |
|---|---|
| Model Number | M240 |
| Brand Name | POWER TRAIN |
| Type | CPU All In One |
| Radiator Type | 240 MM |
| Supported CPU Sockets | Socket AM3, LGA 1150, LGA 1155, LGA 1151, LGA1200, FM1, LGA 1156, AM4, Socket FM2, LGA1150, LGA 1700, Socket AM5 |
| With Screen | Yes |
| RGB Support | A-RGB |
| Fan Interface | 4PIN, 5v-3pin ARGB |
| Pump Interface | 3PIN, 5v-3pin ARGB |
| With Liquid | Yes |
| Package Included | Yes |
| High-concerned chemical | none |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 36 cm x 24 cm x 15 cm |
| Package Weight | 1.911 kg |
Diagram of M240 cooler highlighting features like Temperature Display Panel, Leak-Proof, Ceramic Bearing, Rapid Cooling.
3. Usage Instructions
3.1. Installation Preparation
- Check Product Integrity: After unpacking, confirm that all components of the water cooling system are complete, including water block, radiator, fan, water pump (integrated in integrated type), pipeline, fixing screws, thermal grease, manual, etc. At the same time, check whether the pipeline is damaged, the connector is loose, and whether the surface of the radiator and water block has scratches or deformation.
- Prepare Tools: A Phillips screwdriver, anti-static gloves, and alcohol cotton pads (for cleaning hardware contact surfaces) are required. For split water cooling, additional pipe cutting tools and heat guns (for bending hard pipes) are needed.
- Confirm Hardware Compatibility: Confirm that the water cooling system is compatible with the computer chassis and CPU/GPU models, the radiator size (120mm/240mm/360mm, etc.) meets the requirements of the chassis installation position, the CPU water block matches the motherboard socket type (such as Intel LGA1700, AMD AM5, etc.), and the GPU water block (if any) matches the graphics card PCB model.
3.2. Installation Steps (for Integrated Water Cooling)
Split Water Cooling can refer to the core process and operate in conjunction with the dedicated manual.
- Power-off Preparation: Turn off the power of the computer host, unplug all power cables and data cables, open the host chassis, take out excess debris inside the chassis, and take anti-static measures (wear anti-static gloves).
- CPU Surface Cleaning: Gently wipe the CPU surface with alcohol cotton pads to remove residual old thermal grease and dust, ensuring the surface is clean and free of debris to avoid affecting heat conduction effect.
- Apply Thermal Grease: Take an appropriate amount of thermal grease (rice grain size or straight line type), evenly apply it on the CPU surface. Do not apply too thick to avoid thermal grease overflowing and contaminating the water block or motherboard.
- Water Block Installation: Align the water block with the CPU position, gently press and fit it, fix the water block on the motherboard CPU bracket with matching screws. When tightening the screws, apply uniform force diagonally to avoid deflecting the water block or damaging the CPU.
- Radiator and Fan Installation: Fix the fan on the radiator, plan the fan direction (it is recommended to exhaust air outward to speed up heat discharge), then install the radiator to the corresponding installation position of the chassis, and fix it firmly with screws to ensure that the radiator is not loose or shaking.
- Pipeline Arrangement and Connection: Arrange the pipelines of the water cooling system neatly to avoid pipeline bending, twisting (to prevent affecting liquid circulation), ensure the pipeline length is appropriate without tension; check whether all connectors are tightened to ensure good sealing.
- Liquid Leakage Test (Key Step): Do not connect the motherboard power supply, drive the water pump only with an independent power supply, let the water pump run for 1-2 hours, carefully observe all pipeline connectors, water block and radiator joints, and confirm that there is no liquid drop or water stain leakage. If liquid leakage is found, stop operation immediately, check the connectors and retighten them, and contact after-sales service if necessary.
