1. Introduction
The GEYA GYRC-ZN01 IoT Smart RCBO Breaker is an advanced circuit breaker designed for intelligent power distribution. It features automatic reclosing, 4G/WiFi/RS485 communication control, and comprehensive protection against overload, short-circuit, and leakage. With its compact design and remote control capabilities, it offers enhanced safety and convenience for various applications.

Figure 1: GEYA GYRC-ZN01 IoT Smart RCBO Breaker with highlighted features.
Key Features:
- Compact Design: 40% smaller than traditional circuit breakers, suitable for various small distribution box installations.
- High Breaking Capacity: Exceeds 10kA for quick short-circuit and overload current cutoff.
- Intelligent Remote Control: Automatic/manual reclosing via mobile APP or cloud platform.
- Multi-protocol Communication: Supports 4G (Full Netcom), WiFi dual-mode, and RS485 wired interfaces.
- Precise Measurement: Built-in high-precision chip for real-time monitoring of voltage, current, power, and electricity consumption (error rate < ±1%).
- Comprehensive Protection: Overvoltage, undervoltage, phase loss, overload, high temperature, and leakage protection.
- LCD Display: Provides human-machine operation interface and displays relevant information.
- Durable Construction: V0-level flame retardant engineering plastic shell, silver-plated copper alloy conductive parts.
2. Safety Information
WARNING: Installation and maintenance must be performed by a qualified electrician to prevent electric shock or damage to the device.
- Ensure the power supply is completely disconnected before any installation or wiring work.
- Never reverse the incoming and outgoing lines of the product.
- Verify all wiring connections are correct before powering on the device. Pay special attention to the correct connection of N (Neutral) and PE (Protective Earth) lines.
- Do not install or operate the device with wet hands.
- Ensure cables are securely fastened and reliable.
- The leakage function of GYRC-ZN01-PE models should not be turned off. Set the leakage parameter value to 30mA (recommended) or as per actual application scenario.
3. Product Overview
3.1 Panel Description and Components

Figure 2: Panel Description and Wiring Points.
- Electricity Metering Module: Monitors power consumption.
- Anti-random Wiring Cover Plate: Prevents unauthorized access to wiring.
- Repair Safety Lock: Secures the device during maintenance.
- Miniature Circuit Breaker Body: Core component for current switching and protection.
- Parameter Information Display Area: LCD screen for displaying settings and data.
- Running Status Light: Indicates operational status.
- Manual Switch Operation Handle: For manual opening and closing of the circuit breaker.
- Button Operation Control Area: Buttons for menu navigation and control.
- Leakage, Temperature Module: Detects leakage current and monitors temperature.
3.2 Product Modules and Button Functions

Figure 3: Product Modules and Button Functions.
- Cover: Prevents random wiring.
- Circuit Breaker Body: Functions as current switching, short circuit, and overload protection.
- Circuit Breaker Contact Indication: Indicates circuit breaker status (red: open, green: closed).
- Operating Handle: Manually push to control closing and opening.
- Measurement, Leakage Detection Module: Detects current, voltage sampling, leakage signals, and terminal temperature signals.
- Leakage Test Button: Detects if the leakage function has failed. Press once a month for self-test.
- Local Settings and Check Button:
- Press to enter/confirm menu input.
- Press once to jump up one line/increase number.
- Press once to jump down one line/decrease number.
- In setting/viewing state, press to return to upper menu; if in fault alarm state, press to eliminate alarm sound.
- Status Indication: Indicates product closing/opening status, communication status, fault, SIM card insertion status.
- LCD Display: Human-machine operation interface, displays relevant information.
- Control Body: Controls closing/opening of circuit breakers and collects/processes electrical parameters.
- PE Indication: If front-end PE is connected normally, indicator is green; if not, no light, audible alarm, and "PE line disconnection alarm" on display.
4. Specifications
4.1 Main Technical Parameters (GYRC-ZN01-100AP)
| Item | Description |
|---|---|
| Product Model | GYRC-ZN01-100AP (Automatic Reclosing) |
| Compliant with | GBT 16917 CQC1149 |
| Poles Number | 2P/4P |
| Rated Voltage | Single-phase AC230V / Three-phase AC400V 50Hz |
| Rated Current | 32A, 63A, 100A |
| Trip Type | C type (other types can be customized) |
| Short Circuit Breaking Capacity | Icu=Ics=6KA |
| Mechanical Life | More than 12,000 times |
| Electrical Life | More than 6,000 times |
| Closing Time | Less than 1.5s |
| Opening Time | Less than 1.0s |
| Measurement Accuracy | 1.0 |
| Leakage Operating Value | 30, 50, 100, 200, 300, 500mA Optional |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| High-concerned chemical | None |
4.2 Dimensions and Weight
- Length: 15 cm
- Width: 10 cm
- Height: 5 cm
- Weight: 0.941 kg