- Final Power-on: After the liquid leakage test is correct, reconnect all power cables and data cables, arrange the pipelines and lines inside the chassis, close the chassis, connect the host power supply, start the computer, and confirm that the water cooling system is running normally (water pump is running, fan is rotating, no obvious abnormal noise).
The M240 cooler installed inside a PC case, showcasing the radiator with two fans at the top and the pump head on the CPU, all with vibrant ARGB lighting.
Detailed breakdown of the pump head components, illustrating the magnetic cover, ARGB light strip, pump body, and precision skived copper base for optimal heat transfer.
4. Daily Operation
- Start-up and Shutdown: After the computer starts, the water cooling system starts automatically synchronously without manual operation; after the computer is shut down, the water cooling system stops running synchronously.
- Status Check: The operating status of the water cooling system (water pump speed, fan speed, liquid circulation status) can be checked through the computer motherboard software or chassis indicator light. During normal operation, there is no obvious abnormal noise, and the fan speed is automatically adjusted with the hardware load.
- Light Effect Adjustment (if available): For models supporting RGB light effects, the light effect color and mode can be adjusted through supporting software or chassis buttons to meet personalized visual needs. Avoid frequent mode switching during adjustment to reduce hardware loss.
Close-up of the digital display on the pump head showing 38°C, with ARGB lighting. The display provides real-time CPU temperature monitoring and flashes an alarm if the temperature reaches 85°C.
Screenshot of an 'Integrated global dashboard' software interface, providing comprehensive monitoring of CPU usage, memory usage, hard disk usage, GPU usage, and temperatures for system optimization.
Product feature video demonstrating the cooler's ARGB effects, digital display, magnetic cover, copper base, and installation process.
5. Maintenance Notes
- Cleaning Cycle: Clean the dust on the radiator surface every 1-3 months. Compressed air can be used to blow air outward from the inner side of the radiator to remove dust, avoiding dust blocking the radiator fins and affecting the heat dissipation effect; check the pipeline connectors every 6 months to confirm that there is no loosening or leakage.
- Circulating Fluid Replacement: It is recommended to replace the special circulating fluid for split water cooling every 6 months to 1 year. When replacing, completely drain the old fluid, clean the pipeline with special cleaning agent, and then add new fluid to avoid impurities and scale in the old fluid blocking the water channel; the circulating fluid of integrated water cooling does not need to be replaced by yourself. If the circulating fluid is significantly reduced or turbid, contact after-sales service for processing.
- Long-term Shutdown Maintenance: If the computer is not used for a long time (more than 1 month), turn off the power, unplug the power cable, place the host in a dry and ventilated environment, start the computer to run for 10-15 minutes regularly (every 15 days), let the water cooling system circulate, and avoid pipeline blockage and water pump aging.
- Fault Maintenance: When a fault is found in the water cooling system, do not disassemble and repair it by yourself, especially the core components (water pump, water block). Contact the official after-sales service for inspection and repair by professional personnel.
6. Frequently Asked Questions (FAQs)
| Frequently Asked Questions | Possible Causes | Solutions |
|---|---|---|
| Obvious water flow/bubble sound during water cooling operation | Air in the system is not completely exhausted; the water pump installation position is too high (at the highest point of the circulation system); pipeline bending leads to poor liquid circulation | 1. Tilt the chassis repeatedly, let the water pump run to discharge the air in the system; 2. Adjust the water pump installation position to ensure that the water pump is not at the highest point and the radiator interface is higher than the water pump; 3. Check the pipeline, straighten the bent parts to ensure smooth liquid circulation; 4. If the bubble sound still does not disappear after running for 1-2 days, contact after-sales service for inspection. |
| High computer hardware temperature and poor heat dissipation effect | Uneven or insufficient application of thermal grease; excessive dust on the radiator blocking the fins; abnormal fan speed; pipeline blockage or poor liquid circulation; poor contact between the water block and CPU | 1. After shutting down and powering off, reapply thermal grease to ensure it is uniform and appropriate; 2. Clean the dust on the radiator with compressed air; 3. Check the fan speed through the motherboard software. If the speed is abnormal, restart the computer or contact after-sales service; 4. Check the pipeline. If blockage is suspected, contact after-sales service for processing; 5. Check the fixing of the water block, retighten the screws to ensure close fit. |
| Liquid leakage in the water cooling system | Loose pipeline connectors; damaged pipelines; aging seals of water block/radiator; damaged sealing structure during installation | 1. Immediately shut down and power off, unplug all power cables and data cables to prevent hardware short circuit; 2. Drain the remaining liquid in the system, wipe the wetted hardware surface with anhydrous alcohol, and dry it thoroughly (it is recommended for more than 24 hours); 3. Check the leakage position. If the connector is loose, retighten it; if the pipeline is damaged or the seal is aging, stop using it immediately and contact after-sales service to replace the components; 4. Conduct the liquid leakage test again before powering on. |
| Abnormal noise (creaking, friction sound) during water cooling operation | Damaged water pump bearing; dust accumulation or jamming of fan blades; loose pipeline colliding with the chassis; water pump idling due to air intake | 1. Check the fan blades, clean the dust to ensure no jamming; 2. Check the pipeline, straighten the loose parts to avoid colliding with the chassis; 3. Discharge the air in the system and observe whether the noise disappears; 4. If the abnormal noise still exists, it is likely to be a water pump fault. Shut down immediately and contact after-sales service for inspection and replacement of the water pump. |
| Fan not rotating or abnormal speed | Fan power cable not connected properly; fan fault; abnormal motherboard control; water cooling system power supply fault | 1. After shutting down and powering off, check the connection of the fan power cable and reinsert it firmly; 2. Restart the computer and observe whether the fan returns to normal; 3. Check the fan control settings through the motherboard software. If the settings are abnormal, restore the default; 4. If the fan still does not rotate or the speed is abnormal, contact after-sales service to inspect the fan or power supply components. |
| Gradually deteriorating heat dissipation effect of water cooling after long-term use | Reduced evaporation of circulating fluid; impurities and microorganisms in the circulating fluid blocking the water channel; long-term dust accumulation on the radiator without cleaning; attenuation of water pump performance | 1. For split water cooling, add special circulating fluid in time, replace the circulating fluid and clean the pipeline regularly; 2. Clean the dust on the radiator; 3. For integrated water cooling that has been used for more than 3 years, the water pump performance may be attenuated or the circulating fluid may be aged. Contact after-sales service to check whether the product needs to be replaced. |
7. User Tips
- The cooler is generally easy to assemble and provides good temperature control, keeping CPU temperatures low even under load.
- The product packaging is robust and protects the contents well during transit.
- The removable screen and USB-C connection on the pump head are convenient features.
Important Driver Warning: Drivers are required to extract motherboard temperature for display. The computer motherboard must have a 9-pin USB 2.0 interface to support temperature display. Please be cautious when downloading and installing drivers from third-party websites. One user reported malware detection (Trojan) after installing software from the official website. Exercise extreme caution and use antivirus software.
Driver download URL (use with caution): http://www.powertrain-pc.com/
8. After-sales Service & Support
8.1. Fault Feedback
After finding a product fault, contact the after-sales customer service through the official after-sales hotline official account, and explain the product model, fault phenomenon, purchase date and usage.
8.2. Remote Troubleshooting
According to the fault description, the customer service will guide the user to conduct simple troubleshooting and try to solve basic faults (such as loose pipelines, unexhausted air, etc.).
8.3. Other Instructions
- When users discover product issues, they must preserve evidence immediately, including photos/videos of the faulty parts, screenshots of purchase receipts, and logistics delivery records (provide complete unboxing videos if damage is found during unboxing).
- Contact official after-sales channels, specify the product model, fault description, purchase time, and scenario of the issue, and submit the preserved evidence.