Figure 4: Product Wiring Diagram (2P and 4P).
5. Setup
5.1 Product Wiring
Refer to Figure 4 for detailed wiring diagrams for both 2P and 4P configurations. Ensure all connections are secure and follow local electrical codes.
- Incoming Terminal: Connect the main power supply (L1, L2, L3, N) to the 'IN' terminals.
- Outgoing Terminal: Connect the electrical load to the 'OUT' terminals.
- PE Connection: For models with PE (Protective Earth), ensure it is correctly connected.
- SIM Card: For 4G versions, ensure the SIM card is correctly inserted before installation.
5.2 Tuya Smart APP Installation and Networking
The GEYA GYRC-ZN01 can be controlled remotely via the Tuya Smart APP. Follow these steps to set up the app and connect your device:
- Download Tuya Smart APP: Search for "Tuya Smart" in your mobile app store (Android/iOS) and install it.
- Register/Login: Open the app, register for a new account, or log in if you already have one.
- Add Device:
- Ensure the circuit breaker is powered on and the indicator light is flashing slowly (indicating pairing mode).
- In the Tuya Smart APP, tap "Add Device" or the "+" icon.
- The app will search for nearby devices. Select the "Breaker" option.
- Connect to a 2.4GHz Wi-Fi network and enter the password.
- Wait for the product to be added successfully.
- Remote Control Page: After successful addition, enter the product control page in the app.
Video 1: Tuya Smart App setup and remote control demonstration.

Figure 5: Tuya App Connection Diagram.
6. Operation
6.1 Remote Control via Tuya App
Once connected to the Tuya Smart App, you can:
- Open/Close: Remotely control the circuit breaker's on/off state.
- Set Timers: Add schedules for automatic opening and closing at specific times.
- Monitor Parameters: View real-time current, voltage, temperature, and total consumption.
- Adjust Protection Settings: Modify overvoltage, undervoltage, overload, and leakage protection values.
- Automatic Reclosing: Enable or disable the auto-reclosing function for automatic power restoration after a trip.
6.2 Menu Function Operation Instructions (via LCD Display)

Figure 6: Menu Function Operation Instructions.
- Input Password: Press the menu button. The default password is "0000". Use the up/down keys to adjust digits and the confirm button to move to the next digit.
- Enter Menu: After entering the correct password, you can access sub-menus like Parameters, Records, Functions, Maintenance, and About.
- Select Menu: Use the up/down keys to select the desired menu, then press the confirm button to enter.
- Navigate/Set Parameters: Within a sub-menu, use the up/down keys to navigate or adjust values. Press the confirm button to save changes or enter a deeper level.
- Exit: Press the exit button to return to the previous menu or the main display.
- Direct View Electrical Parameters: Press the up/down keys directly from the main screen to view electrical parameters.
- Switch Control: Long press the green ON/OFF button to control the switch opening and closing. Short press to return to the upper menu.
6.3 Menu Description
- Parameters: Set values for over/under voltage, leakage, current, temperature, power, etc.
- Record: View switching time records, fault causes, and operations.
- Communication: Set communication method (WIFI, MOTT, RS485), baud rate, and device type.
- Function: Configure switch protection functions (off, alarm, trip).
- Display: Set display language (Chinese or English).
- Number of Times: Query the number of times the switch has operated in each state.
- Maintenance: Restore factory settings, configure networking mode, restart device.
- About: View product software version, communication module IEMI code, and SIM card code.
7. Maintenance
- Leakage Test: The leakage test button should be pressed once a month for self-test to ensure the leakage function is working correctly.
- Factory Reset: If necessary, you can restore factory settings via the "Maintenance" menu in the LCD display.
- Firmware Updates: Check the Tuya Smart App for any available firmware updates for your device to ensure optimal performance and security.
8. Troubleshooting
8.1 Remote Control Not Responding
- Check SIM Card (for 4G versions): Verify that the SIM card is not in arrears, loose, or damaged. Enter the "About" menu to check the SIM code. If the code is visible, the card might be in arrears; recharge it. If not visible, try reinserting the SIM card. If still not visible, the card may be damaged and needs replacement.
- Check RS485 Symbol: If the RS485 symbol is not displayed on the main interface, check if the RS485 interface is loose.
8.2 Sub-device Not Responding
- Check Device Online Status: Ensure the device is online in the Tuya Smart App.
- Re-configure Network: If the device is offline, try re-configuring the network connection through the app.
- Device Malfunction: If network configuration fails, there might be a problem with the device itself, requiring inspection or repair.
9. User Tips
- For optimal smart functionality, ensure your Wi-Fi network is stable and operates on the 2.4GHz band.
- Regularly check the real-time data (voltage, current, power) through the Tuya app to monitor your electricity consumption and identify any anomalies.
- Utilize the scheduling feature in the app to automate the on/off times for connected appliances, which can help save energy.
- Familiarize yourself with the LCD menu navigation for quick adjustments and status checks directly on the device.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official GEYA documentation or contact GEYA customer service. A user manual in PDF format is available for download: GEYA GYRC-ZN01 User Manual (PDF).